Hi, im getting this error on my ext DVD writer I just got when using IMG Burn. What can be done? thx.
I also tried burning DVD to DVD & no succes either. Mayby my ext drive is a lemon? its odd since it does fine when ripping/playing DVDs. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero Version: 6.6.0.8 (Nero Express) Recorder: <MAD DOG MD-16XDVD9> Version: 2.F6 - HA 2 TA 0 - 6.6.0.8 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 102C - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHV2060AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 MAD DOG MD-16XDVD9 E: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1279MB (1309928kB) Free physical memory: 792MB (811496kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.2.2006 DVD-Copy on the fly 10:24:46 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:24:46 PM #2 Text 0 File Writer.cpp, Line 122 Writer MAD DOG MD-16XDVD9 running 10:24:46 PM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1470880 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:24:46 PM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1470880 = 1470880, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:24:46 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 10:24:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1470879 (326:51.54, 2872MB) 10:24:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 10:24:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 10:24:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:24:47 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1470880 (1470880) = #1470880/326:51.55 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1470880 blocks [MAD DOG MD-16XDVD9] -------------------------------------------------------------- 10:24:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3012362240, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1470880 | lead-out | 1 | 0x41 | 0x00 10:24:47 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 10:24:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:24:47 PM #14 Text 0 File DVDR.cpp, Line 2356 Recording mode: Sequential Recording Mode 10:24:47 PM #15 Text 0 File Mmc.cpp, Line 21206 Set BUFE: Buffer underrun protection -> ON 10:24:47 PM #16 Text 0 File DVDR.cpp, Line 2502 Start write address at LBA 0 DVD high compatibility mode: Yes 10:24:47 PM #17 Text 0 File Cdrdrv.cpp, Line 8442 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:25:04 PM #18 Text 0 File Cdrdrv.cpp, Line 1287 22:25:04.016 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later 10:25:14 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x05260000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 10:25:14 PM #20 SCSI -1114 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x055F0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 10:25:14 PM #21 CDR -1114 File Writer.cpp, Line 311 Reset occurred 10:25:14 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:25:14 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:25:14 PM #24 Text 0 File DVDR.cpp, Line 2765 EndDAO: Last written address was -1 10:25:17 PM #25 CDR -1033 File WriterStatus.cpp, Line 167 Drive not ready 10:25:17 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 10:25:17 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your firmware is also very outdated, current version is 2.FA and can be found here: http://forum.rpc1.org/dl_result.php?kaj=1&isces As suggested, those CMC's are 4th class media... And you burner doesn't like them.
Try the firmware update as LOCOENG stated, this should correct the semaphore error. I had this happen with an external and outdated fw, it is a communication error between the drive and the program.
thx all I will try updating the FMW & those CMCs have been flawless on my NEC int drive (writen at 4x).
Sorry but is there any exe files for the firmware? I never had any luck with zip. Im guessing its my ignorance.
I don't know of an exe file, you just dl the zip and click on it and the exe file will be there, just click on that and it should run. You can dl WinZip here if yo don't have it, but Windows should be able to unzip.. http://www.download.com/3000-2250-10003164.html
Did it & flashed new firmware, restarted, & still no luck with Nero. Could it be media? If so im a bit peeved that this same media will work in my older ugly drive & not my shiny new one. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM Nero Version: 6.6.0.8 (Nero Express) Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 2 TA 0 - 6.6.0.8 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <MAD DOG MD-16XDVD9 >Version: 2.FA - HA 2 TA 0 - 6.6.0.8 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHV2060AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 MAD DOG MD-16XDVD9 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1279MB (1309928kB) Free physical memory: 831MB (851708kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.2.2006 Burn DVD Image 12:02:49 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:02:49 PM #2 Text 0 File Writer.cpp, Line 122 Writer MAD DOG MD-16XDVD9 running 12:02:49 PM #3 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 12:02:49 PM #4 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2202741 (489:29.66, 4302MB) 12:02:49 PM #5 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 12:02:49 PM #6 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 12:02:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:02:49 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2202742 (2202742) = #2202742/489:29.67 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202742 blocks [MAD DOG MD-16XDVD9] -------------------------------------------------------------- 12:02:49 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4511215616, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202742 | lead-out | 1 | 0x41 | 0x00 12:02:50 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:02:50 PM #11 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 12:02:50 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:02:50 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:02:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:02:50 PM #15 Text 0 File DVDR.cpp, Line 2356 Recording mode: Sequential Recording Mode 12:02:50 PM #16 Text 0 File Mmc.cpp, Line 21206 Set BUFE: Buffer underrun protection -> ON 12:02:50 PM #17 Text 0 File DVDR.cpp, Line 2502 Start write address at LBA 0 DVD high compatibility mode: Yes 12:02:50 PM #18 Text 0 File Cdrdrv.cpp, Line 8442 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:02:53 PM #19 Text 0 File Cdrdrv.cpp, Line 1287 12:02:53.861 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later 12:02:57 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x052C0000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:02:57 PM #21 Text 0 File Cdrdrv.cpp, Line 1287 12:02:57.487 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later 12:02:58 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AC50600 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:02:58 PM #23 Text 0 File Mmc.cpp, Line 18838 Writer-Buffer for MAD DOG MD-16XDVD9\H2 T0 reduced to 32768Bytes 12:02:58 PM #24 SCSI -1114 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AC50600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 12:02:58 PM #25 CDR -1114 File Writer.cpp, Line 311 Reset occurred 12:02:58 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:02:58 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:02:59 PM #28 Text 0 File DVDR.cpp, Line 2765 EndDAO: Last written address was -1 12:02:59 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Glad it is working out for you, as I stated above I had that problem with an external also. I updated the fw and it would burn disks again, only some brands not all. I too finally replaced it with a Lite-on. Sometimes the chipset in externals do not always get along with some computers. Good luck and happy burning.
