Hi, I have had alot of problems writing to dvd+r/-r, only 1 out of 3 complete burn process any advise. Vince 1A23- 1A23- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITEON DVD-ROM LTD163 >Version: GH5E - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 0 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3520A D: CDRom3 LITEON DVD-ROM LTD163 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523568kB) Free physical memory: 186MB (190788kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.2.2006 UDF/ISO compilation 8:02:53 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:02:53 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:02:53 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:02:53 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:02:53 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:02:53 PM #6 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-3520A running 8:02:53 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:02:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:02:53 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:02:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286159 (508:02.09, 4465MB) 8:02:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:02:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-3520A, Media type: DVD+R 8:02:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:02:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [_NEC DVD_RW ND-3520A] -------------------------------------------------------------- 8:02:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286160 | lead-out | 1 | 0x41 | 0x00 8:02:54 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:02:54 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 8:02:54 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:02:54 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 8:02:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:02:54 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BDD0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 8:02:54 PM #22 SCSI -1065 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 8:02:54 PM #23 SCSI -1065 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 8:02:54 PM #24 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 8:03:36 PM #25 SCSI -1114 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 8:30:33 PM #26 SCSI -1114 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06CD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x1E 0xAC 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 8:30:33 PM #27 CDR -1114 File Writer.cpp, Line 311 Reset occurred 8:30:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:30:34 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:30:34 PM #30 SCSI -1065 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 8:30:34 PM #31 SCSI -1065 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 8:30:34 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 5:36:01 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Most of the errors recorded point to a media selection problem, to save time what brand of media are you using.
different types, sony dvd-r 1x-8x, sony dvd+r 1x-8x, verbatim digital movie dvd+r 1x-4x, tdk dvd+r 8x
Sony and Verbatim are both good media, however this is what the errors indicate, media. Your firmware probably needs updating but when I checked your burner details it came up with this as latest version Mon Dec 27, 2004 4:09 am NEC ND-3520A NEC ND-3520A - 3.04, 3.05, 3.06 / 1.F3 (Mad Dog OEM) / 3.40 (Freecom OEM) Beta region free (RPC-1) firmware is available here. Patched by The Dangerous Brothers. RPC-2 -------------------------------------------------------------------------------- Edited but I am reluctant to tell you to update. Suggest you go to NEC website and see what you can find for the NEC ND-3520A, your version is 1.04 Also while you're there do a check on NECs preferred media. Good luck.
@ vinny1657 Here: *************************************** Nero Version: 6.6.0.16 *************************************** Your version of nero is out of date, upgrade to 6.6.0.18 here http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe here: ********************************************************************* Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 0 - 6.6.0.16 ********************************************************************* Your burner's firmware is out of date, it should be version 3.06 according to the NEC website. Here's a link, just enter the model# in the search field, click ok then click on 3.06 to download it. Follow the instruction for installation. http://forum.rpc1.org/dl_search.php Here: ******************************************************************** DiskPeripheral : WDC WD1200BB-00CAA0 atapi Port 0 ID 0 DMA: Off ******************************************************************** Your western digital drive is set most likely for the slower PIO mode, you should enable DMA mode. Here's a guide. http://www.onthegosoft.com/dma_setting_nt.htm Here: ********************************************************************* 8:02:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286159 (508:02.09, 4465MB) ********************************************************************* Have shrink create smaller output file sizes of 4300mb to avoid burning too close to the outer edge of the disk. In shrink goto: edit--preferences, from the dropdown menu choose custom and enter a value of 4300. Here: ************************************************************* MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) ************************************************************** The recorder may not be liking the media your using, but the firmware update may fix this, if not try a better brand/different brand.
@johni123, Although his version of Nero is slightly behind I dont advise him to update as the latest offering from Nero is full of bugs. He is already using good quality media, Sony and Verbatim, and a check of his firmware did indicate its outdated but I didnt recommend update as his version 1.04 is NOT even listed that is why I suggested a visit to NEC site. As I said ALL the errors point to Media problem which should be fixed with firmware update, but I just want him to be sure of the CORRECT update. Cheers [bold]EDIT[/bold] I see you have directed him to 6.6.0.18 which is bug free
I did goto to the NEC website and the correct update indicated for his drive on the site is 3.06. The update could fix the burn fail, adding greater media compatibility. EDIT: Here's a direct link. http://support.necsam.com/Optical/ND3520A.asp
@johnl123, yep thats fine I also confirmed that. When recommending the update of firmware one has to certain that it's the correct one as you have done. I checked my source and his version wasn't even listed so I would say its WAY out of date, updating this I think should solve Media problems. Also thanks for the link to Nero 6.6.0.18, it will come in handy until all the bugs are sorted.
He should be ok once he gets that update. Hope the links provided will be of some help. Take care John.
Johnl123 and gwendolin thanks alot, i updated burner firmware, updated nero, and turned on dma, have backed up ten dvd's in a row without an error. Thanks Again, Vince
