Can't format transflash card in Samsung T809.

Discussion in 'Samsung discussion' started by Nephilim, Mar 18, 2006.

  1. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    13,161
    Likes Received:
    1
    Trophy Points:
    116
    I've a T809 that comes with a SanDisk32MB transflash card and I've run into an issue with it. The other day the card suddenly refused to take any data whilst I was trying to move some mp3's to the card via the SD adpter plugged into a USB media reader. I've tried to format the card through both the phone and windows and neither of them can do it - they both say the card can't be formatted.

    I've tried the SanDisk USB test tool but it keeps erroring out saying it can't locate a USB drive even though the card is plugged into the USB media reader.

    Any ideas folks? This one's got me stumped.
     
  2. rebootjim

    rebootjim Active member

    Joined:
    May 13, 2004
    Messages:
    2,630
    Likes Received:
    0
    Trophy Points:
    66
    Make sure you haven't flipped the tiny switch on the card over to "read only".
     
  3. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    13,161
    Likes Received:
    1
    Trophy Points:
    116
    Thanks Jim :)

    I'm aware of the switch on the SD adapter and I've taken that into account with no luck. Is there a switch somewhere on the itty bitty transflash card itself? I don't see one.

    Maybe it's just a bum card. The TransFlash id actually made by made by KingMax (it's the SD adapter that's made by SanDisk :p) and I'm not familiar with them. I'm looking into a 512MBG SanDisk since I know SanDisk to be quality.
     
    Last edited: Mar 20, 2006
  4. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    13,161
    Likes Received:
    1
    Trophy Points:
    116
    I finally got the thing to format so for the sake of those that may have the same problem here's what worked for me:

    - Leave the TransFlash card in the phone.

    - Set the USB function in the phone to Mass Storage:

    Menu > Settings > Phone Settings > USB Settings > set to Mass Storage.

    Once the phone is set to mass storage connect it to the PC via the USB cable and your PC should recognize the phone/memory card as removable storage. Once I had all this done I could double click the icon for the phone in My Computer and format the card through Windows (I used FAT32).

    I dunno if there's an easier way but at least I got the stupid card formatted.
     

Share This Page