I have been using Nero to burn DVDs. I'm using DVD Shrink 3.2 with AnyDVD 5.9.1.1 running. For some reason when I go to burn the DVD's now they burn about 1/4 of the way then error out. Here's a log from Nero from the burn. I can't figure out why Nero is no longer letting me burn DVD's. Any help out there?? PLEASE! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1031 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS548060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 D: CDRom1 LITE-ON LTR-48125W G: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 108MB (111128kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.3.2006 UDF/ISO compilation 2:54:09 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation started 2:54:09 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation completed (no file modified) 2:54:09 PM #3 Text 0 File Isodoc.cpp, Line 6410 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:54:10 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724 DVD-Video files sorted 2:54:10 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 2:54:10 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 2:54:10 PM #7 Text 0 File Writer.cpp, Line 113 Writer D: TOSHIBA DVD-ROM SD-R6112 running 2:54:10 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 2:54:10 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 2:54:10 PM #10 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 2:54:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 2:54:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 2:54:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 2:54:10 PM #14 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:54:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [D: TOSHIBA DVD-ROM SD-R6112] -------------------------------------------------------------- 2:54:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [D: TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 2:54:10 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:54:10 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 2:54:10 PM #19 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 2:54:10 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 2:54:10 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 2x (2,770 KB/s) 2:54:11 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:54:11 PM #23 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 2:54:11 PM #24 Text 0 File MMC.cpp, Line 21541 Set BUFE: Buffer underrun protection -> ON 2:54:11 PM #25 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 2:54:11 PM #26 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:14:50 PM #27 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 3:14:50 PM #28 Text 0 File Reader.cpp, Line 367 Exception value: -1 3:15:11 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:15:11 PM #30 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 794047 3:16:09 PM #31 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM File 'Drivers\isdsflpy.sys': Ver=1.07.0100.0 , size=8055 bytes, created 8/29/2000 5:05:00 PM File 'Drivers\isd200.sys': Ver=1.07.0100.0 , size=26930 bytes, created 8/29/2000 5:05:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 2:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
First of all, your Nero is old and is not clean, and I am sure that has something to do with burning errors: Remove those serial numbers at the top of your post. Then, I would completely uninstall Nero using the Cleaning Tools from Nero web site. Then instal a clean update(version 7.7.8.2 is available). Second, you are using very poor quality media, CMC Mag: Buy some good stuff(and that does not mean it has to be more expansive), like Verbatim, Sony or Maxel MIJ. Also, don't burn so close to the edge of the disc: 4465Mb is too much, don't go over 4350MB. There is also new firmware available for your burner: http://www.toshiba-europe.com/storage/products/Drivers/SDR6112_1x33.zip
@r8rfnatc You really should listen to cyprusrom and edit out that cluster of serial numbers you are giving to the world. I know some lowlife has stolen it by now, but you should go back and edit them out NOW, just in case luck has been on your side. Stolen serial numbers will cause YOUR version to show up as illegal next time you need to update nero and YOUR nero will not work anymore.
Ok I upgraded the drivers and bought new DVD's as suggested but it still stops burning the DVD's about 1/3 of the way through the burning process. I have always been able to burn with Nero 6 and V7 but this all of a sudden just stopped working. Any other programs good for burning DVD's? BTW ... I can still burn CD's with no problems.
OK I just attempted to burn a DATA DVD & it also worked. I just can't seem to burn regular movie DVD's. Any other advice?
I have tried Sony DVD's, Verbatim & Philips and none work when trying to burn a DVD. It errors ou about 1/3 of the way thru the burn. Here's the log for the last one I tried after upgrading to the newest version of Nero, upgrading drivers, and trying different media (this log is with Philips DVD's but have tried Sony & Verbatim's too.) When I burn a Data DVD or a CD Nero works fine with all three media types. Just not a DVD movie. Any suggestions would be greatly appreciated. I think I have tried everything you have suggested so far. I even uninstalled Nero, used the clean tools, etc. then re-installed the V7.0.8.2 Thanks soooo much for for help. New Log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <TOSHIBA DVD-ROM SD-R6112>Version: 1033 - HA 1 TA 1 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1033 - HA 1 TA 1 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS548060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 D: CDRom1 LITE-ON LTR-48125W G: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 510MB (523244kB) Free physical memory: 63MB (65504kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.3.2006 UDF/ISO compilation 4:16:37 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 4:16:37 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 4:16:37 PM #3 Text 0 File Isodoc.cpp, Line 6423 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:16:37 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 4:16:37 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 4:16:37 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 4:16:37 PM #7 Text 0 File Writer.cpp, Line 113 Writer D: TOSHIBA DVD-ROM SD-R6112 running 4:16:37 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:16:37 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:16:37 PM #10 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 4:16:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 4:16:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 4:16:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 4:16:37 PM #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:16:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [D: TOSHIBA DVD-ROM SD-R6112] -------------------------------------------------------------- 4:16:37 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 4:16:37 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:16:37 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:16:37 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 4:16:37 PM #20 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 4:16:37 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 4:16:37 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2x (2,770 KB/s) 4:16:37 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:16:37 PM #24 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 4:16:37 PM #25 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 4:16:37 PM #26 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:36:58 PM #27 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 4:36:58 PM #28 Text 0 File Reader.cpp, Line 367 Exception value: -1 4:37:33 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:37:33 PM #30 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 794047 4:38:31 PM #31 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM File 'Drivers\isdsflpy.sys': Ver=1.07.0100.0 , size=8055 bytes, created 8/29/2000 5:05:00 PM File 'Drivers\isd200.sys': Ver=1.07.0100.0 , size=26930 bytes, created 8/29/2000 5:05:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 9/23/2004 2:03:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
From the last log, it looks like you are still burning too close to the edge and with DVD High Compatibility on, on crap media. Follow all the instructions you were suggested.
To adjust the file size: Open DVD Shrink, click "Edit" and then go in Preferences: Select the "Target Size" to Custom, and enter 4350MB.
