Dreambox 500T 500C Fixes here

FRESH INSTALL IMAGES I PROMISED


Ok Guys. Heres images for both null modem and flash wizard.

This is a fresh image not a backup of my box.

I started from scratch so it is just a working image.

The images have autoroll and have scanning for every service provider.

Once installed it will ask you to do a scan. There is a list of diffrent scan i.e uk, ntl ireland etc

Make sure you scan your area.

Once you have done this. select a channel wait at least 1 minute if the channel does not start press the blue button and press ok on evocam 2.12. This will start the cam. And you will get your channels.

This is a fix for everyone and especially the irish boxes so that you dont have the double channel problem

Nullmodem Image:

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html


Flash Wizard Image:

http://rapidshare.com/files/110539401/dwemptyautoroll.fw2.html

I have flashed a box using both methods and can tell you now that they work.

Tested myself. So guys get Loading.

 

thanks mark

will wait and see wat comes thank you for your help and let me know if you need any thing have been on to the manfactures the boss in work got them for me and they said they will get back to me

 

Hi cgscott,
A friend ask me to try and sort out his D******x 500c, I,m not very familiar with these boxes.
I would like to do it via null cable and just want to check that the last image works with ch***s irl and is there any other info i need before i start.
If image dosn`t work with ch***s could you tell me one that does via null cable.
Thanks.

 

Ok first things first. You will need a program called dreamup. I will post it in this link for you.

http://www.dream-multimedia-tv.de/download/DreamUP.zip

Then download this image. The null modem one. Save this to desktop.

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html

You need to plug the null from the box to pc.

With the dreambox switched off start up dreamup program.

Then untick use network box. Then click connect. Startup the dreambox.

It will connect. The flash box will then open. Click this it will ask for image. The image you downloaded open that. Then it will flash the image to your box.

Get back to me once youve done this mate.

Hope this helps.

 

Hi cgscott,
got the image on the box everything simple so far,
got to go back to m8 house to connect the box won`t have any pc there
so is there any thing else to look out for or is it just connect and turn on.
Thanks for help sofar.

 

No just plug it in mate.

Check your private message before leaving mate. I'll send my mobile and talk you through it.

 

I got your pm maybe 2morrow before i connect,I`ll let u know how i get on.
Thanks lots.

 

FRESH INSTALL IMAGES I PROMISED



Ok Guys. Heres images for both null modem and flash wizard.

This is a fresh image not a backup of my box.

I started from scratch so it is just a working image.

The images have autoroll and have scanning for every service provider.

Once installed it will ask you to do a scan. There is a list of diffrent scan i.e uk, ntl ireland etc

Make sure you scan your area.

Once you have done this. select a channel wait at least 1 minute if the channel does not start press the blue button and press ok on evocam 2.12. This will start the cam. And you will get your channels.

This is a fix for everyone and especially the irish boxes so that you dont have the double channel problem

Nullmodem Image:

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html


Flash Wizard Image:

http://rapidshare.com/files/110539401/dwemptyautoroll.fw2.html

I have flashed a box using both methods and can tell you now that they work.

Tested myself. So guys get Loading.

 

Hi cgscott,

I have the same problem with my dreaxxx 500c
I tried dreamUp but it would not load onto the box for me
Where are my going Wrong ??

decki

 

Thanks for this cgscott. I am in Cork City on the Chorus cable. I loaded on your image using crossover cable/IP and copied the file to /tmp folder then perfromed a flash from the menu.

Everything came up as planned and did an Automatic Transponder scan using Chorus selection from the list. Found all channels and added them to the list for me.
Some channel did not work first time out until I followed your steps on the blue button/evocam 2.12 trick. After this I had them all working (inc SS1).

Am I correct in saying that I now no longer need to edit the Keylist.txt file with new codes going forward?

Again.... thanks for this, your a legend!

 

That is indeed correct. No more keyloading.

Enjoy mate.

Thanks for the reply.

Cheers

Chris

 

Hi cgscott,
Got to try it sooner than i thought, very simple set up and works a treat.Your Amazing great work!
As this is my m8 box and he hasn`t got a clue about it and i`m not very familiar with it, is there an easy way to organise channels favs etc?
Many THANKS again, top man!

 

Thanks to the folks at DW. How do you find the image Chris I see all ROMs are fixed. I have Andromeda but was thinking of DW 2 know quite a few guys there and they are haunting me to swap images.

 

I uploaded these this morning

Null modem image:

http://rapidshare.com/files/110539456/dwemptyautoroll.img.html

Flashwizard Image:

http://rapidshare.com/files/110539401/dwemptyautoroll.fw2.html

Depending on how your flashing mate.

Choose the one you want.

Follow the instructions further up the page.

Cheers

Chris

 

No Cg I think I have the gist of flashing most boxes by now I was asking did you like the DW image and where you aware that all ROMs where fixed?

 

Hi chris,
just for my own info will that image work on all d****boxs or just the 500c?
thanks

 

There is a way mate. Its called Channel bouquets you can organize through the remote. Have a little play around with the image mate. Dont go into any setup settings or you might need the image again.

Cheers

Chris

 

This is only dm500c

Not for any other box.

Cheers

Chris

 

Yes i like the image. And i was aware it was fixed but in order to help i got the image from scratch ftp to the box and upload the au file through the addons section on the image. This gave me a working image. Then i uploaded it for these guys so that they could have a working fresh image. Most of these guys didnt know how to ftp to theyre boxes mate.

I never came accross the DW 2.0 image fully working before mate that is why i done this.

I fixed mine by adding the needed nagra 7 etc. But i thought i would do this for the more newbie end of the cable world.

Cheers

Chris

Fantastic DW Image

 

Cheers Chris I done the same with TBC's ROM fix but both ROM 10 and 11 have also been added so will probably give it a whirl as I noted yesterdays early morning roll was ROM 10 although evocam worked with ROM 10 and 11 disabled.

ROM patch is just that and a new image is been debated to counteract future ECMs or future encryption upgrades by the CC.