Help With XBOX please

Hey, I have hardmodded XBOX and it is not working properly right now. If I am at the wrong forum please redirect me. Anyways, I have a chip that comes out of the box and you can see it in the front. It has three switches, Enable, Disable Bank 1, Bank 2 and Protect, Unprotect. When I boot up my xbox it either keeps trying to turn on and fails so it tries again and again, or if the switches are in a certain order it gives me error 05. Any help would be appreciated, and again if this is posted in the wrong forum just redirect me.

Thanks

 

Turn it to bank 2 and flash your chip

 

set the switch enable, bank1. then what do you see if you turn on xbox?
set the switch enable, bank2. then what do you see if you turn on xbox?

set the switch disable. then you will see the error because the hdd is not lock. This is not the problems.

 

yea ur chip should me able to lock it back up

 

ok, now when i do what you guys say, it tries to boot up, flashes green once, then fails, then tries again, flashes twice, then fails, then tries again, and it keeps flashing green then red. I tried both Bank 1 and 2 with enable and protect and unprotect.

 

hmm there are 2 cases:

- xbox can't find dashboard on hdd.
- bios is gone.

which logo do you see when the bios boots up with modchip on? it is between the big X and XBOX. LIke xecuter, microsoft.

After this, the light flash right?

 

Can you find out which setting give you error 5?
Which bios did you flash for the chip?

 

See I'm very bad with the whole modding thing, so I don't know how to flash a chip, and I don't know about Bios. And when it boots up, nothing happens it just stays blank (AV in top left and black screen)nothing having to do with the XBOX.

 

do you have autoinstaller disk? or any cd/dvd for xbox repair? Who mod your xbox?

 

a friend of mine who's really good with it, we still owe him money though so until i get it i can't have him fix it. and no i do not have any of those things.

 

lol. I guess it is time to pay him with interest too.

since you don't know anything and have no stuffs. I can't fix it for. Sorry.

 

i also just realized that when i move the switch to disable, that's the only time i get error 05

 

does that help?

 

ok. do you see the bios boots up the same (look at the logo between the big X and XBOX) when switch is disable and enable?

 

when disabled nothing comes up in between the X and the XBOX and when enabled nothing boots up at all, the open button just flashes.

 

there is 2 cases

- The modchip may move inside the xbox. your xbox must been dropped or moved hard. Do you have solderless or pinheader or wires soldering for modchip?

- Bios has been lost.

If the first case, then you can fix the xbox.

 

indeed my mom dropped it

how can i fix it.

 

YES. this caused the modchip move. open the xbox and lood which chip is that like x2.6 or x2.3.

 

ok it's open, where do i look.

 

do you see modchip?
any wires soldering?