I have a 1.2 and it took my system about a day for it to encoding a DVD and after all that time is still didn't rip it so what I want to know is for a 1.5 movie what wound be the basic time on encoding movie. I know there are a lot of variables in this in this. So if you would post your the move time you encodig, about how long it took to encode it with DVD-RB and the type of CPU your system. And that will give me a basic look on what kinda cpu my next system shouold be for it to rip a dvd with DVD-RB will look like for me. So just post your - movie time - time it took to encode - the CPU on your system.

I was told dvd-rb doesn't rip it 'encodes' so I've changed all rip words to encode

Yep i say the cool one... lol wrong forum.

If you're talking about how long it takes DVD-RB to do an encoding then don't talk about ripping. DVDDecrypter and DVDFab Decrypter rips dvds to the hard drive. RB encodes the DVD to the best quality picture you can get on a DVD-5. Anyway...... I gather you want encoding times with DVD-RB...... so here goes........

[12:37:07] One Click encoding activated...
-----------------
[12:37:07] Phase I, PREPARATION started.
- CCE 2.62+ encoder selected.
- "Movie Only" mode is enabled.
- VTS_01: 3,230,897 sectors.
-- Scanning and writing .D2V & .AVS files
-- Embedded null records found
-- Processed 155,010 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 73.2%
- Overall bitrate : 6,489/5,191Kbs
- Space for Video : 4,096,888KB
- HIGH/LOW/TYPICAL Bitrates: 8,552/393/5,191 Kbs
[12:44:11] Phase I, PREPARATION completed in 7 minutes.
[12:44:11] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Extracting STILLS for VTS_01 segment 22
[13:51:20] Phase II ENCODING completed in 67 minutes.
[13:51:20] Phase III, REBUILD started.
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 2 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 3 VOBID 5 CELLID 1
- Rebuilding seg 4 VOBID 5 CELLID 2
- Rebuilding seg 5 VOBID 5 CELLID 3
- Rebuilding seg 6 VOBID 5 CELLID 4
- Rebuilding seg 7 VOBID 5 CELLID 5
- Rebuilding seg 8 VOBID 5 CELLID 6
- Rebuilding seg 9 VOBID 5 CELLID 7
- Rebuilding seg 10 VOBID 5 CELLID 8
- Rebuilding seg 11 VOBID 5 CELLID 9
- Rebuilding seg 12 VOBID 5 CELLID 10
- Rebuilding seg 13 VOBID 5 CELLID 11
- Rebuilding seg 14 VOBID 5 CELLID 12
- Rebuilding seg 15 VOBID 5 CELLID 13
- Rebuilding seg 16 VOBID 5 CELLID 14
- Rebuilding seg 17 VOBID 5 CELLID 15
- Rebuilding seg 18 VOBID 5 CELLID 16
- Rebuilding seg 19 VOBID 5 CELLID 17
- Rebuilding seg 20 VOBID 5 CELLID 18
- Rebuilding seg 21 VOBID 5 CELLID 19
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 22 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
- Writing ISO image to DVD...
- ISO Image successfully written.
- Deleting ISO image.
[15:24:25] Phase III, REBUILD completed in 93 minutes.

Done.
[15:24:26] PREPARE/ENCODE/REBUILD completed in 167 mi

I dont' remember whether it was a movie or an episode DVD, I recently finished Doogie Howser, MD first season, NYPD Blue First sesaon and ER season one. so this log file is just one of the many I have.... here is another:

[16:53:11] Phase I, PREPARATION started.
- CCE 2.62+ encoder selected.
- "Movie Only" mode is enabled.
- VTS_05: 2,743,244 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 150,297 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 88.0%
- Overall bitrate : 6,697/5,358Kbs
- Space for Video : 4,099,992KB
- HIGH/LOW/TYPICAL Bitrates: 6,760/2,347/5,358 Kbs
[16:57:21] Phase I, PREPARATION completed in 4 minutes.
[16:57:21] Phase II ENCODING started
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_05 segment 2
- Creating M2V for VTS_05 segment 3
- Creating M2V for VTS_05 segment 4
- Creating M2V for VTS_05 segment 5
- Creating M2V for VTS_05 segment 6
- Creating M2V for VTS_05 segment 7
- Creating M2V for VTS_05 segment 8
- Creating M2V for VTS_05 segment 9
- Creating M2V for VTS_05 segment 10
- Creating M2V for VTS_05 segment 11
- Creating M2V for VTS_05 segment 12
- Creating M2V for VTS_05 segment 13
- Creating M2V for VTS_05 segment 14
- Creating M2V for VTS_05 segment 15
- Creating M2V for VTS_05 segment 16
- Creating M2V for VTS_05 segment 17
- Creating M2V for VTS_05 segment 18
- Creating M2V for VTS_05 segment 19
- Creating M2V for VTS_05 segment 20
- Creating M2V for VTS_05 segment 21
- Creating M2V for VTS_05 segment 22
- Creating M2V for VTS_05 segment 23
- Creating M2V for VTS_05 segment 24
- Creating M2V for VTS_05 segment 25
[17:59:16] Phase II ENCODING completed in 62 minutes.
[17:59:17] Phase III, REBUILD started.
- Processing VTS_05
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 9 VOBID 2 CELLID 1
- Rebuilding seg 10 VOBID 2 CELLID 2
- Rebuilding seg 11 VOBID 2 CELLID 3
- Rebuilding seg 12 VOBID 2 CELLID 4
- Rebuilding seg 13 VOBID 2 CELLID 5
- Rebuilding seg 14 VOBID 2 CELLID 6
- Rebuilding seg 15 VOBID 2 CELLID 7
- Rebuilding seg 16 VOBID 2 CELLID 8
- Rebuilding seg 17 VOBID 2 CELLID 9
- Rebuilding seg 18 VOBID 2 CELLID 10
- Rebuilding seg 19 VOBID 2 CELLID 11
- Rebuilding seg 20 VOBID 2 CELLID 12
- Rebuilding seg 21 VOBID 2 CELLID 13
- Rebuilding seg 22 VOBID 2 CELLID 14
- Rebuilding seg 23 VOBID 2 CELLID 15
- Rebuilding seg 24 VOBID 2 CELLID 16
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 25 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
- Writing ISO image to DVD...
- ISO Image successfully written.
- Deleting ISO image.
[18:22:42] Phase III, REBUILD completed in 23 minutes.

Done.
[18:22:43] PREPARE/ENCODE/REBUILD completed in 89 min.

this one must have been a movie.... sorry I don't know the name.....but these are typical DVD-RB times I get with my computer.... my specs are in my signature!

I have read where the AMD cpu's (especially dual cores) are tearing up the intel cpu's on encode times. Nontheless since encoding is very cpu intensive, the faster your cpu the faster your encode times will be. If you intend to continue using rb with CCE or hc I would definately consider a cpu upgrade.

here is a typical encode using CCE 2pass on my p.c.
(maybe a little on the high side)

[09:12:23] One Click encoding activated...
-----------------
[09:12:23] Phase I, PREPARATION started.
- CCE 2.70.2.1 encoder selected.
- VTS_01: 2,118,854 sectors.
-- Scanning and writing .D2V & .AVS files
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Overall bitrate : 5,103/4,083Kbs
- Space for Video : 3,853,868KB
- HIGH/LOW/TYPICAL Bitrates: 5,003/393/4,083 Kbs
[09:15:48] Phase I, PREPARATION completed in 3 minutes.
[09:15:48] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_05 segment 2
- Extracting STILLS for VTS_05 segment 3
[10:07:52] Phase II ENCODING completed in 52 minutes.
[10:07:52] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[10:23:21] Phase III, REBUILD completed in 16 minutes.

Done.
[10:23:21] PREPARE/ENCODE/REBUILD completed in 71 min.

L8ter ..... what movie was that?

no idea :-)just picked one out of the log.

try king kong ;)

you're telling me that a 3 hour movie you got a total time of 71 mins??? and I thought that mine was fast!

no no no I was actually asking what you would get a full back-up took me 93 min's building iso's.w/ CCE 2.70.01

although this is a movie I will redo w/ procoder2 as it is fairly low bitrate

As most of you know I very seldom do movie only. The original folder on this one was 7.21 GB. Took 139 min with my 2.8 ghz cpu (I don't have it oc'ed to 3.2 ghz right now and it's only 533 FSB w/o hyperthreading technology). I'm curious to see what the 3.4 ghz cpu w/ 800 FSB and ht will do it in when I get it installed.

[16:31:04] One Click encoding activated...
-----------------
[16:31:08] Phase I, PREPARATION started.
- CCE 2.70.2.1 encoder selected.
- VTS_01: 289,002 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 19,214 frames.
-- Building .AVS and .ECL files
- VTSM_10: 27,180 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 1,556 frames.
-- Building .AVS and .ECL files
- VTS_10: 3,288,988 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 161,954 frames.
-- Building .AVS and .ECL files
- VTS_12: 173,058 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 14,864 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.3%
- Overall bitrate : 5,004/4,003Kbs
- Space for Video : 4,026,962KB
- HIGH/LOW/TYPICAL Bitrates: 8,552/2,604/4,003 Kbs
[16:37:15] Phase I, PREPARATION completed in 6 minutes.
[16:37:15] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTSM_10 segment 0
- Creating M2V for VTSM_10 segment 1
- Creating M2V for VTSM_10 segment 2
- Creating M2V for VTSM_10 segment 3
- Creating M2V for VTSM_10 segment 4
- Extracting STILLS for VTSM_10 segment 5
- Extracting STILLS for VTSM_10 segment 6
- Extracting STILLS for VTSM_10 segment 7
- Extracting STILLS for VTSM_10 segment 8
- Extracting STILLS for VTSM_10 segment 9
- Extracting STILLS for VTSM_10 segment 10
- Extracting STILLS for VTSM_10 segment 11
- Extracting STILLS for VTSM_10 segment 12
- Extracting STILLS for VTSM_10 segment 13
- Extracting STILLS for VTSM_10 segment 14
- Extracting STILLS for VTSM_10 segment 15
- Extracting STILLS for VTSM_10 segment 16
- Creating M2V for VTS_10 segment 0
- Creating M2V for VTS_10 segment 1
- Creating M2V for VTS_10 segment 2
- Creating M2V for VTS_10 segment 3
- Creating M2V for VTS_10 segment 4
- Creating M2V for VTS_10 segment 5
- Creating M2V for VTS_10 segment 6
- Creating M2V for VTS_10 segment 7
- Creating M2V for VTS_10 segment 8
- Creating M2V for VTS_10 segment 9
- Creating M2V for VTS_10 segment 10
- Creating M2V for VTS_10 segment 11
- Creating M2V for VTS_10 segment 12
- Creating M2V for VTS_10 segment 13
- Creating M2V for VTS_10 segment 14
- Creating M2V for VTS_10 segment 15
- Creating M2V for VTS_10 segment 16
- Creating M2V for VTS_10 segment 17
- Creating M2V for VTS_10 segment 18
- Creating M2V for VTS_10 segment 19
- Creating M2V for VTS_10 segment 20
- Creating M2V for VTS_10 segment 21
- Creating M2V for VTS_10 segment 22
- Creating M2V for VTS_10 segment 23
- Creating M2V for VTS_10 segment 24
- Creating M2V for VTS_10 segment 25
- Creating M2V for VTS_10 segment 26
- Creating M2V for VTS_10 segment 27
- Creating M2V for VTS_10 segment 28
- Creating M2V for VTS_10 segment 29
- Creating M2V for VTS_12 segment 0
- Creating M2V for VTS_12 segment 1
[18:40:06] Phase II ENCODING completed in 123 minutes.
[18:40:07] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 3 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 4 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 5 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 6 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_10
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Rebuilding seg 2 VOBID 2 CELLID 2
- Rebuilding seg 3 VOBID 2 CELLID 3
- Rebuilding seg 4 VOBID 2 CELLID 4
- Rebuilding seg 5 VOBID 2 CELLID 5
- Rebuilding seg 6 VOBID 2 CELLID 6
- Rebuilding seg 7 VOBID 2 CELLID 7
- Rebuilding seg 8 VOBID 2 CELLID 8
- Rebuilding seg 9 VOBID 2 CELLID 9
- Rebuilding seg 10 VOBID 2 CELLID 10
- Rebuilding seg 11 VOBID 2 CELLID 11
- Rebuilding seg 12 VOBID 2 CELLID 12
- Rebuilding seg 13 VOBID 2 CELLID 13
- Rebuilding seg 14 VOBID 2 CELLID 14
- Rebuilding seg 15 VOBID 2 CELLID 15
- Rebuilding seg 16 VOBID 2 CELLID 16
- Rebuilding seg 17 VOBID 2 CELLID 17
- Rebuilding seg 18 VOBID 2 CELLID 18
- Rebuilding seg 19 VOBID 2 CELLID 19
- Rebuilding seg 20 VOBID 2 CELLID 20
- Rebuilding seg 21 VOBID 2 CELLID 21
- Rebuilding seg 22 VOBID 2 CELLID 22
- Rebuilding seg 23 VOBID 2 CELLID 23
- Rebuilding seg 24 VOBID 2 CELLID 24
- Rebuilding seg 25 VOBID 2 CELLID 25
- Rebuilding seg 26 VOBID 2 CELLID 26
- Rebuilding seg 27 VOBID 2 CELLID 27
- Rebuilding seg 28 VOBID 2 CELLID 28
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 29 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_10_0.IFO
- Updating TMAP table...
- Processing VTS_12
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_12_0.IFO
- Updating TMAP table...
- Processing VTSM_10
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Rebuilding seg 3 VOBID 3 CELLID 2
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 4 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 5 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 6 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 7 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 8 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 9 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Rebuilding seg 10 VOBID 10 CELLID 1
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 11 VOBID 11 CELLID 1
- Updating NAVPACKS for VOBID_11
- Rebuilding seg 12 VOBID 12 CELLID 1
- Updating NAVPACKS for VOBID_12
- Rebuilding seg 13 VOBID 13 CELLID 1
- Updating NAVPACKS for VOBID_13
- Rebuilding seg 14 VOBID 14 CELLID 1
- Updating NAVPACKS for VOBID_14
- Rebuilding seg 15 VOBID 15 CELLID 1
- Updating NAVPACKS for VOBID_15
- Rebuilding seg 16 VOBID 16 CELLID 1
- Updating NAVPACKS for VOBID_16
- Updated VTSM_C_ADT.
- Updated VTSM_VOBU_ADMAP.
- Updated IFO: VTS_10_0.IFO
- Correcting VTS Sectors...
[18:50:19] Phase III, REBUILD completed in 10 minutes.

Done.
[18:50:19] PREPARE/ENCODE/REBUILD completed in 139 min.
- Detected ANGLE and/or INTERLEAVING on source.

how come kingkong was 7.88 gbs for me?

btw I'm w/ you mort I never do movie only the most I will steal from extra's on a final copy is 10 percent :-)

I guess I'm a meat and potato guy! I like my DVDs to start right up with the movie..... no extras! Get to the good part, FAST!!!!!!

I only ever do main movie unless its a compilation disk such as a comedy series.
I've got King Kong as 7.13 GB I've just started to re-do it, this time the whole film and extras, will post the speed of the process using procoder 2 at best quality settings.
The main reason I ended up with a dual core was because before hand, using DVD RB meant the PC was useless whilst working through a film, now I can carry on as normal, except for the procoder messages keep popping up.

I'm doing DUNE (7.79GB) right now....... will post the log soon!

DUNE:

[14:40:32] One Click encoding activated...
-----------------
[14:40:32] Phase I, PREPARATION started.
- CCE 2.62+ encoder selected.
- "Movie Only" mode is enabled.
- VTS_01: 4,027,521 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 254,652 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 51.9%
- Overall Bitrate : 3,703/2,962Kbs
- Space for Video : 3,840,392KB
- HIGH/LOW/TYPICAL Bitrates: 3,205/393/2,962 Kbs
[14:49:37] Phase I, PREPARATION completed in 9 minutes.
[14:49:37] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Extracting STILLS for VTS_01 segment 19
[16:18:00] Phase II ENCODING completed in 89 minutes.
[16:18:00] Phase III, REBUILD started.
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 19 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
- Writing ISO image to DVD...
- ISO Image successfully written.
- Deleting ISO image.
- ISO Image could not be deleted.
[16:45:20] Phase III, REBUILD completed in 27 minutes.

Done.
[16:45:20] PREPARE/ENCODE/REBUILD completed in 125 min.

not bad for a 2hr 57min movie!

Quote:

---

I've got King Kong as 7.13 GB

---

hmmm??

Quote:

---

this time the whole film and extras, will post the speed of the process using procoder 2 at best quality settings.

---

that's my next step so I'll join you I believe you may edge me out though. do you run multiple instances?

Well thanks alot guys...I was starting to feel comfortable with my current computer, but now I want to get a dual core AMD... lol (I can't wait until the Toledo cores start to come down in price). Here are my results:

King Kong (Full movie)
7.88 GB
CCE SP at 2 passes
System specs below

note: now I feel really slow :(

[11:38:55] One Click encoding activated...
-----------------
[11:38:55] Phase I, PREPARATION started.
- CCE 2.70.2.4 encoder selected.
- VTS_01: 4,002,615 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 269,611 frames.
-- Building .AVS and .ECL files
- VTS_02: 56,622 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 5,758 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 49.0%
- Overall Bitrate : 3,248/2,599Kbs
- Space for Video : 3,643,352KB
- HIGH/LOW/TYPICAL Bitrates: 3,099/400/2,599 Kbs
[11:42:51] Phase I, PREPARATION completed in 4 minutes.
[11:42:51] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
-- V01004300001044 no .M2V, retrying.
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Extracting STILLS for VTS_01 segment 51
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Extracting STILLS for VTS_02 segment 2
[13:38:32] Phase II ENCODING completed in 116 minutes.
[13:38:32] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Rebuilding seg 30 VOBID 1 CELLID 31
- Rebuilding seg 31 VOBID 1 CELLID 32
- Rebuilding seg 32 VOBID 1 CELLID 33
- Rebuilding seg 33 VOBID 1 CELLID 34
- Rebuilding seg 34 VOBID 1 CELLID 35
- Rebuilding seg 35 VOBID 1 CELLID 36
- Rebuilding seg 36 VOBID 1 CELLID 37
- Rebuilding seg 37 VOBID 1 CELLID 38
- Rebuilding seg 38 VOBID 1 CELLID 39
- Rebuilding seg 39 VOBID 1 CELLID 40
- Rebuilding seg 40 VOBID 1 CELLID 41
- Rebuilding seg 41 VOBID 1 CELLID 42
- Rebuilding seg 42 VOBID 1 CELLID 43
- Rebuilding seg 43 VOBID 1 CELLID 44
- Rebuilding seg 44 VOBID 1 CELLID 45
- Rebuilding seg 45 VOBID 1 CELLID 46
- Rebuilding seg 46 VOBID 1 CELLID 47
- Rebuilding seg 47 VOBID 1 CELLID 48
- Rebuilding seg 48 VOBID 1 CELLID 49
- Rebuilding seg 49 VOBID 1 CELLID 50
- Rebuilding seg 50 VOBID 1 CELLID 51
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 51 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[13:55:57] Phase III, REBUILD completed in 17 minutes.

Done.
[13:55:57] PREPARE/ENCODE/REBUILD completed in 137 min.

edit: Do you have to have a dual core processor or hyperthreading in order to run multiple encoder instances, or can a normal single core processor like mine use this option??

ebega it could take you a day :-)that's actually a pretty respectable time.
here is the promised log from pro2

[18:38:18] Phase I, PREPARATION started.
- "Steal Space from Extras" mode (10%) is enabled.
- VTS_01: 4,002,615 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 269,611 frames.
-- Building .AVS and .ECL files
- VTS_02: 56,622 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 5,758 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 49.1%
- Overall bitrate : 3,253/2,602Kbs
- Space for Video : 3,648,542KB
- Movie improvement from extra reduction = .1%
- HIGH/LOW/TYPICAL Bitrates: 3,108/400/2,602 Kbs
[18:42:42] Phase I, PREPARATION completed in 4 minutes.
[18:42:42] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1

~~~~~~blah blah blah~~~~~~~~

- Extracting STILLS for VTS_01 segment 51
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Extracting STILLS for VTS_02 segment 2
[20:29:40] Phase II ENCODING completed in 107 minutes.
[20:29:40] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2

~~~~~blah's again~~~~~~~

- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[20:44:05] Phase III, REBUILD completed in 15 minutes.

Done.
[20:44:05] PREPARE/ENCODE/REBUILD completed in 126 min.

procoder 2.04 dual instances full movie 10% on extra's

@L8ter........ what do you mean by multiple instances?

This is the results for the King Kong film UK version.(using pro 2)
I also use the build ISO option so I can burn it with Decrypter.
I don't have both cores working on the film processing, but I do have other apps running in the background.
Zone Alarm, AVG, PeerGuardian, RivaTuner, Skype, Asus Probe, Snagit, Printer monitor, winwasher, and a few other bits and bobs, so it wasn't set to run a peak performance.

[20:58:48] One Click encoding activated...
-----------------
[20:58:48] Phase I, PREPARATION started.
- VTS_01: 3,573,544 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 269,441 frames.
-- Building .AVS and .ECL files
- VTS_02: 56,448 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,796 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 55.2%
- Overall Bitrate : 2,754Kbs
- Space for Video : 3,687,500KB
- HIGH/LOW/TYPICAL Bitrates: 3,363/410/2,754 Kbs
[21:01:07] Phase I, PREPARATION completed in 3 minutes.
[21:01:07] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Creating M2V for VTS_01 segment 36
- Creating M2V for VTS_01 segment 37
- Creating M2V for VTS_01 segment 38
- Creating M2V for VTS_01 segment 39
- Creating M2V for VTS_01 segment 40
- Creating M2V for VTS_01 segment 41
- Creating M2V for VTS_01 segment 42
- Creating M2V for VTS_01 segment 43
- Creating M2V for VTS_01 segment 44
- Creating M2V for VTS_01 segment 45
- Creating M2V for VTS_01 segment 46
- Creating M2V for VTS_01 segment 47
- Creating M2V for VTS_01 segment 48
- Creating M2V for VTS_01 segment 49
- Creating M2V for VTS_01 segment 50
- Extracting STILLS for VTS_01 segment 51
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Extracting STILLS for VTS_02 segment 2
[23:00:13] Phase II ENCODING completed in 119 minutes.
[23:00:13] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Rebuilding seg 30 VOBID 1 CELLID 31
- Rebuilding seg 31 VOBID 1 CELLID 32
- Rebuilding seg 32 VOBID 1 CELLID 33
- Rebuilding seg 33 VOBID 1 CELLID 34
- Rebuilding seg 34 VOBID 1 CELLID 35
- Rebuilding seg 35 VOBID 1 CELLID 36
- Rebuilding seg 36 VOBID 1 CELLID 37
- Rebuilding seg 37 VOBID 1 CELLID 38
- Rebuilding seg 38 VOBID 1 CELLID 39
- Rebuilding seg 39 VOBID 1 CELLID 40
- Rebuilding seg 40 VOBID 1 CELLID 41
- Rebuilding seg 41 VOBID 1 CELLID 42
- Rebuilding seg 42 VOBID 1 CELLID 43
- Rebuilding seg 43 VOBID 1 CELLID 44
- Rebuilding seg 44 VOBID 1 CELLID 45
- Rebuilding seg 45 VOBID 1 CELLID 46
- Rebuilding seg 46 VOBID 1 CELLID 47
- Rebuilding seg 47 VOBID 1 CELLID 48
- Rebuilding seg 48 VOBID 1 CELLID 49
- Rebuilding seg 49 VOBID 1 CELLID 50
- Rebuilding seg 50 VOBID 1 CELLID 51
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 51 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
[23:06:07] Phase III, REBUILD completed in 6 minutes.

Done.
[23:06:07] PREPARE/ENCODE/REBUILD completed in 128 min.

i dont use DVD-RB because of time restrains BUT i do use CloneDVD 2 with AnyDVD and my times are 10 to 12 mintues for shorter movies and 20 to 25 mintues for longer movies ,thats everything transcoding and burning the dvd .i have a decent system per my sig.

@aabbcc........ you are using a transcoder........ DVD-RB is an encoder that takes the video and re does everything to keep the quality HIGH and is much better than a transcoder..... so it takes longer.... but the results are better. I use AnyDVD/CloneDVD2, also, but it's for 100% quality (no compression)! Your times are what's expected from a fast transcoder---- and AnyDVd/CloneDVD2 are one of the best!

@IHOE

Quote:

---

@L8ter........ what do you mean by multiple instances?

---

I have two instances of procoder doing my handy work. this is something you cannot do w/ cce as cinema craft won't let two instances run simultaniously even if they are different installs in seperate directories. there has been several request when jdobbs first added the feature for dualcore/ht systems, but no responses from cinemacraft.

check under settings you will find the option for multiple encoder processes. works w/ pro2,hc, and I believe quenc/autoq one of the two??
@ BigDK

Quote:

---

I don't have both cores working on the film processing, but I do have other apps running in the background.
Zone Alarm, AVG, PeerGuardian, RivaTuner, Skype, Asus Probe, Snagit, Printer monitor, winwasher, and a few other bits and bobs, so it wasn't set to run a peak performance.

---

I also tend to leave avg monitoring,as well as pcwizard 2006 minimized so I can see the temps and processor usage, and a couple of other silly things in my tray :-)

one thing that struck me odd your(amd) chipset/cpu let's you dynamically allocate your processing to one core??

I can disable a core, or not use dual instances but that just spreads the lessened load evenly across both cores.

@ aabbccdd, patience is of virtue, especially since I haven't noticed a trend in tv's getting smaller or display quality going down.
to me it's worth the time invested + the options available outway my need for speed :)

I hadn't noticed the multiple encoder option so it wasn't checked.
Also hadn't seen the encode menus option either, so thats now checked as well.
Will run it through again to see if it is any quicker with the multiple encoder option checked.

you should see about 30% decrease in "encode" time.

I thought it was on by default may be it's just do to replacing beta version's w/ newreleases

I don't use the encode menues option (it will take more time)although testing it I didn't have any problems, I have read numerous threads here and there.