Hi I have an Epson r340 which i use to print on cd/dvds. The problem i have is i cant get the alignment just quite right.i know there is a print adjustment option in the printer software..it goes up/down/left/right in 0.1mm increments.....but whatever i try i get a slight white mark (the disk printable surface) showing.I notice that he tray where the disk sits there is a bit of free play and i know theres an arrow on each side to line up (even though the ones on the printer arent white like on the tray!)Anyone got any ideas? I set the outer diam. at 119mm which is the diam. of the printable surface. John
2 things to check make sure the arrows are perfectly lined up and that the tray isn't hitting the wall on the pass through.Wheres the white mark located? Chris
Hi, not all cds and dvds have set diameters. Try measuring the inside diameter(hole) and outside diameter. Setup using those measurements. If you still get a line on the outside, up the daimeter by a few millimeters,
