Ok I have been using DVD Shrink on my laptop trying to burn dvd's with a sony external burner model DRX-820U but after encoding using DVD Shrink the computer freezes and won't burn...I'm using Nero 6.6.0.19....its at the end of encoding just before burning...it freezes at Burning to Cache...the computer freezes and the drive won't open unless it is turned off and then turned back on....I know my drive works because my daughter uses DVD Shrink with Nero 6.6.0.14 on her computer and my drive and it works but it won't work on my computer with my version of Nero....any ideas how to fix this...please help...I've been trying to fix this for some time now.
It could be a burner firmware issue, go here to this link to check if your firmware is current. http://forum.rpc1.org/dl_firmware.php?download_id=1255
Hi lsmwif Check your version of Nero on you laptop. There is no version 6.6.0.19. Do you mean maybe 6.6.0.18? Shrink is very cpu intensive and laptops don't have the greatest fans. May be a heat issue. No multitasking and shut down any unnessecary processes. Have you ever been able to use shrink on your laptop w/ this burner successfully? Oh and it's best to keep your posts to one thread - makes things less confusing
My bad looks like there is a version 6.6.0.19b that came with some BenQ drives. (txs CF!!) So in that case uninstall this version - run the clean tool and install version 6.6.0.18 and see if that does the trick. Here's some links for you: http://ww2.nero.com/nero6/enu/General_CleanTool.html Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 (Recode & Vision: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
so i downloads pack 1 sucessfully.... i think, but i dont have a serial number for it. any suggestions?
binkie7 are you haning a bad day, an error, my god the women of many mens dreams...........wrong.Thats shattered my image of you .......whats darth going to say.............lol Bigger fan properly wont help much with the heat generated but maybe an external burner at a slow speed when attempting to burn
You could actually remove your case cover and point a room fan directly at your enclosure if it is a heat issue.
Also, if it is a heat issue you can try one of the pads that have the fan in it and put it under you laptop, I use this with my laptop as it has an overheating issue when I try to use Shrink/Nero.
Laptop.....duh. Forget my suggestion then...stupid me didn't read the post carefully enough. I apologize for my sorryness!
@LOCOENG Blonde moment? :0) See mine above :0) @guyrus Sorry to shatter the image - twas not intentionally
@ binkie7 : i wouldnt of said a blonde moment karen...........lol well maybe with loco then after seeing his reply: have you tried this...................lol
You don't need to rub it in...LOL EDIT: And Bubba you know I'm not a blonde...did you see whose come out of the closet?
yes we do, its not often we get you to slip up, and sent you a pm...... ???????? You know if you suggesting the fan and taking the case off , i thought you would of directed him to put it in the freezer as well..........lol
After nero has been loaded and it appears ,click on the word "NERO" that is in large lettering at top , as that's where you access the update function if nero is not set to autoupdate,failing that you can manually search the home site for your latest update for the software you have installed NERO OEM 6.6.1.4 NERO DIGITAL 3.1.0.25 NERO MEDIAPLAYER 1.4.0.35 InCD 4.3.23.2 EDIT: There is no need to delete the earlier version just install over
Hi scorpNZ Since this poster wants to autoburn w/ Shrink they'll need to use version 6.6.0.18. This is the last version of 6 to keep that functionality w/ Shrink. If trying w/ version 6.6.1.4 you'll receive a TRF error. Or they can just make it a 2 step process - rip to hard drive then open Nero and burn from there. Shrink can also autoburn w/ dvd decrypter and I think it's CopyToDVD.
Ok still having problems. This has nothing to do with heat or fans. Ok the equipment we have below is: My daughter has: Toshiba laptop, Sony burner, and Nero 6.6.0.14, DVD Shrink I have: Toshiba laptop(same model as daughter), Sony burner(different model), and Nero 6.6.0.19 and DVD Shrink We have same laptops, same burners (just different models), same DVD Shrink, and Nero. Daughters burner is 6 months old Sony model DRX-810UL and my Sony model DRX-820U is brand new. The problem is that when trying with my laptop, my burner, shrink, and Nero 6.6.0.19 dvd's won't burn. They encode then freeze just before burning. Only way to get burner to respond is to turn off then turn back on. The following is the error message received: 1A22-6206-0532-2400-5575-6164* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM Nero API version: 6.6.0.19 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 19b Recorder: <SONY DVD RW DRU-820A> Version: 2.0c - HA 2 TA 0 - 6.6.0.19 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : IC25N030ATCS04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2102 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2102 D: CDRom0 SONY DVD RW DRU-820A E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261488kB) Free physical memory: 138MB (141888kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.5.2006 NeroAPI 6:41:31 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 6:41:32 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 6:41:32 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 6:41:33 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 6:41:33 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:41:33 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:41:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:41:33 PM #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:41:34 PM #9 Text 0 File DlgWaitCD.cpp, Line 272 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2143439 (476:19.14, 4186MB) 6:41:34 PM #10 Text 0 File DlgWaitCD.cpp, Line 284 Write in overburning mode: NO 6:41:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 2494 Recorder: SONY DVD RW DRU-820A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 6:41:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 450 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:41:34 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2143440 (2143440) = #2143440/476:19.15 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143440 blocks [SONY DVD RW DRU-820A] -------------------------------------------------------------- 6:41:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD RW DRU-820A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389765120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2143440 | lead-out | 1 | 0x41 | 0x00 6:41:35 PM #15 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 6:41:35 PM #16 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:41:35 PM #17 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 6:41:35 PM #18 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 6:41:35 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012B114 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x32 0x01 0xC4 0x08 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x 6:41:35 PM #20 CDR -500 File ThreadedTransferInterface.cpp, Line 1612 SCSI command aborted SONY DVD RW DRU-820A\H2 T0 6:42:02 PM #21 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) 6:42:02 PM #22 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 6:42:02 PM #23 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. 6:42:02 PM #24 SCSI -500 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:42:05 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:42:07 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 6:42:07 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07B96C00 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.35a, size=16288 bytes, created 3/27/2002 11:22:22 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) We have decreased the burn speed as our laptop will only burn at 8X the speed...we have even decreased the speed down to 4X to see if that would work. We have also uninstalled Nero 6.6.0.19 and used Nero Clean Tool and then installed 6.6.0.18. We have also took the burner back and got another one. Now we know the burner works because when my daughter and I switch burners, her burner will work with my laptop and my Nero 6.6.0.19 and my burner will work on her laptop with her Nero 6.6.0.14. So does anyone have any suggestions why I can't use my burner on my laptop with my Nero 6.6.0.19 but I can use my burner on my daughters laptop with her Nero 6.6.0.14 and my daughter can use her burner on my laptop with Nero 6.6.0.19? They are the same laptops, the same DVD shrink, only difference is different Sony model #'s and different Nero versions. Please help before I have to take my burner back.
