I have been using DVDShrink3.2 and Nero 6.3 to copy my dvds now all of sudden, DVDShrink still reads the files ok but when it tranfers over to nero to burn them, nero always spits my blank disks out and says an error has occurred and has failed to burn. I have not changed anything, have even bought the same disks that I have already burnt about 30 dvds onto but now i can get nero to burn. have uninstalled and re-installed both DVDShrink and Nero but no luck. attaching a log from nero - Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 12:23:24 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 2, 0, 3 Recorder: <ATAPI DVD RW 16XMax> Version: 2.10 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : HDS728080PLAT20 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD RW 16XMax atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD RW 16XMax D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte BUFE : 0 Physical memory : 447MB (458220kB) Free physical memory: 18MB (18880kB) Memory in use : 95 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2006 NeroAPI 8:10:07 AM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 8:10:07 AM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 8:10:07 AM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 8:10:08 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 8:10:08 AM #5 Text 0 File Reader.cpp, Line 124 Reader running 8:10:08 AM #6 Text 0 File Writer.cpp, Line 113 Writer D: ATAPI DVD RW 16XMax running 8:10:08 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 8:10:08 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 8:10:08 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 8:10:08 AM #10 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 8:13:17 AM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286143 (508:01.68, 4465MB) 8:13:17 AM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO 8:13:17 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: ATAPI DVD RW 16XMax, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 8:13:17 AM #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD R DL.) 8:13:17 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [D: ATAPI DVD RW 16XMax] -------------------------------------------------------------- 8:13:17 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: ATAPI DVD RW 16XMax] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286144 | lead-out | 1 | 0x41 | 0x00 8:13:17 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:13:17 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:13:17 AM #19 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 8:13:17 AM #20 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 8:13:17 AM #21 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 8:13:17 AM #22 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 8:13:17 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:13:17 AM #24 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 8:13:17 AM #25 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 8:13:17 AM #26 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:14:12 AM #27 SPTI -1119 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x04 CDB Data: 0x2A 00 00 00 00 60 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09 04 Buffer x00cd0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8:14:12 AM #28 CDR -1119 File Writer.cpp, Line 302 Track following error D: ATAPI DVD RW 16XMax 8:14:12 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:14:15 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:14:15 AM #31 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 95 8:14:16 AM #32 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 8x (11,080 KB/s) 8:14:16 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 8:14:16 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 1:02:46 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
Quote: Nero API version: 7.2.0.3 This latest version of Nero is full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here http://www.filehippo.com click on Nero 7.2.0.3 and then select 7.0.8.2 for a bug free version These discs are crap, try some verbatim or Sony (made in japan) slow to 4X
@Gwen..... what does [bold]KEY_HARDWARE_ERROR[/bold] mean? looked up in other forums and most say it's the drive going bad. what do you think?
Nero 7.2.0.3 is throwing up all kind of errors, usually if the process I outlined is followed these errors seem to disappear. I will look that error up and get back to you. I know it appears in quite a few logs that I look at, I ignore it because normally updating, Nero or firmware seems to eliminate it...thats only my experience. Cheers.
well....... in other forums this error comes up for people that tried to update their firmware..... at least that's what I seen in a few forums and just assumed this! I can't believe that sooooooooo many errors are happening with a full new version of Nero (7.2.03b or what ever!) I hardly use it anymore! I even got an error on a copy of a copy! I wanted to copy an RW disk to a +R taiyo yuden disk and Nero got caught up! I used Blindwrite and it worked flawlessly! My evaluation of this version of Nero..... [bold]it sucks![/bold]
My opinion of it is much worse than that, nearly every log file posted concerns 7.2.0.3...a new one is Buffer overflow...but there's far too many so I recommend this, all I do now is paste this, saves me typing in every log. Quote: Nero API version: 7.2.0.3 This latest version of Nero is full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here http://www.filehippo.com click on Nero 7.2.0.3 and then select 7.0.8.2 for a bug free version
hey borisbear what are your pc stats? under resourced pc's seem to be the go these days or over use while trying to burn. can you do a ctrl+alt+del for me and then look at the next screen that pops open and in the left bottom corner tell us how many processors are running. Currently you have squat memory to do anything, so i'm not surprised that you have issues burning.If you want to keep doing this you will eventually have a burner that wont work or a pc due to the strain you are putting on them.It takes memory to keep evrything going at optimun capacity but if you have other programns running then your pc has to allocate an even amount of memory to keep the processors functioning. A temporay might be to increase your ram to 1024 and get a better processor guy
I got the task manager up and it tells me 41 processes are running. is this too many? i'm not up with all the tecnical stuff. please help
sorry, have been out of town, so just read your thread 10 mins ago.thanks for the feedback, have just cleaned out nero and am going to hippo site now, as i have been away, havent got any better quality disks but will try once i have the alt version of nero. bare with me, i'm only up with the basics, really appreciate the help.
Go directly to this site for 7.0.8.2 http://www.filehippo.com/download_nero_7_premium/?845 it will take you straight there, Cheers.
i tried to hijack this thread so my loooonnnng post just got edited out & replaced with this. edited by ddp
How the hell was that a long post. I compared it to the first person's post and it was the same length. Please explain. Next time be a little more clear. I am new to this forum you know. Wow. Oh no the saftey valve wolf. AHHHHHHH.
viazn04, hijack a thread again & i'll ban you or send you to the safety valve wolves, your choice!! start a new thread about your problem.
