The following motherboards are either capable or not capable with the new 2.60/2.50 downgrader and MPH downgrader 2.0 to 1.50.

CAPABLE:

1CB001
1C6001
1C9001
No Code
1C1003 a.k.a TA-082
Yeah,that's true,you can downgrade your TA-082 PSP.
--------------------------------------------------------------------
What Firmware PSP am I buying?

American Box:



Australian Box:



Asian Box:




Codes:

No letter = 1.0 (Japanese Release) 1.5 (North-American release) confirmed
A = 1.5 confirmed
B = 1.51 confirmed
C = 1.52 confirmed
D = 1.52 confirmed
E = 1.52 confirmed
F = 2.0 confirmed
G = 2.01 confirmed
H = 2.50 confirmed
I = 2.60 confirmed
J = 2.70 Probably
K = 2.71 confirmed
L = 2.81,here's the picture:




Does my GTA work with the new 2.60/2.50 to 1.50 downgrader?




The following are for the EU/UK versions of the game:

GTA: LCS (Non-Patched 2.6 version):
ULES-00151#

GTA: LCS (Patched 2.6 Version):
ULES-00151#2

For the U.S version of the game:

GTA:LCS (Non-Patched Version):
ULUS 10041

If you buy a used one here's the patched version:





These differ from country to country.

this should be stickied, since it's been asked so much lately, and will probably continue to be asked.

How do i do that?only the mods could do that dont they?
Should i pm them asking do do?

though this is just info discussed before, i agrree with smurrf, really good thread, its amazin
but it shouldnt be stickied, not that its not good enough its just none of the N00bs ever read the stickies and its not funny anymore

GREAT THREAD!!!

You might wanna edit the title too. You have motherboard spelled motherboarb. Just a friendly suggestion, not trying to offend you :)

Ok thanks,i'll edit it.

i just got to make sure the mobo is not a TA-082 and i can do downgrading? v2.5/.6 by factory is not impt?

Yeah,

it "shouldn't" be.

But make sure you follow carefully the downgrade steps,or else you will get a bricked psp.

i got the dev 44 off psphacks but can't open the file it a .rar file...what will I need?

You need winrar:

http://www.rarlab.com

then i should be able to open and install it to my mem stix and run it?

Yes you will,if you put the right folders at the right places.Or else,download the final package from here:

http://www.psp-hacks.com/file/648

thanx...

Quote:

---

CAPABLE:

1CB001
1C6001
1C9001
No Code

NOT CAPABLE:

1C1003 a.k.a TA-082

---

actually this no problem anymore :
http://www.psp-hacks.com/2006/07/27/ta-082-breakthrough/

Its a work in progress,nothing confirmed yet.

sorry josh, but like legend said, it's only a work in progress, he says that it will be supported on the next version, there is no confirmation yet, and since it's a possibility not a confirmation, don't upgrade your 2.6 psp's if u have the TA-082, just sit and wait for something to come around. so the TA-082 is still an issue at this point.

yup i know but it was published in many sites, and i believe its coming up

the motherboard number is copper right?

so what version is my motherboard? it doesnt have any markings at all. and i know my fireware is 2.6 because i looked in the psp os. also when i bought my psp 2 1/2 months ago they said that it had a motherboard that was unhackable? has this past yet and its been hacked so i can do this without harming my psp?

Hi,

So is there a cut off, of FW versions that will defiantly have the TA-082 mobo? So one can just use teh lettering to aviod the FW that has teh new mobo

thanks

That could happen,but, unfortunely ,the recent psp's at the stores have that mobo.if you found one without it recently,you're lucky.

so, since the latest psp fw is 2.6(I), and you can tell from the lettering on box. I look for a psp 1 version back, like 2.5(H). Will this ensure that i WILL NOT GET A TA-082 mobo?

thanks

you could buy a pre owend as more chance of been able to downgrade it

since when did they saturate the market with this mobo?

i want to know itf its too late

peace

Ok, so here's my dilemma.
I have both a 1C1003 AND a 1C6001 on the same PSP.
Can I downgrade or use the mod chip ?