PROBLEM BURNING DVDS WITH NERO 6.3.06C AFTER USING DVD SHRINK SOMEONE PLEASE HELP ME I WILL BE EVER GREATFULL!!!!!

I can go through the dvd shrink process ok its only when nero kicks in it will stop burning and say that its because of an invalid block address or else says cannot connect to trf or just says burning process failed.

I have been able to copy about 5 DVDs successfully before this problem occured i would be extremely greatfull to whoever can help me with this problem

 

Hello.

That's a really old version of Nero. You should download and run the Nero 6 Clean Tool. Be sure to write down your program serial number.

http://ww2.nero.com/nero6/us/Driver_CleanTool_and_RegistryChecker.html
http://ww2.nero.com/nero6/us/Nero_6_CleanTool.html

Then download and install version 6.6.0.18 from the site below:

Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe

Edit: Add

It would be helpful if you would post the last section of your Nero History file located in this path:

Program Files > Ahead > Nero > NeroHistory

Each section begins with a Nero Burning ROM header followed by your name and program serial number. Be sure to delete the name and serial number before posting. The log will help us identify any other problems such as driver conflicts, bad media, out of date firmware, etc.

 

hey
thanks for help. i installed nero 7 and still no luck the burning process is still failing. when is fails all this nonsense pops up...... any chance you know what it means? or how to fix the problem? thanks for your help

1C83-7613-10E5-477X-4022-6KM5-4KC2

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=5, 0, 0, 1, size=22528 bytes, created 17/03/2001 21:34:12
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero API version: 7.2.0.3
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 0, 3

Recorder: <PHILIPS DVD+-RW DVD8631> Version: CD21 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ARRAY iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
PHILIPS DVD+-RW DVD8631 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046612kB)
Free physical memory: 383MB (392360kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.7.2006
NeroAPI
21:11:05 #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted

21:11:05 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

21:11:05 #3 Text 0 File Reader.cpp, Line 124
Reader running

21:11:05 #4 Text 0 File Writer.cpp, Line 113
Writer D: PHILIPS DVD+-RW DVD8631 running

21:11:05 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

21:11:05 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

21:11:05 #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

21:11:05 #8 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

21:12:47 #9 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

21:12:47 #10 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO

21:12:47 #11 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R

21:12:47 #12 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD R/RW, DVD+R DL.)

21:12:47 #13 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [D: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------

21:12:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00

21:12:47 #15 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21:12:47 #16 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

21:12:47 #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started

21:12:47 #18 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.

21:12:47 #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed

21:12:47 #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)

21:12:47 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:12:47 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0c1df200: Len x804

21:12:47 #23 Text 0 File DVDR.cpp, Line 6541
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

21:12:47 #24 CDR -1211 File DVDR.cpp, Line 5667
Book Type set to: DVD-ROM

21:12:47 #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

21:14:06 #26 SPTI -600 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0c143800: Len xc

21:14:08 #27 SPTI -1114 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 40 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 12 00 00 00 00 29
Buffer x00cb0000: Len x10000
0x00 00 01 BA 44 00 44 B5 84 C9 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 10 03 0C 09 13 DC 13 40 18
0x0C 90 22 19 40 29 59 D1 31 90 50 12 48 07 54 6F

21:14:08 #28 CDR -1114 File Writer.cpp, Line 302
Reset occurred
D: PHILIPS DVD+-RW DVD8631

21:14:08 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:14:08 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21:14:09 #31 SPTI -1080 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 3A

21:14:09 #32 SPTI -1080 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 3A

21:14:09 #33 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders

21:14:25 #34 CDR -1080 File WriterStatus.cpp, Line 167
Disc not present
D: PHILIPS DVD+-RW DVD8631

21:14:25 #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

21:14:25 #36 SPTI -1033 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x00
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 04
Buffer x0c144000: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

21:14:25 #37 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 8x (11,080 KB/s)

21:14:25 #38 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

21:14:25 #39 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26/01/2005 02:03:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Hello again.

You need to edit out your program serial number from your post. It begins 1C....... Just click the pencil/paper icon in the upper right of your post to go into edit mode. I'll look at your log and make another post on that.

 

Edit out your serial number.

Laddtboy suggested d/l 6.6.0.18 AFTER you uninstalled Nero6 and run the clean tool, you have installed a "buggy" version of Nero7, so now you will have to uninstall, run Nero6 clean tool, run Nero7 clean tool as well, http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and if you want Nero7 then go for this version, its more stable 7.0.8.2 from here

http://www.filehippo.com/download_nero_7_premium/?845

DMA needs to be on, heres a guide to turn on
http://forums.afterdawn.com/thread_view.cfm/260038

@laddyboy, Sorry, I was typing a response and didnt realize you were still around, Cheers.

 

Back again.

CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 0 ID 0 DMA: Off

Your DMA (direct memory access) transfer mode is off on the burner. It need to be reset.

Right click on My Computer and select Properties.
Click the Hardware tab and then the Device Manager button.
Click the "+" beside IDE ATA/ATAPI Controllers to expand.

For each of the IDE channels, primary and secondary:
Right click on the IDE channel and select Uninstall.

Back in Device Manager:
Click the "+" beside DVD/CD-ROM Drives to expand.
Right click on the name of your burner and select Uninstall.

Restart your system.


I don't think you have a clean install of Nero and you have a version I wouldn't recommend. We need to clean this up and reinstall. Be sure to write down your program serial number before running the Clean Tool.

Download and run the Nero 6 Clean Tool:

http://ww2.nero.com/nero6/us/Nero_6_CleanTool.html

Download and run the Nero 7 Clean Tool:

http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html

For good measure download and run the Driver Clean Tool:

http://ww2.nero.com/nero7/enu/Driver_CleanTool_and_RegistryChecker.html

If yuo want to stick with Nero 7, download and install Nero 7.0.8.2 from the links below:

http://www.filehippo.com/download_nero_7_premium/?845



There's a newer version (GD30) of firmware for your burner at the link below:

http://forum.rpc1.org/dl_firmware.php?download_id=1978

Click on the version number to download it. Double click the downloaded archive to open it. You may have to download WinRAR or WinZip or another unarchiving program to open it. Double click the gd30.exe flasher program and proceed to flash the drive.


Nero wasn't able to specifically ID your media which is usually a problem. The firmware upodate may help. Also be sure to use good quality media like Taiyo Yuden, Verbatim, and Fuji and Sony labeled as Made in Japan. This is an older drive so you may need to locate and use older 8X media. What brand and speed of media are you using?


You need to setup Shrink to not burn to the outer edge of the disk. In DVD Shrink under the Edit menu, select Preferences.... Next clcik the Preferences tab. In the Target DVD Size menu select Custom and enter 4350 in the mb size box.


You can also just output an ISO image file from DVD Shrink and burn that with either ImgBurn or DVD Decrypter. You can also burn with DVD Decrypter directly from DVD Shrink, just like you do with Nero.

 

@Gwendolyn

No problems.