netgear Dg632 Problems "invalid ip address"

i keep getting "invalid ip address" when i do confiqure automatically what do i need to confiqure it manually ."limited or no connectivity" i also get.
the router works fine on other computers . i cant even access the router page
any ideas?
thanks in advance

 

Sounds like your protocol stack is corrupt. Try this.
http://www.snapfiles.com/get/winsockxpfix.html
It rebuild the stack and resets everything. It has worked on several of my machines.

~Rich

 

didnt work for me still says limited or no connectivity
any other ideas?

 

didnt work for me still says limited or no connectivity
any other ideas?

 

What brand router are you using? Do you have another PC hooked up to this router? Whats its IP address? Run 'ipconfig /all' from a command prompt on the other computer and post all the numbers here. We will be able to set you up manually after that.

~Rich

 

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\James>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : pepsi
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 7:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NETGEAR DG632 USB Modem
Physical Address. . . . . . . . . : [removed]
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.20
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 4.2.2.2
4.2.2.1

 

OK...manually configure these settings into the "limited" computer.

IP Address. . . . . . . . . . . . : 192.168.0.21
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers(primary). . . . . . . : 4.2.2.2
DNS Servers(secondary). . . . . . : 4.2.2.1

After you apply these settings, it will take a minute. Be patient. Once the IP properties boxes are closed, you should be able to surf away.

Let me know how it works.

~Rich

 

no didnt work
any other ideas?

 

i also cant get into the routers confiquration page on the limited computer .it is not saying that anymore any way "limited or no connectiv ity"

 

If that didnt work, then there are bigger issues at hand.

Have you tried another cable? Have you tried hooking up this PC directly to your modem (cable or DSL, whichever you have)? Make sure you power cycle the modem once you switch the cables.

~Rich

 

tried all that still not working
any other ideas?