stopping artifacts??

Discussion in 'PC hardware help' started by Lgilmour, Sep 20, 2006.

  1. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    best way to stop this is by getting a new fan?
    if so could someone please recommend me one from overclockers uk?
    i have a sony vaio computer 2.88ghz
     
  2. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    hello excuse me stop what???
    you say new fan i assume that is a overheating problem you have.
    what socket is your cpu 478 pins or 775 lga ??

    http://www.aria.co.uk/ProductsList.asp?Category=13&SubCat=FAN-775

    from there for socket t (775)lga the artic cooler freezer pro or the zalman cnps9500-at if you have a huge case because this is one of the best hsf but is really big.

    http://www.xoxide.com/thermalright-xp-90c-cpu-cooler.html

    this is one of the best heat sink in the market is for socket 478 you can use it with or without a fan but it is recommend it with a 92mm fan that store is not in uk but i post it just for u to see the hsf.

    hope i help

     
  3. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    i have been getting artifacts on the screen, which i think is due to overheating yes. today i purchased(but wont get until tomorrow) is this fan,replacing the main case fan.

    http://www.overclockers.co.uk/acatalog/Papst_Fans.html

    the one i bought is - Papst 3412 N/2 GLE 92mm Fan - 3 Pin (FG-010-PA)
    priced at £9.95

    will this be an improvment:S all i know is about my fan at the moment that its 90mm and is like 2-3 years old.
    im hoping that by replacing this fan with the new one will cool my system down much more?
     
  4. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    ok case fans help good choice but procesors overheat,vga cards overheat you need to cool those directly case fan help you cut few degress but wont solve the problem.

    what procesor temps are you reading??
    how far is your cpu overclock??
    when you are getting this artifacs is your vga card overclock too??
    when you say artifacts you mean in video like dots on screen or lines or wierd colors???
     
  5. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    temps i am reading, are 66!when doing absolutely nothing, and i knwo thats hot. when playing a game i think they shooot up to about 80!
    i get teh artifacts well only playing games such as oblivion, yes i get lines and weird colours mostly. bit of everything to be honest.jst now my computer is at 70! ambient temperature at 57c.
    how can i tell if my graphics card is overclocking?
     
  6. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    ok thats the problem your procesor is overheating you should use better procesar heat sink and fan as i recommend before.

    about video card easy video card idle runs fine when you play games on high resolutions or very intense games like most of todays games the gpu(vga procesor) overheat due to all and load the stress and star to give artifacts.

    normally a overheat cpu procesor cause system crash,freeze op system and slow performance. overheat vga gives you videos artifacts.

    in conclusion.

    1.try to replace procesor heat sink and fan
    2.what video card you have? and i think you should get a better heatsink for that too.
    3.case ventilation also helps the fan you bought 120mm good choice.
    4.when replacing the cpu fan remember to use thermal grease artic silver 5 that can help you cut 5-7 c°
     
  7. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    kool, i my card is a geforce 6800GS 256mb agp*8.

    could you link me/recommend me what to buy to resolve my problem?? thankyou.
     
  8. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    its a powerfull vga card but also runs pretty hot

    i'll post few links for you to seek the same models but in uk stores.
    i need to know procesor socket and brand but if is around 70 c it should be a pentium 4 but what socket 478 or 775 lga i need to know to recomemd you a procesor heatsink and fan.???

    vga coolers:

    http://www.overclockers.co.uk/cgi-b...em_Coolers.html#aSY_2d002_2dZA#aSY_2d002_2dZA

    remember to check compatibility before you buy at www.zalman.co.kr
    they fit most of nvidia 6xxx series but check.


     
  9. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    its a pentium 4 yeah. how do i find out socket i have?
     
  10. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
  11. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    nice where does this fan exactly connect on to?
    same question applies with the arctic silver. ta.
     
  12. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    ok for the vga you have to remove the fan or heatsink from your vga card clean the gpu (vga procesor) beacuse you have to use thermal grease between heatsink and cpu to facilitate heat transfer.

    after you remove your vga card hsf before you install de new one you have to clean the old grease and apply the artic silver the place the new heat sink and fan.

    recomend always to check in fan manufacturer webpage compatibility and installment!

    hope i help
     
  13. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    right so i remove the fan from my card? then replace it with this new one?

    and just out of interest, how much do you think the temperature should drop with that new main fan i bought?
     
  14. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
  15. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    cheers man, you have been a massive help.
     
  16. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    ; )
    when i first came to this forums i didnt know anything about anything i read from others and help others..do the same.

    learn and teach....dpp

    glad i help!!
     
  17. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    hello mate, i purchased the Artic Cooling Accelero X1 Cooler (6800/7800 Series) (SY-001-AR)
    as you recommended! is it easy to put in? do i have to take off the fan of my geforce then replace it with this new one when it arrives? thanks again!
     
  18. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    ok!

    it comes with all the instructions is easy no xpert skill need it to do so. and yes you need to remove your card heatsink and fan beacuse de new cooler will take al the card surface.

    check on the review i sent you is with the same card you have. has a lot of pictures on the install of it.

    http://www.techniz.co.uk/modules.php?nam...t&id=321&page=2

    has 9 pages check them all so you have an idea but it will come with instructions.
     
  19. Lgilmour

    Lgilmour Member

    Joined:
    Dec 29, 2004
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    16
    cheers man, take it this is gonna cool it down loads!? all my problems shall be solved.
     
  20. Dr.xp

    Dr.xp Regular member

    Joined:
    Sep 8, 2004
    Messages:
    492
    Likes Received:
    0
    Trophy Points:
    26
    yes in the review they cut over 22 degress which is great!!! you should by able to play with no mor artifacts..

    ;)
     

Share This Page