i have a problem with my Asus DRW - 1608P3S . I am trying to burn dvd's and the burning goes until it should end.. then when the proccess is 100% a pop`up window come to front and telling me that The process has been started and then everything fails. And i am looking at the error and it says that "could not perform disc at once" .. i did few dvd's and the error did not occure but after i discared the dvd and put it back in the ROM and trying to read the dvd it says that G:/ is not accessible .incorect function
i hate this problem.. i hope you could help me with something.. i was thinking to format the primary partition.. what do you think.. thanks a lot
Have you tried checking your basics ?
what do you mean ?
Have you flashed your Firmware ?
latest one 1.24
Do you have a working ASPI layer ?
yes i took it from ahead
Nero site.
When was your last Disk Defrag ?
today
What is your burner's IDE location ?
i'm not sure what this means i mean does it refear to the way dvd rw is pluged tot the hard drive? :-?
What are your burner's Jumper settings ?
master (and i have an asus cd-rw on slave)
What type of media are you using ?
imation +R
What programs are you using ?
nero 6.0.0.9 (now it is updated to 6.6.1.15a)
Exactly where are you and what are you doing when your error occurs.
it apperd when i was burning a dvd with my movies (data dvd)
What are your PC's specs ?
AMD Athlon(TM)XP 1800+
1.15 GHz , 512 MB or RAM
Do you have any Roxio products installed on your PC ?
not at all
Are you running in PIO or DMA transfer mode ?
DMA (it says both primary IDE and secondly IDE there.. DMA if possible and somethuing about ultra DMA mode 2)
the error:
odin
odinX
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.9
Recorder: <ASUS DRW-1608P3S> Version: 1.24 - HA 0 TA 1 - 6.0.0.9
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.0.0.9
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DRW-1608P3S atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 197MB (202520kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.5.2007
ISO compilation
10:44:16 PM #1 Text 0 File Isodoc.cpp, Line 5748
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:44:16 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
10:44:16 PM #3 Text 0 File Writer.cpp, Line 127
Writer ASUS DRW-1608P3S running
10:44:16 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)
10:44:16 PM #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
10:44:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2137887 (475:05.12)
10:44:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE
10:44:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: ASUS DRW-1608P3S, Media type:
DVD+R
Disc Manufacturer ID: DAXON, Media Type ID: AZ3, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:44:20 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [ASUS DRW-1608P3S ]
--------------------------------------------------------------
10:44:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [ASUS DRW-1608P3S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1552384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
2137130 | lead-in | 0 | 0x00 | 0x41
2137130 | 2 | 0 | 0x00 | 0x41
2137280 | 2 | 1 | 0x00 | 0x41
2137888 | lead-out | 1 | 0x00 | 0x41
10:44:20 PM #11 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started
10:44:20 PM #12 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed
10:44:20 PM #13 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 16.1x (22,218 KB/s)
10:44:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #2137280
10:44:20 PM #15 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type:
DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 07 44 41 58 4F 4E 00 - 00 00 41 5A 33 00 38 23 ..DAXON...AZ3.8#
54 37 14 00 23 6F 00 7D - 6A 17 19 0C 0C 0A 0B 01 T7..#o.}j.......
19 1B 0B 0B 0E 0F 01 00 - 00 00 00 00 00 00 00 01 ................
10:44:20 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:54,932 (54932ms) -> OK
10:44:20 PM #17 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 2137280
DVD high compatibility mode: Yes
10:44:20 PM #18 Text 0 File WriterStatus.cpp, Line 113
<ASUS DRW-1608P3S > start writing Lead-Out at LBA 2137888 (209F20h), lenght 0 blocks
10:44:20 PM #19 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion
10:44:50 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
10:44:50 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x03
10:44:50 PM #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
10:44:50 PM #23 CDR -1066 File ThreadedTransferInterface.cpp, Line 1620
Invalid field in command
10:44:50 PM #24 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1620
Could not perform end of Disc-at-once
10:44:50 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
10:44:50 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
10:44:50 PM #27 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 16.1x (22,218 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 7:12:26 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
______________________________________________________________
DEFRAG:
Volume (C:)
Volume size = 9.92 GB
Cluster size = 8 KB
Used space = 7.83 GB
Free space = 2.09 GB
Percent free space = 21 %
Volume fragmentation
Total fragmentation = 9 %
File fragmentation = 17 %
Free space fragmentation = 1 %
File fragmentation
Total files = 39,610
Average file size = 169 KB
Total fragmented files = 40
Total excess fragments = 5,671
Average fragments per file = 1.14
Pagefile fragmentation
Pagefile size = 768 MB
Total fragments = 642
Folder fragmentation
Total folders = 2,821
Fragmented folders = 73
Excess folder fragments = 215
--------------------------------------------------------------
regards
