Originally posted by robjimi:

---

This didn't work unfortuneatly, still the same outcome as before

---

Did you put all the frequencies i gave you also may be ntl frequencies for ireland are different. You have to check symbol rate and put the one which is already working there. Also what frimware you are using? You have to make sure signal is clear in your cable line as it effects the reception. And last thing is there are also bad eurovox max being sold. hope yours is not one of them.

The box is fine because it worked ok before i restored factory settings. The firmware version is 1.0 SSC$ Feb 14 2007. I put in all the frequencies you gave me but it failed to work. I apprciate all your help

I managed to get all the channels back but sky movies premier for example was working perfectly when i only got 60 channels but now i've got 130 channels it's all broken up as it was before. Thanks for your help. Any more advice would be greatly apprciated.

Originally posted by robjimi:

---

I managed to get all the channels back but sky movies premier for example was working perfectly when i only got 60 channels but now i've got 130 channels it's all broken up as it was before. Thanks for your help. Any more advice would be greatly apprciated.

---

Sky premier should be in one of NUMBERED channels as well such as TVC1 and stuff you just have to scroll through all un named channels and also SKY channels which say HID next to them work. Also SD1 and SD2 are Sky HD movies channels which work fine. U just have to take your time and scroll through channels. Look for sky premiere hid, or sky premier1 or TVCH (1......30). Just take your time it should be sitting somewhere.

Hi all
I have a euro-vox 06(working grand)and euro-vox 07(61 chs & updating)
is it possable to transfar SW from 06 box to 07 box.
I have cable,and have done it many times on starviews
Thanks

Originally posted by des61:

---

Hi all
I have a euro-vox 06(working grand)and euro-vox 07(61 chs & updating)
is it possable to transfar SW from 06 box to 07 box.
I have cable,and have done it many times on starviews
Thanks

---

Nope it wont work on 07 box as they take two different boot version of software. 06 is V02 and 07 is V03 so even if you do it your 07 box wont work. SO i would say dont do it.

any one know where i can get any of the 06 boxes. My cable provider has done something to the signal around my area here in Waterford and the 07 boxes wont work here but strangely enough the 06 ones are grand. Its not actually the box itself because i tried them in other areas and they are perfect. I ended up swapping two 07 for two 06 and mine are grand now but need more. Any help at all is much appriciated..

Is anyone aware of any new software available for 2007 box released in the last few weeks.

nedser
i have red box firmware dated 01/06/07 if you are behind that you can pm me with your email and i will send it to you
frank

hello could anyone tell me what freq r@cing uk is on i'm on n#l in dublin.

394250.
this is the frequency for r@cing uk.when scanning make sure your connected to the main cable not a split one

hello ryan i tried that freq but had no luck.

gttdi
i am in dublin on ntl my racing uk is on 395,000

i have it now on 395000 there must have been a bad signal in the area; thanks again.

good site for info on eurovox software etc

http://www.i'manidiot.com edited by ddp

[quote=cafu21]good site for info on eurovox software etc

removed

Hello benten22

cafu21, lightning struck!!! post edited
cafu21 (account created on 28 Jun, 2007) has used same IP address as benten22 (banned on 26 Jun, 2007)

Originally posted by ddp:

---

cafu21, lightning struck!!! post edited
cafu21 (account created on 28 Jun, 2007) has used same IP address as benten22 (banned on 26 Jun, 2007)

---

:) quick as lightning ddp

i try to be

Hi Folks,

I bought Eurovox Max 2007 today...unfortunately I am already in a problem with the Box.

I tried to Lock the adult channels instead I've ended up losing my pin....now I can't change any of the settings. Can someone please help me. Is there nothing I can do to retrieve my pin? Is there no factory restting? Without the pin I can't change anything or rescan when I need to.

Many Thanks

The master code 1007

Hey! Just got my Eurovox 2007 (red box), when you power it on it just stays in standby, with little dashes across the display and it won;t turn on or off then, I hooked it up to the pc but the pc can;t detect it, sounds like a dud to me, anyone have anything similar? tks!

is anybody haven a no signal reading even after pipe scart are all cheked a freind of mine has had his box 2 years i wonder do they need a update

Originally posted by aidodub:

---

is anybody haven a no signal reading even after pipe scart are all cheked a freind of mine has had his box 2 years i wonder do they need a update

---

are you sure you didnt put the cable in to the wrong socket by accident? check that its in the rf in socket on the eurovox

Hi all just wondering if anyone has bought or even heard of the new 2008 series of the Eurovox and if so what's the difference with the older ones..