|
The Official OC (OverClocking) Thread!
|
|
|
NO Fanboy comments needed
|
Senior Member
|
25. August 2009 @ 15:50 |
Link to this message
|
|
what are the votlages you are using, Vcore, Vnb, VTT etc?
My MGR (Micro Gaming Rig)
Intel E5200 @ 3.65GHz .|. DFI Jr P45-T2RS Micro ATX .|. 4GB (2x2GB) PC2-8500 Geil Black Dragon RAM .|. Samsung F1 640GB HDD .|. Pinoeer DVR-216DBK ODD .|. Silverstone NT-06E CPU cooler (passive) .|. Sapphire 4870 512MB .|. Silverstone Sugo Micro ATX SG02-F Evolution .|. NorthQ Black Magic 850W PSU .|. 24" 1920x1200 DGM MVA Monitor .|. 24" 1920x1080 Dell TN Monitor .|. |
|
Advertisement
|
|
|
|
|
bigwill68
Senior Member
6 product reviews
|
12. September 2009 @ 18:33 |
Link to this message
|
|
AfterDawn Addict
5 product reviews
|
12. September 2009 @ 18:35 |
Link to this message
|
|
Bigwill...you're awesome!!! Your where I want to be in the next few months. Just don't have the funds to play around right now :(
Are YOU in the zone?  This message has been edited since posting. Last time this message was edited on 12. September 2009 @ 18:35
|
|
bigwill68
Senior Member
6 product reviews
|
12. September 2009 @ 19:26 |
Link to this message
|
Originally posted by omegaman7:
Bigwill...you're awesome!!! Your where I want to be in the next few months. Just don't have the funds to play around right now :(
thanks omega...atlease i like to plan ahead...i don't have the funds either..I wanna sell all my old stuff and get new stuff hopefully...I'll have another biostar brother in here with you next year...lol
|
AfterDawn Addict
4 product reviews
|
12. September 2009 @ 20:02 |
Link to this message
|
interesting stuff, note the 4.25Ghz Phenom on air, versus the 4.6Ghz i5 on air :P
because there is no real bus limitation for the Phenoms they can clock the highest on LN2 due to the voltage freedom. Note that the i5s top out at 1.65V versus the Phenoms at 1.9V!
The overclocking podium for the i5 750, which are no more than 50mhz apart (8mhz for 1st to 2nd) are shared between MSI's GD65 and GD80 boards and the Biostar TP55 which takes the top spot - just!
|
AfterDawn Addict
|
12. September 2009 @ 20:09 |
Link to this message
|
GigaByte MA790GP-UD4P MB w/Athlon IIx4 630 OCd to 3.51GHz - Arctic Freezer 64 Pro CPU Cooler - 4 GB Corsair Dominator DDR2/8500 at 5-5-5-15 @880 MHz - Cooler Master Centurion 534+ Case with 460 watt PSU - Seagate 160GB SATA 3.0 - Hitachi 250GB SATA 3.0 - 2 Optiarc AD7220 20x DVD-Burners - Sceptre X20 Naga III 20.1" Digital LCD "Widescreen" - Sony 425 Watt Digital Audio Control Center 5.1 PL-II Suround,And a little "Alien Expertise"! ...
"With Your Arms around the Future and Your Back up against The Past" The Moody Blues
 |
AfterDawn Addict
4 product reviews
|
12. September 2009 @ 20:17 |
Link to this message
|
Yeah the interesting thing is that while the CPUs themselves are great for overclocking, because they house the northbridge, that part of the CPU needs extra voltage to overclock well. Up it a bit though and they take off like wildfire.
|
|
nesrray
Suspended permanently
|
15. September 2009 @ 09:28 |
Link to this message
|
|
I think you are overclocking too much :)
|
Member
|
15. September 2009 @ 12:14 |
Link to this message
|
Originally posted by nesrray:
I think you are overclocking too much :)
That isn't possible!!!!
I could put something funny here but I cant be arsed. Now GO AWAY! |
Senior Member
|
15. September 2009 @ 12:28 |
Link to this message
|
Originally posted by nesrray:
I think you are overclocking too much :)
TAKE BACK THOSE WORDS RIGHT NOW! >8-{
My MGR (Micro Gaming Rig)
Intel E5200 @ 3.65GHz .|. DFI Jr P45-T2RS Micro ATX .|. 4GB (2x2GB) PC2-8500 Geil Black Dragon RAM .|. Samsung F1 640GB HDD .|. Pinoeer DVR-216DBK ODD .|. Silverstone NT-06E CPU cooler (passive) .|. Sapphire 4870 512MB .|. Silverstone Sugo Micro ATX SG02-F Evolution .|. NorthQ Black Magic 850W PSU .|. 24" 1920x1200 DGM MVA Monitor .|. 24" 1920x1080 Dell TN Monitor .|.
|
|
ddp
Moderator
|
15. September 2009 @ 13:48 |
Link to this message
|
|
nesrray, because of spam in sig, lightning struck!!!
|
AfterDawn Addict
4 product reviews
|
21. September 2009 @ 08:10 |
Link to this message
|
|
Lulz, you could at least have pretended you banned him for that comment! :)
|
AfterDawn Addict
4 product reviews
|
29. September 2009 @ 18:42 |
Link to this message
|
hey all. ive learned alot here lately.. for one i didnt know and havent done so until a couple days ago, but when OC'ing you should in bios load optimised default settings. never new that never did it. but damn does it make a big difference. all this time i have been forceing my OC's so ive set everything back to stock and started over. there is alot adjusted for you once choosing optimized defults... im now running 3.7ghz with a measly 1.2825 vcore with the vdrop im running at 1.200v here is my settings as of right now.
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...................: Fast
CPU Clock Ratio ...........................: 8
Fine CPU Clock Ratio.......................: 0.5
CPU Frequency .............................: 3706 MHz (436*8.5)
Clock Chip Control
Standard Clock Control
CPU Host Clock Control.....................: [Enabled]
CPU Host Frequency (Mhz) ..................: 436 MHz
PCI Express Frequency (Mhz) ...............: 100
C.I.A.2 ...................................: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive............................: <<< 800
PCI Express Clock Drive....................: <<< 900
CPU Clock Skew (ps)........................: <<< 0ps
MCH Clock Skew (ps)........................: <<< 0ps
DRAM Performance Control
Performance Enhance........................: [STANDARD]
Extreme Memory Profile (X.M.P.)............: [Disabled]
(G)MCH Frequency Latch.....................: [Auto]
System Memory Multiplier ..................: [2.00D]
Memory Frequency (Mhz) ....................: 872
DRAM Timing Selectable ....................: [Manual]
Standard Timing Control
CAS Latency Time...........................: 4
tRCD ......................................: 5
tRP'.......................................: 4
tRAS.......................................: 11
Advanced Timing Control
tRRD.......................................:
tWTR.......................................:
tWR........................................:
tRFC.......................................:
tRTP.......................................:
Command Rate (CMD) ........................:
Driving Strength Profiles
Driving Strength ..........................: 800
Channel A
Static tRead Value.........................: 8
tRD Phase0 Adjustment......................: Auto
tRD Phase1 Adjustment......................: Auto
tRD Phase2 Adjustment .....................: Auto
tRD Phase3 Adjustment......................: Auto
Trd2rd(Different Rank).....................: Auto
Twr2wr(Different Rank).....................: Auto
Twr2rd(Different Rank).....................: Auto
Trd2wr(Same/Diff Rank).....................: Auto
Dimm1 Clock Skew Control...................: Auto ps
Dimm2 Clock Skew Control...................: Auto ps
Channel B
Static tRead Value.........................: 8
tRD Phase0 Adjustment......................: Auto
tRD Phase1 Adjustment......................: Auto
tRD Phase2 Adjustment .....................: Auto
tRD Phase3 Adjustment......................: Auto
Trd2rd(Different Rank).....................: Auto
Twr2wr(Different Rank).....................: Auto
Twr2rd(Different Rank).....................: Auto
Trd2wr(Same/Diff Rank).....................: Auto
Dimm1 Clock Skew Control...................: Auto ps
Dimm2 Clock Skew Control...................: Auto ps
Motherboard Voltage Control
CPU
Load-Line Calibration......................: [Enabled] i dont have this option.
CPU Vcore............1.25000V..............: 1.2825V
CPU Termination......1.200V*...............: 1.200V
CPU PLL..............1.500V*...............: 1.500V
CPU Referen..........0.760V*...............: Auto
MCH/ICH
MCH Core.............1.100V................: 1.200V
MCH Reference........0.760V................: Auto
MCH/DRAM Ref.........0.900V................: Auto
ICH I/O..............1.500V................: 1.500V
ICH Core.............1.100V................: 1.100v
DRAM
DRAM Voltage ........2.000V................: 2.100V
DRAM Termination.....0.900V................: Auto
Channel A Reference..0.900V................: Auto
Channel B Reference..0.900V................: Auto
Advanced Settings
Limit CPUID Max. to 3......................: [Disabled]
No-Execute Memory Protect..................: [Enabled]
CPU Enhanced Halt (C1E)....................: [Disabled]
C2/C2E State Support.......................: [Disabled]
x C4/C4E State Support.....................: [Disabled]
CPU Thermal Monitor 2(TM2) ................: [Enabled]
CPU EIST Function..........................: [Enabled]
Virtualization Technology..................: [Enabled]
Integrated Peripherals
Legacy USB Storage Detect .................: [Enabled]
plus im back on my ddr2 800 mushkin mem. the ddr2 1066 corsair dominators i had to RMA 1 stick was faulty.
|
|
ddp
Moderator
|
29. September 2009 @ 19:44 |
Link to this message
|
|
rob, edit your sig.
|
|
bigwill68
Senior Member
6 product reviews
|
29. October 2009 @ 23:52 |
Link to this message
|
1st Test is in ibt
everest
T-Power 2
Gonna drop the volts and see how she runs and do some Prime95 testing over the weekend and installing all my programs.I got 2
many computers to be working on.lol. I'm happy with the UpGrade
of a Few Parts to get the Job...I'll be back with more results
|
|
Advertisement
|
|
|
Senior Member
15 product reviews
|
30. October 2009 @ 00:24 |
Link to this message
|
|
Oh very nice. I am impressed :)
AMD Phenom II 940 BE @ 3.708GHz 18 x 206MHz 1.45v w/ Tuniq Tower 120(lapped), DFI LanParty DK 790FX-M2RS, 2 x 2GB Mushkin XP Ascent PC2 6400 @ DDR2 825 CL 4-4-4-12 w/ 2.1v, 2 x Sapphire HD4870 512MB Crossfire @ (750/1800), Creative X-Fi Xtreme Music, 2 x Seagate Barracuda 500GB 32MB Cache SATA, Thermaltake Armor Series Case, 2 x 120mm fans, 2 x 90mm fans, Corsair 620HX PSU, Dell UltraSharp 2407WFP 1920 x 1200 LCD Monitor
My Other Systems: http://my.afterdawn.com/estuansis/ Computers are sexual. |
