1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

NEW CO*LSAT 6000

Discussion in 'Digital TV - UK & Europe' started by slick2404, Oct 30, 2006.

  1. slick2404

    slick2404 Member

    Joined:
    Oct 30, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    So I finally got sick of my old receiver that didnt work...(and was a clone) so I picked up the csat6000 AND ITS FINNALY IN!

    ...one thing....i dont know how to set it up

    PLEASE HELP, all dishes and what not should be aligned from the last receiver
     
  2. slick2404

    slick2404 Member

    Joined:
    Oct 30, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    so i got it working, but i cant get my two dishes to work at the same time. its either the 148 or 119. any ideas
     
  3. Jerry746

    Jerry746 Senior member

    Joined:
    Oct 23, 2003
    Messages:
    3,879
    Likes Received:
    0
    Trophy Points:
    116
    If the 2 dishes worked before with your old receiver, then it probably has to do with the settings in you antenna setup. The desq. switch port settings have to match the input from the sats. If sat 119 input goes to port 1, make sure it shows that in the receiver setup. Match 148 input the same way.

    Jerry
     
  4. slick2404

    slick2404 Member

    Joined:
    Oct 30, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    hey thanks it worked!

    whats the set up to get BEV? i only get DNET
     
  5. Jerry746

    Jerry746 Senior member

    Joined:
    Oct 23, 2003
    Messages:
    3,879
    Likes Received:
    0
    Trophy Points:
    116
    BEV usually requires aiming another dish at the BEV sats. They are at 82 and 91 degrees. Once the dish is aimed you just run the cable to the extra ports of the switch and set up the same as you did for DN.

    Jerry
     

Share This Page