1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WHAT ABOUT HARD MOD????? HELP!!!

Discussion in 'Xbox - Hardware boot discussion' started by lucifa666, Nov 11, 2006.

  1. lucifa666

    lucifa666 Guest

    I flashed my xbox bios with a wrong sized one and now my xbox shit itself. It turns on but the light at the frount flashes red than green, Nothing comes up on the screen. It has a Aladdin Advance mod chip. It dosent load orignal games or dvds or the evox disc i made which is what allowed me to flash the bios.
    Is there any way to fix this when i cant ftp into my xbox now?
     
  2. theridges

    theridges Guest

    unless there is a way to reflash the chip then you will have to get a new one...
     
  3. lucifa666

    lucifa666 Guest

    I have bought a new mod chip, How can i fix my problem.
    Thanks for your time!!!!
     
  4. theridges

    theridges Guest

    What modchip is it?
    and have you already installed it?
     
  5. lucifa666

    lucifa666 Guest

    No i havent installed it yet! It is a XECUTER 2.6 CE!!!!
     
  6. theridges

    theridges Guest

    alright is it solderless?
    do you still have your old pin header in from the other chip?
     
  7. lucifa666

    lucifa666 Guest

    No it needs solidering! and my old one was also solderd in! i know how to put it in, but i think i need a new xbox as the old one has nothing on it! how would puting a new chip in it fix a flashed bios? even when i took the old one out it didnt change the xbox!
     
  8. theridges

    theridges Guest

    when you took the chip out the xbox was still fragging?
    that means something is wrong with motherboard...
    When you flash the bios its the bios on the chip not the motherboard,So usually replacing or removing the chip will fix this problem, but you still have a Frag Error even the when chip is removed which means something is wrong with the motherboard of the xbox..how did you take the old chip out??
     
  9. lucifa666

    lucifa666 Guest

    Yeah when i took the old one out (by pulling the wires out)I done it carefully but i just pulled them out i didnt unsoilder the wires.
    When i took the old mod out and the xbox didnt change, thats what made me think it was the xbox itself. Even if i unplug the hard drive,motherbord,cd rom it still dose the same thing! Thats why i think im just going to have to buy a new xbox! How could flashing my chip fusk my motherbord, Or do you think it was something eles?
     
  10. theridges

    theridges Guest

    i think it was your soldering not the modchip...
     
  11. lucifa666

    lucifa666 Guest

    I bought the xbox of my best mate, He had it for 2 years and he got it moded when he first got it! It was moded by a pro and worked fine for years, Then i got it and also had it for about a year with no problems, After a while all the burnt games i had got scrached and i had no way of getting more, so i thought i would try to make game copys for myself. Thats when i flashed the bios and its been fucked ever since. I had never taken the xbox apart untill i had allready flashed it!
     
  12. theridges

    theridges Guest

    if it already played burned games then why did you reflash the chip?
     
  13. lucifa666

    lucifa666 Guest

    I done this because i read a shity tut about putting the evox dashbord on your xbox permently, Thay said to flash the bios through the evox cd that i had made in order to FTP into my pc. I didnt know any better and done it! Now i have a bit more know-how i cant belive i done it and have been trying to reverse it for about 2 fucken months!!!
     

Share This Page