Tutorial - Make Your Nintendo Wifi USB Connector A SoftAP [page 46/53]

LemonBox

Newbie

Can we post this guide on other sites?

ppierce

Newbie

Please post drivers for use with this method that are Vista x64 compatible.

The NETU2G54.inf in the rar package will not work w/x64.

Zypher_X

Send private message to this user

Newbie

When it said to put an WEP on the manual settings... I had no idea what to do.. you didn't show how to get a WEP.

I have a modem.

saint101

Send private message to this user

Junior Member

Originally posted by Zypher_X:
When it said to put an WEP on the manual settings... I had no idea what to do.. you didn't show how to get a WEP.

I have a modem.

to set up a WEP, go to encryption, change the data encryption to WEP, and either make your own WEP passcode, or click on the automatic generation, write down what it says either in key 1,2,3 or 4, and select your default key (the one you wrote down)

This message has been edited since its posting. Latest edit was made on 22 Apr 2008 @ 0:08

Zypher_X

Send private message to this user

Newbie

Originally posted by saint101:

Originally posted by Zypher_X:
When it said to put an WEP on the manual settings... I had no idea what to do.. you didn't show how to get a WEP.

I have a modem.
to set up a WEP, go to encryption, change the data encryption to WEP, and either make your own WEP passcode, or click on the automatic generation, write down what it says either in key 1,2,3 or 4, and select your default key (the one you wrote down)

k. I got a few questions...

- the ip address and the subnet mask for the computer or the Wireless Network Connection?
- How do i get the gateway?
- How do i get the primary dns?

What should i put for...
- IP ADDRESS
- SUBNET MASK
- GATEWAY
- PRIMARY (OR/AND SECONDARY)DNS

thank you.

This message has been edited since its posting. Latest edit was made on 22 Apr 2008 @ 18:36

saint101

Send private message to this user

Junior Member

@ Zypher_X

im guessing you inputting the ip and everything into your ds?

IP address:the ip address you put into the device 192.168.0.xx
replace xx with any 2 digits.

subnet mask: 255.255.255.0

gateway: 192.168.0.1

primary DNS: 192.168.01

secondary DNS is not needed so you leave it blank

the gateway and primary DNS is the ip address of the NWCUSBAP and the ip address is the number assigned to the device

this should work, if any problems occur just post them and ill try and answer them

oh and by the way, the ip address you assign to device, the last 2 digits must be different for each one others it wont work

This message has been edited since its posting. Latest edit was made on 23 Apr 2008 @ 4:26

chechity

Send private message to this user

Newbie

please i need help i try everything you say then i go to the ds and conect but it wont conect it say can connect to nintendo wifi i check the wifi connection an no packets are being receive help

plopo

saint101

Send private message to this user

Junior Member

Originally posted by chechity:
please i need help i try everything you say then i go to the ds and conect but it wont conect it say can connect to nintendo wifi i check the wifi connection an no packets are being receive help

try turning hide SSID off, then doing an auto scan on your ds. if it picks the signal up just change the ip address from auto to 192.168.0.xx and see if that works

chechity

Send private message to this user

Newbie

Originally posted by saint101:

Originally posted by chechity:
please i need help i try everything you say then i go to the ds and conect but it wont conect it say can connect to nintendo wifi i check the wifi connection an no packets are being receive help

try turning hide SSID off, then doing an auto scan on your ds. if it picks the signal up just change the ip address from auto to 192.168.0.xx and see if that works

i have done all that my ds picks up the conection and i give my ds already and a ip

plopo

saint101

Send private message to this user

Junior Member

Originally posted by chechity:

Originally posted by saint101:

Originally posted by chechity:
please i need help i try everything you say then i go to the ds and conect but it wont conect it say can connect to nintendo wifi i check the wifi connection an no packets are being receive help

try turning hide SSID off, then doing an auto scan on your ds. if it picks the signal up just change the ip address from auto to 192.168.0.xx and see if that works
i have done all that my ds picks up the conection and i give my ds already and a ip

this happened to me once, try setting it up again on the ds, so set up connection 2 or 3, do a auto-scan and put in the ip address again before it tests the connection

chechity

Send private message to this user

Newbie

Originally posted by saint101:

Originally posted by chechity:

Originally posted by saint101:

Originally posted by chechity:
please i need help i try everything you say then i go to the ds and conect but it wont conect it say can connect to nintendo wifi i check the wifi connection an no packets are being receive help

try turning hide SSID off, then doing an auto scan on your ds. if it picks the signal up just change the ip address from auto to 192.168.0.xx and see if that works
i have done all that my ds picks up the conection and i give my ds already and a ip
this happened to me once, try setting it up again on the ds, so set up connection 2 or 3, do a auto-scan and put in the ip address again

before it tests the connection

it dint work

plopo

saint101

Send private message to this user

Junior Member

Quote:
it dint work

hmm i have a few things left in mind
1. make sure the device is allowed to access internet if you have any firewalls blocking it.
2. enter the ds' mac address into the allow list.
3. stand really close to the access point
4. unplug the NWCUSBAP and plug it in again and try it again
5. keep on trying

im not certain how i managed to get it to work but doing something like that did make it work, good luck :)

NeoAg7

Send private message to this user

Newbie

Okay I've been getting the same "Cannot Copy Driver To System Directory" that everyone else seems to be getting. Only problem is that I'm SURE I've copied the usb.sys file to the system32 directory. I've copied it, recopied it, then re-recopied it. It's there. Still getting the error. Anyone know any way to fix this?

EDIT: After a reboot, some MORE recopying, and some threats to shoot the computer, it finally decided to work -_-

This message has been edited since its posting. Latest edit was made on 27 Apr 2008 @ 8:14

beachguy9

Send private message to this user

Newbie

so will this work for a ps3 connection and a psp? i'm sure my ques was answered in the thread already but don't wanna look through 47 pages of stuff. can any 1 please answer me? thanks

beachguy9

Send private message to this user

Newbie

any 1?

saint101

Send private message to this user

Junior Member

Originally posted by beachguy9:
so will this work for a ps3 connection and a psp? i'm sure my ques was answered in the thread already but don't wanna look through 47 pages of stuff. can any 1 please answer me? thanks

yep it should work for both a ps3 and psp

TheStar4

Send private message to this user

Newbie

I did steps 1-3, but now every time I open ASUS WLAN COntrol Center I get this message " Unable to connect to to the wireless lan card. The tray icon will be loaded once the card is inserted" How can I pass this probelm, I've been at it for weeks now.

CCultist

Send private message to this user

Newbie

I've been having some problems with my PSP and wifi lately. When I want to connect I have to do it 5 or 6 times because it says the access point is not detected. It works fine with my GF's wifi router so I don't think it's the PSP.

Anybody know what could cause that?

Zypher_X

Send private message to this user

Newbie

Saint, I tested your settings and the results were...

You know that wi-fi icon? the one that has like 3 bars... something like this... (facing the other way)

|
| |
| | |

Yeah, well, it was red for like 3 seconds. then it turned green for like 2 seconds. then it went back to red and it had an error.

PLEASE HELP ME!!

BTW, Saint, if you have an MSN send me your e-mail or add mine.

This message has been edited since its posting. Latest edit was made on 05 May 2008 @ 21:26

saint101

Send private message to this user

Junior Member

Zypher_X i emailed you, also remove your email address from the post to prevent it from being attacked by spam

billyboy7

Send private message to this user

Newbie

Hey, I'm trying to do the Nintendo wi-fi hack. I've followed the steps so far, I've got the modded drivers working, so my Nintendo wi-fi is now picked up as a Buffalo, but I'm having trouble on the next step, installing the ASUS control center, it crashes when it's run, saying "The application failed the initialize properly (0x0000005)". I've also tried installing the Buffalo Client Manager V, but at the end of the installation, it says "install failed" and when you try to run the program, it tells you the same thing. HELP!!

Narroo

Send private message to this user

Newbie

Yarghh! I've been trying this for hours!!!! But nothing works!
I've followed the steps to heart!
I've done everything exactly as I am supposed too!
I can even locate the USB thing by scaning!
But As soon as I test my connection, in claims that It can't find it!
I geta 51300 or 51301 error, which nintendo claims is WEP key issue, even though I am not using one!
Anyone have any idea what could have gone wrong?

EDIT::::Dear god, I don't know what I did, but its working?!
I was aimlessly messing around with the ASUS program, and I tried to save a 2nd configuration with some of the settings I changed, though I knew it was futile, since those settings didn't work before. But to my dismay, when I got back to the setting page, the SoftAP, and possibly all my other settings were reset. So I checked SoftAP, nothing else, applied, did a Auto-Scan with my DS, and for some strange reason, it worked. I have no clue as to why. I try my PSP, and then put some encryption on it. I'll cross my fingers!

This message has been edited since its posting. Latest edit was made on 11 May 2008 @ 20:17

saint101

Send private message to this user

Junior Member

Originally posted by Narroo:
Yarghh! I've been trying this for hours!!!! But nothing works!
I've followed the steps to heart!
I've done everything exactly as I am supposed too!
I can even locate the USB thing by scaning!
But As soon as I test my connection, in claims that It can't find it!
I geta 51300 or 51301 error, which nintendo claims is WEP key issue, even though I am not using one!
Anyone have any idea what could have gone wrong?

EDIT::::Dear god, I don't know what I did, but its working?!
I was aimlessly messing around with the ASUS program, and I tried to save a 2nd configuration with some of the settings I changed, though I knew it was futile, since those settings didn't work before. But to my dismay, when I got back to the setting page, the SoftAP, and possibly all my other settings were reset. So I checked SoftAP, nothing else, applied, did a Auto-Scan with my DS, and for some strange reason, it worked. I have no clue as to why. I try my PSP, and then put some encryption on it. I'll cross my fingers!

lol same with mine, its quite odd, you mess around with it, then it works then all you can give advice to someone is just to messa round with it

dradsa

Send private message to this user

Newbie

i set it all up and everything...no errors on my pc end but when i go onto my psp and auto scan it, it says ip search time out or something like that. when i manual entered it all i get dns error...please help.

saint101

Send private message to this user

Junior Member

Originally posted by dradsa:
i set it all up and everything...no errors on my pc end but when i go onto my psp and auto scan it, it says ip search time out or something like that. when i manual entered it all i get dns error...please help.

have you tried doing the same setings as the psp picture on the first page of this forum?