Hi there all, having some trouble with header connectors, colours etc, below is link to mother board and case I have just bought, also below the header configuration I have attached to the board hope it all makes sense, sure it will to someone, many thanks for looking. http://www.asrock.com/mb/overview.as...F6G-VSTA&s=939 http://www.apevia.com/product.php?pi...b18eaf17a21ff4 usb header top row usb_pwr = red p-9 = white p+9 = green gnd = black dummy = black bottom row usb_pwr = red p-8 = white p+8 = green gnd = black system panel header top row pled + = black pled - = green pwrbtn# = white gnd = black bottom row hdled + = black hdled - = red gdn = black reset # = white front panel audio header top row gnd = black presence# = empty mic_ret = brown out_rec = blue bottom row mic2_l = red mic2_r = white out2_r = green j_sense = empty out2_l = yellow chasssis speaker header +5v = black speaker = red Many thanks again for you time. Andrew
the links are broke m8, sorry. the color wont realy matter for the leds but the front audio an usbs will.
Thanks for that new links below, if anyone can help Thanks http://www.asrock.com/mb/overview.asp?Model=939NF6G-VSTA&s=939 http://www.apevia.com/product.php?pid=147&xcSID=48e8275b27eda2b80c486358f53fef27
download the pdf manual from that link for your mobo it will show you which wire goes to which pin in that.
Hi thanks for that I have the manual, but it does not tell u which colours relate to what usb_pwr ? p-9 ? p+9 ? gnd ? etc etc etc what I have listed is the colours I presume are right but am unsure and was just asking if someone who new might cast an eye over what I have listed to see if it seems correct or not. Many thanks Andrew
don't go by colors all the time, look at the wire connectors as there will be some printing on them like d+ & d-
