I need to make my own DVD-ROM disk.

I want to copy a DVD-ROM nav disk. It needs to be a DVD-ROM copy. I can't find any programs that will do this. anyone know how I can get this done ??

 

sorry, i suppose nero could do it.

 

i use nero

 

to make a dvd rom, you have to have a disc press and all the materials required there in to stamp your own discs.


however, if you have a dvd burner capable of booktyping, you can booktype a dvd+r disc when it burns so that drives reading it will see it as a dvd-rom, and not a +r disc.

what model burner do you have?

*edit*
also, we have a rule on here about no pimping your own site. so please, either ditch the link in your sig or get a mod's approval, ASAP.

 

IT'S A SONY DRX-S50U AND THE SPECS ARE:




General
Disc Capacity : 8.5GB/4.7GB

Hardware
Interfaces : USB 2.0
Loading Mechanism : Motorized Tray
Media & Modes Supported : DVD-R/-R DL/-RW, DVD+R/DVD+R DL/+RW
DVD-RAM: DVD-ROM, DVD-Video
CD: CD-DA, CD-ROM (XA), CD Extra, Video CD, Photo CD1, CD Text, multi-session
Mount Design : Horizontal

Inputs and Outputs
USB Port(s) : 1 (2.0)

Memory
Buffer Memory : 2MB

Operating Conditions
Sustained Transfer Rate : 10.5MB/s (8x DVD-ROM)
Burst Transfer Rate : 480MB/s
Average Access Time : 180ms (DVD), 150ms (CD)

Optical Drive #1
CD Read : 24X
CD-R Write : 24x CAV, 24x ZCLV, 16x ZCLV,
8x CLV2
CD-RW Write : 24x ZCLV2, 20x ZCLV2,
10x ZCLV1, 4x CLV
DVD Read : 8x
DVD+R DL Write : 4x ZCLV, 2.4x CLV3
DVD+R Write : 8x CAV2, 8x ZCLV2, 6x ZCLV2,
4x ZCLV1, 2.4x CLV
DVD-R Write : 2x (CLV), 4x (6x Z-CLV), 8x CLV max2
DVD+RW Write : 8x ZCLV2, 6x ZCLV2, 4x ZCLV1,
2.4x CLV
DVD-R DL Write : 4x ZCLV, 2x CLV3
DVD-RAM Write : 5x ZCLV, 3x CLV, 2x CLV2
DVD-RW Write : 6x ZCLV3, 4x ZCLV2, 2x CLV1,
1x CLV

Power
Power Requirements : +5V
Power Consumption : 2.0A max (+5V DC)

Service and Warranty Information
Limited Warranty : 1 year Limited Warranty

System Requirements
Hard Drive : 1GB (hard disk minimum), 10GB (DVD video creation)
Operating System : Windows® Vista, Windows XP Home or Professional (SP2) Operating Systems or Windows® 2000 (SP4) Operating Systems
RAM : 256MB
Processor : Pentium® III 800MHz or faster (or equivalent) CPU minimum.
Pentinum IV 2.0GHz or faster (or equivalent) CPU is recommended for real-time video authoring/editing.

 

assuming you have nero 6 (should work for 7, too, i think):

1. This tutorial assumes that you have a working ISO to burn
2. Put in a Blank DVD+R or DVD+RW Disk into your DVD Burner
3. Open up the Nero SmartStart
4. Click "Cancel" button to close out the "New Compilation" window when it pops up
5. Click on "Recorder" > "Choose Recorder".
6. Select your DVD Burner
7. Then click on "Options", then on "Book Type Settings", set to "Automatic" and click "OK"
8. Now whenever you use Nero to burn DVD+R Media, it will automatically change the BookType or BitSet it to DVD-ROM




your sig still needs to change.