what is the problem here? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <_NEC DVD_RW ND-3551A> Version: 2.01 - HA 1 TA 2 - 7.5.7.0 Adapter driver: <USB 1.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <MATSHITA DVD-ROM SR-8586 >Version: 3H14 - HA 1 TA 0 - 7.5.7.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y040P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-ROM SR-8586 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : FQ2133N MKW603K 2.0B amvyo508 Port 2 ID 0 DMA: Off === CDRom-Device-Map === MATSHITA DVD-ROM SR-8586 D: CDRom0 _NEC DVD_RW ND-3551A E: CDRom2 FQ2133N MKW603K F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte BUFE : 0 Physical memory : 127MB (130544kB) Free physical memory: 24MB (25016kB) Memory in use : 80 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2007 CueSheet 12:48:24 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 12:48:24 PM #2 Text 0 File Burncd.cpp, Line 3133 _NEC DVD_RW ND-3551A Buffer underrun protection activated 12:48:24 PM #3 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using CD-R/RW media 12:48:25 PM #4 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 359342 ( 79:53.17) 12:48:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO (enabled: CD) 12:48:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: _NEC DVD_RW ND-3551A; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 12:48:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:48:25 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 300 (300) = #300/0:4.0 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 300 blocks [Main] 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 358893 (358893) = #358893/79:45.18 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 358893 blocks [Main] -------------------------------------------------------------- 12:48:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [_NEC DVD_RW ND-3551A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: Idx 0 Idx 1 Next Trk 1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1058400, ISRC "" 2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1058400 1411200 845527536, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 300 | -150 | 0x00 0 | 1 | 1 | 0x41 | 300 | 0 | 0x00 300 | 2 | 0 | 0x41 | 358893 | 300 | 0x00 450 | 2 | 1 | 0x41 | 358893 | 450 | 0x00 359343 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 12:48:25 PM #10 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:48:25 PM #11 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 12:48:25 PM #12 Text 0 File Burncd.cpp, Line 4262 Cache writing successful. 12:48:25 PM #13 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 12:48:25 PM #14 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 24x (3,600 KB/s) 12:48:25 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:48:25 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450 12:48:25 PM #17 Text 0 File MMC.cpp, Line 17511 StartDAO : CD-Text - Off 12:48:25 PM #18 Text 0 File MMC.cpp, Line 22124 Set BUFE: Buffer underrun protection -> ON 12:48:25 PM #19 Text 0 File MMC.cpp, Line 17739 CueData, Len=48 41 00 00 34 00 00 00 00 41 01 00 21 00 00 00 00 41 01 01 21 00 00 02 00 41 02 00 21 00 00 06 00 41 02 01 21 00 00 08 00 41 aa 01 34 00 4f 35 12 12:57:29 PM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 293 E: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 03 45 EA 00 00 1B 00 00 00 Sense Area: 0x70 00 03 00 03 43 4F 0A 00 00 00 00 0C Buffer x06488a00: Len xf810 0x00 FF FF FF FF FF FF FF FF FF FF 00 47 42 06 02 0x01 01 62 0F 01 01 62 0F 00 00 01 BA 21 3B E9 A4 0xAB 80 2B 23 00 00 01 E0 09 02 FF FF FF FF FF 60 12:57:29 PM #21 CDR -1135 File Writer.cpp, Line 278 Write error E: _NEC DVD_RW ND-3551A 12:57:30 PM #22 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 24x (3,600 KB/s) 12:57:30 PM #23 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 12:57:30 PM #24 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 11:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 11:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
update your firmware to the latest version, 2.02 found here: http://forum.rpc1.org/dl_firmware.php?download_id=2249 turn on your DMA, here's how: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues using too much memory.... no multi tasking, going on the internet, and try to shut down unnecessary programs while burning. writing too close to the edge of the disk! too much info on there ....... delete some! this is a Roxio,Sonic driver that may interfere with burning! delete Roxio/Sonic and Nero might work. just some stuff I found here.