Wii Firmware Updates, Wii and WiiKey Resources
#1201
27 Mar 2008 @ 13:41
yondas
Send private message to this user
Newbie
I try to update to the 1.9g ant to the 1.9s but both had an errer after the cycle test and appered ERROR test failed check your connections and try again , any one know what I can do to do the update correctly ?, (my wii is a 3.1u US , and my wiikey never been updating
#1202
27 Mar 2008 @ 13:46
@Kerman
lol ^^'' i guess i can say that same thing about that. i couldnt find out how he did it either. but hmm... try reading this other forum since there were other people discussing it and i think they found an answer
Click Here
lol ^^'' i guess i can say that same thing about that. i couldnt find out how he did it either. but hmm... try reading this other forum since there were other people discussing it and i think they found an answer
Click Here
#1203
27 Mar 2008 @ 13:52
Kerman
Account closed as per user's own request
Originally posted by HunterX5:I've posted there, no sucsess, or replies. I guess ill just need a new wiikey... imgonna keep on trying...
@Kerman
lol ^^'' i guess i can say that same thing about that. i couldnt find out how he did it either. but hmm... try reading this other forum since there were other people discussing it and i think they found an answer
Click Here
YO
#1204
27 Mar 2008 @ 14:09
Originally posted by Kerman:alright cool. im still learning how to completely fix the "corrupt wiikey" problem also.. since the way i did it doesnt work for everyone. but im sure someone on this forum found out how to do it but i guess i didnt see it yet. but if you try everything possible and it still fails, then your wiikey is in a state of suspension that is unfixable and youll probably have to get a new one. but lets see! you should be able to fix it. ill help if i find anything out
Originally posted by HunterX5:I've posted there, no sucsess, or replies. I guess ill just need a new wiikey... imgonna keep on trying...
@Kerman
lol ^^'' i guess i can say that same thing about that. i couldnt find out how he did it either. but hmm... try reading this other forum since there were other people discussing it and i think they found an answer
Click Here
#1205
27 Mar 2008 @ 14:29
Originally posted by rafadawn:I can't use the config disc without GCOS [ing] it. But does this mean I have to have a GC controller? I can't access anything with the wii remote.
A GCOS Wikkey config disc is used when, because of a firmware update, the Wii, although modded, is not able to read a normal Wiikey Config disc (the ones from the official Wiikey site).
In that instance, we use the GCOS Config disc (look at the link under Resources in firs post) so that we can access the config screen and turn ON the Region Override of the Wiikey. After this is done the Wiikey will be back to normal.
Originally posted by wiigame:
What is a GCOS disc?
#1206
27 Mar 2008 @ 15:18
cherrin
Junior Member
Yes, you will need a gamecube controller for the GCOS disk. The regular config disks work using either a gamecube controller or the reset button on the Wii itself, but the GCOS versions require a gamecube controller.
#1207
27 Mar 2008 @ 17:56
Will the 1.3 config discs still work on the new firmware? I'm having trouble getting a 1.4 config disc to work, both my GCOS and non-GCOS versions don't. The GCOS version shows up in the channel but when I start it up, the console just resets itself. The non-GCOS version doesn't get read by the wii. However, my GCOS 1.3 disc is working fine. Any ideas?
edit: I've already successfully updated to 1.9s
edit: I've already successfully updated to 1.9s
This message has been edited since its posting. Latest edit was made on 27 Mar 2008 @ 17:57
#1208
27 Mar 2008 @ 18:14
I'm having some issues with the 1.9S padded update, It goes through the testing and says SUCCESS! PRESS ANY KEY. However, no matter what I press, it stays on that line and doesn't do the actual update.
My 1.4 config disc padded doesn't work since it's not updated.
I did the Padded Update US burned with IMGBURN at 2x on DVD-R.
Any Ideas what's up?
THANKS FOR ALL THE HELP OVER THE YEARS THIS IS ONE OF THE MOST HELPFUL FORUMS EVER!
My 1.4 config disc padded doesn't work since it's not updated.
I did the Padded Update US burned with IMGBURN at 2x on DVD-R.
Any Ideas what's up?
THANKS FOR ALL THE HELP OVER THE YEARS THIS IS ONE OF THE MOST HELPFUL FORUMS EVER!
#1209
27 Mar 2008 @ 18:21
juniR
Suspended due non-functional email address
Originally posted by ruffride:Did you press the reset button on the Wii?
However, no matter what I press, it stays on that line and doesn't do the actual update.
Wii 3.2E w/ Wiikey 1.9s :: PSP 3.90 M33-3 :: NDS w/ R4DS :: Nokia N95
#1210
27 Mar 2008 @ 18:31
Did you press the reset button on the Wii?
Yes I did, I also tried the GameCube Controller, it still stays on Press Any Key
Yes I did, I also tried the GameCube Controller, it still stays on Press Any Key
#1211
27 Mar 2008 @ 18:37
Downloaded the update opened it with winrar didnt even filechop it burned it with imgburn on x2 speed using cheap fujifilm dvdrw and everything worked fine, been playing ssb for the last few days. Is the new config disk necessary if you have everything working and if so what benefits do you get form using it?
#1212
27 Mar 2008 @ 18:40
Originally posted by ruffride:if you tried putting the gamecube controller in or turn it on (if youre using a wireless controller) while youre in the update or config disc, there are some people that it wont work that way. you have to have the gamecube controller in and/or turned on while youre on the wii menu
Did you press the reset button on the Wii?
Yes I did, I also tried the GameCube Controller, it still stays on Press Any Key
This message has been edited since its posting. Latest edit was made on 27 Mar 2008 @ 18:41
#1213
27 Mar 2008 @ 18:47
The Gamecube controller is in Port 1. I put the disc in and turn the Wii on, then select the GameCube Channel and the disc runs right.
I do not have wireless.
Does it need to be an Nintendo Controller I'm using the Air Speed Controller it works fine on all the other games. And I was able to do the 1.9g update no problem.
I do not have wireless.
Does it need to be an Nintendo Controller I'm using the Air Speed Controller it works fine on all the other games. And I was able to do the 1.9g update no problem.
#1214
27 Mar 2008 @ 21:16
Hi.
I have updated my wiikey to 1.9s and my retail brawl now does read. But it is asking me to update. I had a fake version of japanese brawl bore that and did the 20% cut off power trick and it worked with no duplicated channels.
So what should I do now? I have a Australian PAL console. Should I run the hole update? (my wii is the latest firmware (we just got a update for wiiware coming soon)) or should I do the 20% trick again? or should I just start it and end it right away as my console already has the dual layer update software from the Japaneses version?
Please tell me asap as I am dieing here :D
I have updated my wiikey to 1.9s and my retail brawl now does read. But it is asking me to update. I had a fake version of japanese brawl bore that and did the 20% cut off power trick and it worked with no duplicated channels.
So what should I do now? I have a Australian PAL console. Should I run the hole update? (my wii is the latest firmware (we just got a update for wiiware coming soon)) or should I do the 20% trick again? or should I just start it and end it right away as my console already has the dual layer update software from the Japaneses version?
Please tell me asap as I am dieing here :D
#1215
27 Mar 2008 @ 21:18
rafadawn
Senior Member
Run the update. (PAL --> PAL = OK!)
Originally posted by jokenno14:
Hi.
I have updated my wiikey to 1.9s and my retail brawl now does read. But it is asking me to update. I had a fake version of japanese brawl bore that and did the 20% cut off power trick and it worked with no duplicated channels.
So what should I do now? I have a Australian PAL console. Should I run the hole update? (my wii is the latest firmware (we just got a update for wiiware coming soon)) or should I do the 20% trick again? or should I just start it and end it right away as my console already has the dual layer update software from the Japaneses version?
Please tell me asap as I am dieing here :D
This message has been edited since its posting. Latest edit was made on 27 Mar 2008 @ 21:18
Where's the party?!?
#1216
27 Mar 2008 @ 21:23
Oh no! its NTSC-U import of brawl retail :D
Australia does not even have a release date for brawl yet :D
what should I do!
Australia does not even have a release date for brawl yet :D
what should I do!
#1218
27 Mar 2008 @ 21:26
Originally posted by Kerman:I will wait if you will wait..
Wait for the PAL!!! or turn on region overide
and I can read the game! But its asking me to update! (and its a American game so American firmware and I have a PAL console! go away!
what should I do rafadawn?
#1219
27 Mar 2008 @ 21:28
Kerman
Account closed as per user's own request
you should get the 1.4 config disc and turn on dev mode to block updates from imported games
YO
#1220
27 Mar 2008 @ 21:31
Originally posted by Kerman:
you should get the 1.4 config disc and turn on dev mode to block updates from imported games
No offense but I am going to wait for rafadawn's reply.
#1221
27 Mar 2008 @ 22:11
lol it would seem rafadawn is the most trusted person on this forum. but its cool and believable tho
@Kerman
by the way. dev mode isnt what blocks updates. it is a separate option on the config disc
@Kerman
by the way. dev mode isnt what blocks updates. it is a separate option on the config disc
This message has been edited since its posting. Latest edit was made on 27 Mar 2008 @ 22:13
#1222
27 Mar 2008 @ 22:36
"by the way. dev mode isnt what blocks updates. it is a separate option on the config disc"
In theory that would be correct. But I know at least with the beta release of 1.9s, the resellers had to turn both dev mode and block updates on for it to work. I'd like to test it myself but all I have is a 3.2u Wii with nothing that would be high enough to install an update. Possibly could go edit the TDM file to say the disk requires a higher level and see if that would get an update screen, but not certain.
In theory that would be correct. But I know at least with the beta release of 1.9s, the resellers had to turn both dev mode and block updates on for it to work. I'd like to test it myself but all I have is a 3.2u Wii with nothing that would be high enough to install an update. Possibly could go edit the TDM file to say the disk requires a higher level and see if that would get an update screen, but not certain.
#1223
27 Mar 2008 @ 22:41
Originally posted by duo22:i guess that is true. but this isnt the beta release this is the full release so you wouldnt need to turn both dev mode and the block update option on for it to work
"by the way. dev mode isnt what blocks updates. it is a separate option on the config disc"
In theory that would be correct. But I know at least with the beta release of 1.9s, the resellers had to turn both dev mode and block updates on for it to work. I'd like to test it myself but all I have is a 3.2u Wii with nothing that would be high enough to install an update. Possibly could go edit the TDM file to say the disk requires a higher level and see if that would get an update screen, but not certain.
#1224
28 Mar 2008 @ 0:41
Kermon im in the same boat. I used 4 types media and padded none
padded slow burn fast burn Nero IMgburn CDclone Nothing worked. It was costing me more buying new
media so i order a new wiikey its only 17.00 + 9.00 for shipping.
I also did the long wire install so that heped already.
padded slow burn fast burn Nero IMgburn CDclone Nothing worked. It was costing me more buying new
media so i order a new wiikey its only 17.00 + 9.00 for shipping.
I also did the long wire install so that heped already.
#1225
28 Mar 2008 @ 1:00
I'm glad to see that the Wiikey team didn't abandon us hehe.
I have a few questions I hope u guys can help me.
(My wii = 3.1U)
- Can I do this 1.9s update without having a game cube controller? Cause I don't have one...
- Does this update corrects the problem we were having in 1.9g, that when we tried to run some backups it said "unable to read disc"?
- Do backups of SSBB (ntsc) work without this update?
Thanks.
I have a few questions I hope u guys can help me.
(My wii = 3.1U)
- Can I do this 1.9s update without having a game cube controller? Cause I don't have one...
- Does this update corrects the problem we were having in 1.9g, that when we tried to run some backups it said "unable to read disc"?
- Do backups of SSBB (ntsc) work without this update?
Thanks.
This message has been edited since its posting. Latest edit was made on 28 Mar 2008 @ 1:10
Share this
