Where do I find the serial number for Roxio? Ya never know when I might want it again in the future.

opiate691,

Let's remove the email addy from your sig, it's not allowed here. You also might want to read the forum rules you agreed to.


Beatles74,

You need to read the forum rules too. Discussing or asking for cracks, hacks, serials or keygens will get you banned real quick.

@Neph

I think he already has Roxio and wants to uninstall it as per Binkie's instructions. He wants to know where in Roxio is the serial number so he can save it in case he wants to reinstalls it, much like Nero reinstalls. I can't find it in my install but I do have the original cd with key on it.

Oh, shoot. I hate it when I do that.


Beatles74,

I owe you a public apology so please accept my humble apologies. I do this every so often when I get swamped and try to rush through things. You now have one "Neph Owes Me A Favor" card to use at you leisure :)

@ Neph

I love the new killer sig. I would like one like that without the moderator title cause I couldn't harness my enthusiasm for banning some of these mental pigmies.

Yeah, I have Roxio. I just want to find the serial # in my registry.

Apology accepted Neph. I'll take you up on that offer. Where is the serial # for Roxio located in my registry? :o)

Beatles74

I looked thru my EZCD Creator7.1 and I could find no place where my key serial number was listed. Do you have the install disc and or box? If I were you I would leave it on your pc. If you have Nero InCD installed, I would get rid of that. Just don't have any Roxio or Nero start up at boot and they should not interfere with one another. Had both for three years,no problems. If you were not having anyproblems before this latest one and had both installed then it's probably something else. Listen, if Binkie can't find a solution, there might not be one.

Yeah I agree w/ garmoon. If you've had it installed for awhile then you may not need to install it.
It's usually the packet writing part that causes the conflict - just like Nero's InCD.

You might find the serial in regedit. Go to start>run. Type in regedit.
Then click on HKEY_LOCAL_MACHINE. Under Software look for Roxio. One of the folder under Roxio I would think would have the serial #.

@garmoon
Does Roxio list is as a separate app in add/remove programs like Nero does w/ InCD?

@binkie

No Roxio doesn't give any option in "add/remove" other than uninstalling the whole suite. For the life of me, I can't find anywhere an activation key number might be. In the about roxio pull down they give the tech support id #, but not the install #. I don't prowl in the registry.

Ok, I finally found the time to try and burn a dvd. I did a disk clean up. I upgraded the firmware but I left Roxio alone for now. I'll have to find the time to compare Roxio's and Nero's features. I'm pretty sure there's something about Roxio that I liked better than Nero, or maybe there was something Roxio had that Nero didn't. Anyway, I tried to burn a dvd and IT WORKED!!!! Yay!!!

I hope it stays that way. I think the problem was the firmware. I downloaded it but forgot to run it the last time the burning failed.

I took back that other external burner by the way.

Thanks for all the help, y'all.

Glad you and binkie got it sorted. The only reason I still use roxio is for the sound editor program there. I've used it for years and I know how it works. Especially the recording feature which I use to get analog music to digital format.

What exactly can you do with the sound editor from Roxio? I was using Nero's Wave Editor before Nero decided I don't need it anymore. My ex-gf said she doesn't have the serial number on her PC anymore (yeah right) so I guess I'll have to use the free Audacity or something else. Can you edit songs with the Roxio one? What I like to do is cut off the 1 or 2 seconds of silence before a song or the 6-8 seconds after a song. I also like to fade in and out live tracks. Or, just turn the volume up on a song that has very low volume (mostly from early CDs from the 80s).

You can do all of that and more. You can splice 2 mp3s together, or insert a splice into an mp3. Nifty program. Change volume or say fade out the end of a live tune when applause starts. Change pitch (key signature).

Ok, I've been burning dvds for the last week. Sometimes it worked and sometimes it failed. Usually, it seemed to be if I lowered the speed, it would work fine. Well, last night I tried 3 times and it failed. Before I get rid of Roxio, I figured I'd post the error report and see what y'all have to say one more time.

Hey Beatles74
Have the new log to post?

I'm thinking you're probably still getting the power calibration error.

Another thing to try to is to clean the lens of the drive. Either use a dvd lens cleaner or try blowing some canned air in there.

Other options are trying the drive on the slave connection (just be sure to change the jumper pin on the back of the drive to slave).
And/or try other power connector off of the power supply.

Oh geez, I forgot to post the report. It was because I'm still a newbie. It wouldn't let me so I was waiting and I forgot.



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <PLEXTOR DVDR PX-716A> Version: 1.10 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLP AS40.0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 47MB (48920kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.3.2007
NeroAPI
9:44:59 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

9:44:59 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

9:44:59 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

9:45:04 AM #4 Text 0 File Reader.cpp, Line 127
Reader running

9:45:04 AM #5 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

9:45:04 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:45:04 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

9:45:05 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

9:45:05 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

9:45:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

9:45:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

9:45:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

9:45:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:45:05 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

9:45:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

9:45:11 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

9:45:12 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

9:45:12 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

9:45:12 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

9:45:12 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:45:12 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

9:45:12 AM #22 Text 0 File DVDR.cpp, Line 5659
Drive: PLEXTOR DVDR PX-716A
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

9:45:12 AM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM

9:45:12 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

9:45:48 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
09:45:48.154 - PLEXTOR DVDR PX-716A\H1 T0 : Queue again later

9:46:08 AM #26 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01EE4C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

9:46:08 AM #27 SCSI -1066 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

9:46:08 AM #28 CDR -1106 File Writer.cpp, Line 311
Power calibration error
PLEXTOR DVDR PX-716A\H1 T0

9:46:08 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:46:08 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:46:08 AM #31 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

9:46:08 AM #32 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

9:46:08 AM #33 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

9:46:08 AM #34 Text 0 File DVDR.cpp, Line 5659
Drive: PLEXTOR DVDR PX-716A
Book Type request [PX]: DVD+R
Changing the Book Type was finished successfully, return code 0

9:46:08 AM #35 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

9:46:09 AM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:46:09 AM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.1.158, size=23420 bytes, created 9/1/2003 6:17:24 PM
File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 11:54:28 AM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Yep still the same error and a lot of memory in use - 81%.

Besides the suggestions in my post above may be time to try uninstalling Roxio and run the zap tool. Hopefully you can find the serial # for it.

Another burning program you may want to try is ImgBurn.
Free and not any conflicts w/ other programs that I know of.

Use the build mode to add the movies files from Shrink.

Hi guys,
I have been reading through posts for the last couple of days but I've had to come out and ask for some more help....

I too am having issues with DVD Shrink and Nero autoburn. I have backed up several movies in the past with no problem, then one day Nero just fell over and wouldn't burn. I checked the version of Nero and it was indeed a later version, so I uninstalled it. (I'm confused as to how it burnt multiple dvds with no problem in the past, because from what I've read DVD Shrink and Nero-post-version-6.6.0.18 don't get along).

I have re-installed the old version (6.6.0.18) after running the cleantool, but I am still getting the Burn failure error. I have even uninstalled and re-installed DVD Shrink but I'm still having no luck. Usually I would try and figure all this out for myself, but it's at the stage where it's really driving me crazy! Below is the log after the fail.

Any help would be greatly appreciated.... Thanks heaps guys.




Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20 AM
ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: E:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0D - HA 1 TA 2 - 6.6.0.18
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-55GVA0 08.0 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1200JB-00CRA1 17.0 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SHM-165H6SHS0D nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : IOMEGA ZIP 250 51.G nvidesm Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SHM-165H6S D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 157MB (161284kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.3.2007
NeroAPI
1:12:06 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

1:12:06 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

1:12:06 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

1:12:06 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

1:12:06 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:12:06 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHM-165H6S running

1:12:06 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:12:06 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:12:06 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

1:12:40 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2279103 (506:28.03, 4451MB)

1:12:40 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

1:12:40 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

1:12:40 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL.)

1:12:40 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2279104 (2279104) = #2279104/506:28.4
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2279104 blocks [LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------

1:12:40 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4667604992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2279104 | lead-out | 1 | 0x41 | 0x00

1:12:41 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

1:12:41 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

1:12:41 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

1:12:41 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)

1:12:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:12:41 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

1:12:41 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

1:12:41 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

1:12:41 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1:13:04 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 2, LUN 0, buffer 0x00C60000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

1:13:09 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
13:13:09.171 - LITE-ON DVDRW SHM-165H6S\H1 T2 : Queue again later

1:13:10 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 2, LUN 0, buffer 0x0D821400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00

1:13:10 PM #28 CDR -1076 File Writer.cpp, Line 311
Disc changed

1:13:10 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:13:10 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

1:13:11 PM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

1:13:11 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)

1:13:11 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1:13:11 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 9:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 3/01/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Just an update: I still haven't had any success with burning from Shrink/Nero so I tried ImgBurn and so far it's working fine. I hate that I have to go through one more long ass step but at least I'm burning again. I can't wait till I get a new PC.

Hey, Greety, I suggest trying out Imgburn. Basically, use the previous method of Decryptor then Shrink (if you need to) then use Imgburn. Honestly, I didn't find the guides on their site too helpful. They seemed to be written for people who are familiar with burning, which fortunately I am. I like my hand held on guides. I want to be treated as a foreign exchange student who can't speak English. When I first started burning last year, I had no clue what to do and the Shrink guide was very helpful. It told you everything, step by step, in plain English and did a very good job of explaining. Even though I am familiar with burning (from using Shrink only) I still had to figure out what to do with Imgburn on my own. They helped, but they weren't explained well in my opinion. Anyway, give that a try if nothing else works.

I haven't gotten rid of Roxio yet since I'd like to try out their wave editing program, which I haven't had time to do yet. If I'm not satisfied, I'll get rid of Roxio and give Shrink a try again. If anything, I have Audacity, which is ok. I'd still have to get used to the feel of it.

Ok, I'm rambling. I'm outta here like water heater.

Hi greety
Here's a few more suggestions for you.

Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0D
Update the firmware - the latest is HSOE.

DiskPeripheral : WDC WD2000JB-55GVA0 08.0 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1200JB-00CRA1 17.0 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SHM-165H6SHS0D nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : IOMEGA ZIP 250 51.G nvidesm Port 0 ID 1 DMA: Off
Check and make sure DMA is on for all drives. Nero doesn't report drives connected by anything other than ide correctly so this may not be a problem.
Here's a guide to get you in the right direction - link.

Burn process failed at 16x
Take it down to 8x.

Keep us posted - good, bad or otherwise.


Hey Beatles74
Good to hear you're having some success!
Yeah the guides at ImgBurn are quite lengthy.

You can set Shrink to autoburn w/ ImgBurn - just need to download a tweak for Shrink. Here's a link.

I know this isn't the right section for this reply, but I just wanted to know if you guys know anything about the VIDEO_TS thing with VobBlanker? I have DVDFAB Decrypter, DVD FIXVTS, Nero, DVD Shrink, & IMG Burn. I can not figure out when I get done with DVDFAB what else needs to be done to burn a copy of a movie. The VobBlanker isn't finding what DVDFAB Decrypted.

@AgentBlaq
After you rip w/ DVDFab you might not need to run it thru VobBlanker. But only takes maybe 5 mins so can't hurt.
You need to open the ifo file on the video_ts folder.

Here's a guide for DVDFab, VobBlanker & Shrink - will give you details on how to use VobBlanker. link

ok guys, I know there is probably a real easy solution to this problem, but I am currently stumped.

I had to load all my backup software on a new machine and now I am having issues with autoburn in my shrink.

I am using DVD Shrink 3.2.0.15
ripit4me 1.7.1.0
and decrypter 3.5.4.0
nero oem suit 6.3.1.11

on my old machine, I never had a problem but on my new one I can't get autoburn to work.

The only other issue I can guess at is that my new machine was preloaded with sonic.

Any Ideas?

To Go Back To Nero 6.6.0.18

Write down your Nero serial# and then uninstall version 6.6.1.4 from your system using the general cleantool found here:

http://ww2.nero.com/nero6/enu/General_CleanTool.html

After using the clean tool you might want to use a registry cleaner like ccleaner which is free here:

http://www.ccleaner.com/download/downloadpage.aspx?1

Then defrag your HDD

Next, download and install version 6.6.0.18 from the links provided, re-enter the serial# and you're good to go.

nero version 6.6.0.18 updates:
Package 1
http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe

Package 2
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe

Do NOT install InCD just the 2 above packages.

New Links
Package 1:
http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
Package 2:
http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

Now you should be able to autoburn with Nero