Originally posted by btfan:

---

Originally posted by Jerry746:

---

Originally posted by btfan:

---

Hey, I was wondering, how do the people from, for example, KeyMaster know exactly what letter or number changed?

---

With the proper equipment--program and a good PC you can read the key numbers that the sat providers are sending down in the encryption stream with the signal.

Jerry

---

I mean how do they know what letter or number they have to change?

---

The software program reads the NEW numbers in the signal. All that is needed is to compare the NEW to the OLD and see if just 1 digit/letter changed or the complete sequence. This sort of has to do with re-programing CARDS but the keys are also needed for FTA receivers. This is a short version explanation but should give you the basic idea.

Jerry

Jerry

the links that i have tried here for the keystarter says that the file is deleted could some help please

hey jerry im also new to keymaster i finally found it could you tell me how to run it is there something that i have to push to find the new keys

Open keymaster - it will show 1,2,3 and 4.
Select any #.
The nwait for the screen to change and you will see 'Retrieve Keys' or something similiar.
Click on that and wait for keys to be retrived.

Right now it doesn't work well because with everyone trying to retrieve at the same time, overloads everything and you end up with page cannot be displayed. The only downfall of this program.

Great when it works. Just keep trying every 5 minutes if this happens. Eventually you'll hit a gap when it's less active and you'll get in.

Good Luck

I input the new keys,but my coolsat5000 is still scrambled

I finally got mine to work - here's the code.

Keymaster
----------------------------------------
DN and Bev Keys Feed
Nag2 keys
----------------------------------------
Dish Provider 0101: Last Updated (16 Aug '07 4:00 PM EST)

Key 0: BF 0D 6F DA DB 69 4D 31 F5 70 2B 40 A8 F8 28 03 (Active)

Key 1: 63 75 F2 E9 83 31 B5 6F 33 60 5B 1F 36 2D 48 7D

Bev Provider 0901: Last Updated (16 Aug '07 3:16 PM EST)

Key 0: D5 D2 91 84 05 4E B6 18 C5 B7 2D E1 7C BE A0 67

key 1: 4B 1F B2 B8 78 F0 74 CE 9A D1 E0 9E CA 09 41 40 (Active)


Wed, 15 Aug 2007 19:47:51 CDT

Did you turn off the autoroll

the dish keys you displayed I have input in my box but,is still scrambled despite autoroll being turned off

never mind MY pic is back, sorryfor the inconvenience

The only change in the code was in the line (96) or line 20 in the expressvu screen.

The 1st 2 characters were changed.

0E was changed to 4B - everything else was the same.

No problem - I have 2 boxes setup.

1 box can on in 20 seconds, the other took about 10-12 minutes.
Don't know why.

expressvu was changed again.

Bell ExpressVu (0901)

(Last Update: Thu. Aug 16, 2007 7:08 PM EST)

86: 5E 11 CE 7A 0F 82 8D DC 58 E6 27 F6 4B 49 92 CD

96: 4B 1F B2 B8 78 F0 74 CE 9A D1 E0 9E CA 09 41 40

Entire 86 line is new.

Hello Jerry - You have anymore info on the how-to's on retrieving new codes?

I'd be interested in learning more and getting setup to do it myself.

thx breck68 been searching for hours first ones that worked

Not sure how long they will last. I changed mine at 6pm and by 7pm, they hit me again.

Originally posted by chuy79:

---

never mind MY pic is back, sorryfor the inconvenience

---

they are working better than before which was nothing thx again

do you have new key for viewset ultra. this is my first time here, but I have seen you many times through google.

breck68 Your key worked very well, thank you for the information

Here's a program I came across that works better than the keymaster4.0

Enjoy!!!

Download Here: http://www.stuffupforgrab.com/downloads/Satellite_Key_Codes.exe

For complete package: http://www.stuffupforgrab.com/downloads/Key-Grabber.zip

You'll need winrar or similiar to unzip.

http://www.rarlab.com/rar/wrar370.exe

hey guys i'm a newbie to this stuff, but i managed to get my Viewsat xtreme connected and up and running, my question is:
is there a bin i can load that will allow the viewsat to pick up the keys ...ie: autoroll, at the moment i'm having to manually input the keys, and recently it seems like they are rolling them pretty damn often!

any help is much appreciated!

And Jerry, thanks for the great info in this thread, been getting the keys from that like you posted! very helpful!

hi sharkster
i have the same receiver.they have autoroll programs but they seem to be going down just as quick. found one this morning and it is zapped already. will let you know if i find one that keeps working.

hey fishhead6, thanks will keep an eye out here for an update then!
thanks again!

Hi All,

I have only had my Satellite for less then a week (Viewsat Ultra). When I go under NAGRA I have four different BEV option 080100 090100 090500 and 080500.... and under each BEV option I have four Lines of Keys:

08
09
88
89

Which Lines do I put the keys in? I have input keys into all four BEV and key 86 or(00) into 08 and 88 and 96 (01) into 09 and 89.
I have turned off "auto roll" but its still not working. Do I need to upload new file into my reciever. I have the 070801 file currently installed. If I havent explained it well then i appologise. Please help!!

Hansi.

Newby here, just got this cs8100 box, i entered the keys but nothing is showing up

The keys for D*sh work fine, I think I noticed on my nagra table
i have
000801 01 Keys XXXXXXXX
000801 11 Keys XXXXXXXX
000901 01 Keys XXXXXXXX
000901 11 Keys XXXXXXXX

I see here people mentioning 86 and 96, Do i have the wrong nagra set up for BEV, If feedback or any help on my setings, Thanks in advance.