i have a problem with my Asus DRW - 1608P3S . I am trying to burn dvd's and the burning goes until it should end.. then when the proccess is 100% a pop`up window come to front and telling me that The process has been started and then everything fails. And i am looking at the error and it says that "could not perform disc at once" .. i did few dvd's and the error did not occure but after i discared the dvd and put it back in the ROM and trying to read the dvd it says that G:/ is not accessible .incorect function i hate this problem.. i hope you could help me with something.. i was thinking to format the primary partition.. what do you think.. thanks a lot Have you tried checking your basics ? what do you mean ? Have you flashed your Firmware ? latest one 1.24 Do you have a working ASPI layer ? yes i took it from ahead Nero site. When was your last Disk Defrag ? today What is your burner's IDE location ? i'm not sure what this means i mean does it refear to the way dvd rw is pluged tot the hard drive? :-? What are your burner's Jumper settings ? master (and i have an asus cd-rw on slave) What type of media are you using ? imation +R What programs are you using ? nero 6.0.0.9 (now it is updated to 6.6.1.15a) Exactly where are you and what are you doing when your error occurs. it apperd when i was burning a dvd with my movies (data dvd) What are your PC's specs ? AMD Athlon(TM)XP 1800+ 1.15 GHz , 512 MB or RAM Do you have any Roxio products installed on your PC ? not at all Are you running in PIO or DMA transfer mode ? DMA (it says both primary IDE and secondly IDE there.. DMA if possible and somethuing about ultra DMA mode 2) the error: odin odinX Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM Nero version: 6.0.0.9 Recorder: <ASUS DRW-1608P3S> Version: 1.24 - HA 0 TA 1 - 6.0.0.9 Adapter driver: <atapi> HA 0 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.0.0.9 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS DRW-1608P3S atapi Port 0 ID 1 DMA: On CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 197MB (202520kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.5.2007 ISO compilation 10:44:16 PM #1 Text 0 File Isodoc.cpp, Line 5748 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:44:16 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 10:44:16 PM #3 Text 0 File Writer.cpp, Line 127 Writer ASUS DRW-1608P3S running 10:44:16 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3854 First writeable address = 0 (0x00000000) 10:44:16 PM #5 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 10:44:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2295103 (510:01.28) Last address to be written: 2137887 (475:05.12) 10:44:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 10:44:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: ASUS DRW-1608P3S, Media type: DVD+R Disc Manufacturer ID: DAXON, Media Type ID: AZ3, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 10:44:20 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 768 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 608 (608) = #608/0:8.8 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [ASUS DRW-1608P3S ] -------------------------------------------------------------- 10:44:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 937 Prepare recorder [ASUS DRW-1608P3S ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1552384, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 2137130 | lead-in | 0 | 0x00 | 0x41 2137130 | 2 | 0 | 0x00 | 0x41 2137280 | 2 | 1 | 0x00 | 0x41 2137888 | lead-out | 1 | 0x00 | 0x41 10:44:20 PM #11 Phase 24 File dlgbrnst.cpp, Line 1843 Caching of files started 10:44:20 PM #12 Phase 25 File dlgbrnst.cpp, Line 1843 Caching of files completed 10:44:20 PM #13 Phase 36 File dlgbrnst.cpp, Line 1843 Burn process started at 16.1x (22,218 KB/s) 10:44:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #2137280 10:44:20 PM #15 Text 0 File Cdrdrv.cpp, Line 7906 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 07 44 41 58 4F 4E 00 - 00 00 41 5A 33 00 38 23 ..DAXON...AZ3.8# 54 37 14 00 23 6F 00 7D - 6A 17 19 0C 0C 0A 0B 01 T7..#o.}j....... 19 1B 0B 0B 0E 0F 01 00 - 00 00 00 00 00 00 00 01 ................ 10:44:20 PM #16 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:54,932 (54932ms) -> OK 10:44:20 PM #17 Text 0 File DVDPlusRW.cpp, Line 553 Start write address at LBA 2137280 DVD high compatibility mode: Yes 10:44:20 PM #18 Text 0 File WriterStatus.cpp, Line 113 <ASUS DRW-1608P3S > start writing Lead-Out at LBA 2137888 (209F20h), lenght 0 blocks 10:44:20 PM #19 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 10:44:50 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1205 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x24 0x00 10:44:50 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1205 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x72 0x03 10:44:50 PM #22 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 10:44:50 PM #23 CDR -1066 File ThreadedTransferInterface.cpp, Line 1620 Invalid field in command 10:44:50 PM #24 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1620 Could not perform end of Disc-at-once 10:44:50 PM #25 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 10:44:50 PM #26 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 10:44:50 PM #27 Phase 38 File dlgbrnst.cpp, Line 1843 Burn process failed at 16.1x (22,218 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 7:12:26 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ______________________________________________________________ DEFRAG: Volume (C Volume size = 9.92 GB Cluster size = 8 KB Used space = 7.83 GB Free space = 2.09 GB Percent free space = 21 % Volume fragmentation Total fragmentation = 9 % File fragmentation = 17 % Free space fragmentation = 1 % File fragmentation Total files = 39,610 Average file size = 169 KB Total fragmented files = 40 Total excess fragments = 5,671 Average fragments per file = 1.14 Pagefile fragmentation Pagefile size = 768 MB Total fragments = 642 Folder fragmentation Total folders = 2,821 Fragmented folders = 73 Excess folder fragments = 215 -------------------------------------------------------------- regards
This probably is the problem, Way too fast, best to burn at half of the rated media speed First i would try burning those disk at 8x, then 4x, if you still get burn errors try better media like verbatims or Taiyo Yuden
