I'm trying to burn DVD video files (.ifos, .vobs), but I've had the same error trying to burn just normal zips. Nero does lead-in, but never actually puts anything on disc, and then gives an error and stops after 21:56:56 #31 Phase 127 File dlgbrnst.cpp, Line 1730 Generating DVD high compatibility borders 21:57:12 #32 CDR -1135 File WriterStatus.cpp, Line 167 Write error D: HL-DT-ST DVD-RW GWA-4082N 21:57:12 #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once Full log: John Kwok Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CG02 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.2.3.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 1 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-RW GWA-4082N D: CDRom0 AXV CD/DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte BUFE : 0 Physical memory : 479MB (490864kB) Free physical memory: 24MB (24988kB) Memory in use : 94 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.5.2007 UDF/ISO compilation 21:56:24 #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 21:56:24 #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 21:56:24 #3 Text 0 File Isodoc.cpp, Line 6427 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:56:24 #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 21:56:24 #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 68608KB of Memory 21:56:24 #6 Text 0 File Reader.cpp, Line 124 Reader running 21:56:24 #7 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVD-RW GWA-4082N running 21:56:24 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 21:56:24 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 21:56:24 #10 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 21:56:25 #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2092463 (464:59.38, 4086MB) 21:56:25 #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 21:56:25 #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 21:56:25 #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:56:25 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2092464 (2092464) = #2092464/464:59.39 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2092464 blocks [D: HL-DT-ST DVD-RW GWA-4082N] -------------------------------------------------------------- 21:56:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4285366272, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2092464 | lead-out | 1 | 0x41 | 0x00 21:56:25 #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 21:56:25 #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 21:56:25 #19 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 21:56:25 #20 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 21:56:25 #21 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 21:56:25 #22 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 21:56:25 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:56:25 #24 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MBIPG101 Media type ID: R04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 21:56:25 #25 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: Yes 21:56:56 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 02 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 03 0E 0C Buffer x049f0000: Len x10000 0x00 00 01 BA 44 00 0F 27 C4 8F 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 0A FF FF FF FF FF FF FF FF FF 0xFF A4 DF 8B 2C 25 C2 31 BF 8E 80 40 05 01 00 0B 21:56:56 #27 CDR -1135 File Writer.cpp, Line 302 Write error D: HL-DT-ST DVD-RW GWA-4082N 21:56:56 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:56:56 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:56:56 #30 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C 21:56:56 #31 Phase 127 File dlgbrnst.cpp, Line 1730 Generating DVD high compatibility borders 21:57:12 #32 CDR -1135 File WriterStatus.cpp, Line 167 Write error D: HL-DT-ST DVD-RW GWA-4082N 21:57:12 #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 21:57:12 #34 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/8/2004 8:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) It worked fine even just like a day ago, I haven't touched any of the settings, but now it suddenly can't burn for some reason, same thing, errors after lead in. I've tried using both TDK +R and Verbatim -R, same thing happens. The memory usage is high, but that's just because Nero hasn't really left the caching phrase in the beginning where the CPU runs a lot, and goes immediately to the error. I've successfully burned many discs under loads many times heavier than what I have running during this burn log. I'd appreciate it if anyone could help me. Thanks a lot.
This version is full of bugs, uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install this version 7.5.9.0 from here http://www.filehippo.com/download_nero_7_premium/ Later versions of Nero are available. This is common with this verson of Nero
1st thing edit out the serial # - at the top of the log and begins w/ 1C. Don't need someone else using it. Yeah that memory usage is quite high. You're almost hitting virtual memory time. Update Nero to the latest - 7.9.6.0. Quite a few fixes and enhancements since the version you were running. Hopefully will take care of the resource issues. Anything else change pc wise? Keeping up on the pc maintenance bit - disc cleanup, defrag, virus scans? Try another burning program if the update doesn't do it. Here's a good free one - ImgBurn. Use the burn mode tor data or video_ts folder and burn.
OK I HAVE NOT TOUCHED MY SYSTEM FOR A WHILE AND I WAS USING NERO AND DVDSHRINK WITH NO PROBLEMS...NOW WHEN I TRY TO BURN SOME MOVIES I GET THIS ERROR AND NO MATTER WHAT I UPGRADE OR USE IT KEEPS DOING TO SAME THING. ANYONE KNOW HOW TO HELP? THIS IS WHAT I GOT... 1A2300067130120340417382 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero API version: 6.3.1.12 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 1 TA 1 - 6.3.1.12 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 _NEC DVD_RW ND-2510A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523268kB) Free physical memory: 266MB (273084kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2007 NeroAPI 2:01:35 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 2:01:35 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 2:01:35 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 2:01:35 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 2:01:35 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:01:35 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:01:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:01:36 PM #8 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 2:01:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1644159 (365:22.09, 3211MB) 2:01:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO 2:01:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 2:01:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:01:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1644160 (1644160) = #1644160/365:22.10 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1644160 blocks [_NEC DVD_RW ND-2510A ] -------------------------------------------------------------- 2:01:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3367239680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1644160 | lead-out | 1 | 0x00 | 0x41 2:01:36 PM #15 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 2:01:36 PM #16 Text 0 File Burncd.cpp, Line 4177 Cache writing successful. 2:01:36 PM #17 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 2:01:36 PM #18 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 2.4x (3,324 KB/s) 2:01:36 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:01:36 PM #20 Text 0 File DVDR.cpp, Line 1833 Recording mode: Sequential Recording Mode 2:01:36 PM #21 Text 0 File Mmc.cpp, Line 20173 Set BUFE: supported -> ON 2:01:36 PM #22 Text 0 File DVDR.cpp, Line 1974 Start write address at LBA 0 DVD high compatibility mode: Yes 2:01:36 PM #23 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:01:36 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x19 0x16 0x80 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 2:01:36 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1607 Illegal disc 2:01:36 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1607 Could not perform start of Disc-at-once 2:01:36 PM #27 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 2.4x (3,324 KB/s) 2:01:36 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 2:01:36 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi nagger Welcome to aD. Edit out your serial # - at the top of the log and begins w/ 1A. Then best bet is to start a new thread for your problem - gets a bit confusing looking at different members log in the same thread plus forum rules. You can copy & paste this log minus the serial # in a new thread. There's a few suggestions we can give like a firmware update that may help.
I just uninstalled my old copy of Nero, ran the clean tool, installed to the updated 7.9.6.0, but the problem persists. Same error as before, dies after generating DVD high compatibility border, error log is the same. Imgburn works fine though, Does anyone know what could be wrong with it? Thanks.
Hmmm can you post the new log from Nero? If you didn't save it Nero saves the last 10 burn logs here in a text file: program files>nero>nero 7>core>nerohistory. Since ImgBurn worked but Nero didn't I'm thinking a conflict somwhere. What's changed pc since this started happening w/ Nero?
Got it from the history file, thanks. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 13:54:32 NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CG02 - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.2.3.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 1 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD-RW GWA-4082N D: CDRom0 AXV CD/DVD-ROM E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte BUFE : 0 Physical memory : 479MB (490864kB) Free physical memory: 34MB (35616kB) Memory in use : 92 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.5.2007 UDF/ISO compilation 21:56:24 #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 21:56:24 #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 21:56:24 #3 Text 0 File Isodoc.cpp, Line 6427 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:56:24 #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 21:56:24 #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 68608KB of Memory 21:56:24 #6 Text 0 File Reader.cpp, Line 124 Reader running 21:56:24 #7 Text 0 File Writer.cpp, Line 113 Writer D: HL-DT-ST DVD-RW GWA-4082N running 21:56:24 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 21:56:24 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 21:56:24 #10 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 21:56:25 #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2092463 (464:59.38, 4086MB) 21:56:25 #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 21:56:25 #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 21:56:25 #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:56:25 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2092464 (2092464) = #2092464/464:59.39 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2092464 blocks [D: HL-DT-ST DVD-RW GWA-4082N] -------------------------------------------------------------- 21:56:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4285366272, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2092464 | lead-out | 1 | 0x41 | 0x00 21:56:25 #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 21:56:25 #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 21:56:25 #19 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 21:56:25 #20 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 21:56:25 #21 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 21:56:25 #22 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 21:56:25 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:56:25 #24 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MBIPG101 Media type ID: R04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 21:56:25 #25 Text 0 File DVDPlusRW.cpp, Line 650 Start write address at LBA 0 DVD high compatibility mode: Yes 21:56:56 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 02 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 03 0E 0C Buffer x049f0000: Len x10000 0x00 00 01 BA 44 00 0F 27 C4 8F 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 0A FF FF FF FF FF FF FF FF FF 0xFF A4 DF 8B 2C 25 C2 31 BF 8E 80 40 05 01 00 0B 21:56:56 #27 CDR -1135 File Writer.cpp, Line 302 Write error D: HL-DT-ST DVD-RW GWA-4082N 21:56:56 #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:56:56 #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:56:56 #30 SPTI -1135 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C 21:56:56 #31 Phase 127 File dlgbrnst.cpp, Line 1730 Generating DVD high compatibility borders 21:57:12 #32 CDR -1135 File WriterStatus.cpp, Line 167 Write error D: HL-DT-ST DVD-RW GWA-4082N 21:57:12 #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 21:57:12 #34 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/8/2004 8:00:00 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Nothing's changed before the error started. I haven't installed any programs or anything, it just popped up suddenly, that's why I'm so confused. Thanks.
Ok this last log still show 7.2.3.2 version of Nero - looks like it was done right after the one above. Is this the last log in the text file? Something else to try - run a driver clean tool from Nero - link
