DigiVox Tutorial

For all who need help with digiVox's
here is a tutorial for set up !

How to Load Firmware.

1. Insert CD
2. Save all files into a folder or onto your desktop. Drag and drop
3. Remove CD
4. Turn off PC.
5. Connect PC to Digivox via the serial port using an RS232 cable.
6. Turn on Digivox & then turn on PC.
7. Open loader software “DOWNLOADER 10”
8. Check settings and parameters. Defaults are usually correct.
9. Browse for bin file (digivox_z20070101_v2500_api )
For all files and the downloader 10 click this link http://eko.4shared.com/ and hit digivox

and select.
10. Check “app file” (default).
11. Click “download”
12. A progress bar will appear. Wait for “download complete “ window to pop-up
13. Turn off Digivox and PC then disconnect.

Enabling Key Emulator
1. Connect Digivox to TV (usually scart), cable feed and power on.
2. Perform full auto-scan.
3. Go to “main menu”
4. Scroll down to “System Information”, press “OK” to enter System Information menu.
5. On your remote control press “ 1 0 0 4 ” (ignore what happens on the screen)
6. “Key Emu” will now be visible on the screen.
7. Change “Key Emu” to ON
8. Exit menus and return to TV mode.
9. Go to a scrambled / encrypted channel and wait for update process to complete.
10. Scrambled channels should now be unlocked.

Problems with no sound
To get back sound on e4 sky1 ect just select the channel in question press menu, select installation, select manual scan, click ok on down frequency. It'll now scan for channels when its finished exit back to normal tv viewing screen go to the end of your channel listing and the desired channel will be there with sound. This can be done on any channel with no sound by just selecting that channel following the instructions above.

 

Any one with a 'bad scrambled screen' or cant get all the channels unblocked

Frequency change fix
1 Menu
2 Factory settings
3 type in code ( 0000)
4 press ok. this will delete channels.
5 Then Hit Installation
6 Change provider (Eg n*L etc)to which ever one used in your area.
7 autoscan ( when it says *** channels found , exit back out all the way until u are back at the scrambled/no signal 'tv' screen)
8 Hit menu again
9 go into sysrem information
10 press info on remote and type in 1004
11 new screen appears , change EMU to on
Then exit back out all the way until u are back at the scrambled/no signal 'tv' screen and hey presto your sorted !

 

hi how do i PM for latest software and uploaded for digivox

 

got your pm mate and replied...

 

hi mainamn, could you send me the latest files and the downloader 10 for the digivox.
cheers mainamn

 

hi m8 , goto the eko.4 link under my post. its there
ring my bell if your stuck !

 

What is your question mate ?

 

got a digivox.i get all the channels no problem.it is just sky 1-3 break up badly.is there anything i can do?emu is turned on.

 

have u got v2500 on it !
check your system info to find out.
also try freq 315.00 for s&k sports 1
and 355.500 for s*y 2&3
These are freq for Ireland

 

.yes got 2.500.havnt tried the frequencies cos i dont know what im doing.at the momentits working with a little break up.i havnt done anything,so i will bear with it.thanks for your advice.much appreciated.

 

v2600 will stop the breaking up.

 

thanks mainman.my version is 2.500.s/sports 1-3 work sometimes but other times nothing at all.im wondering if it is a signal problem.i will try the 2.6 and let you know.thanks for your help.appreciated.

 

no problem.
If you are still having problems let me know ..

 

hi mainman.installed version 2.6 but got same problem.all other sports chans except 1-3.dont know what to do.

 

It may be a cable problem in your area. I know a guy who cant get the dis*ey channels but his friend around the corner can !
Maybe try some variations with the freq's.
for eg. try 315.500 instead of 315.000 etc...

 

thanks again m8.but no joy.just a thought.my signal is split between an upstairs and downstairs connection.would that av any bearing on it?but then again i get all the other chans.

 

That would cause a weaker signal, splitting does this ( it splits the sig strenght)
U might have to try a more powerfull splitter !

 

can u reccomend one.i bought one on ebay but it dont work.

 

Im not sure,
I would recommend looking at maplins website, Im sure u will find some high power ones there !