not all channels are coming through on starview

sorry people but this is doing my head in i just got this box and everthing is like it said except i can't seem to to tune itv1 channel4 rte1 rte2 tg4 all these channels run on the same freq 498250 qam64 6887 iknow this as i checked it with my neighbour who is getting all these channels i have checked and treble checked cables i have done about ten resets and rescans i've done man/scans i bet its somthing silly thanks again but this is driving me crazy

 

Try do a manual scan on 339500

 

had a go at that no joy have any other suggestions mate

 

try : itv 1 563.000.: ch4 427.000,

 

tried that mate no joy do you reckon this is just tuning problems or could it be something else eg; something with box or codes by the way thank you for your help

 

check ur codes against the most recent ones
just click on my name and goto 'Main Starview Thread'
it is not your box. maybe its a prob in your area !

 

if you meant the keys they are fine do you reckon it is the codes i flashed to the box from the disc i got with it could cause this problem and would it do any harm to flash it again with the latest codes i d'ont think its a problem in the area as my mate next door gets all his channels thats why its so annoying

 

You could try flash it again , have you a clone or genuine box and what version is currently installed . go to Menu . system information and tell us what api is installed

 

it reads the box pvr dual record pvr e-ver 4.000,8 june 2007 and as far as i am aware its a genuine box

 

you wouldnt have flashed codes from a disk . codes are got by the receiver using the firmware on the box.
Normaly if you are missing some channels it means that
1) there is a prob in area
2) one or two digits in your codes could be wrong
I would try a manual scan then hit downfrequency then go to all channels to see if they came in !
if not , start from scratch , reflash, autoscan again.
go through the tutorial again here http://forums.afterdawn.com/thread_view.cfm/531363

 

I think it might be something to do with the PVR loader or firmware , what loader did you use to flash the box

 

pvr loader v3.36s sept 7 2005 the boxpvr v4000 8 july is this the right information thanks for your help

 

I will give you the latest loader and firmware , gimme 2 mins to upload it

 

Hope this works

PVR Loader

http://www.MegaShare.com/236741

PVR Firmware
http://www.MegaShare.com/236743

 

no joy mate driving me crazy this getting an earful now for buying it. woman and corrie lol

 

m8 . try the main thread on starviews , one of the lads there may be able to help u out !

http://forums.afterdawn.com/thread_view.cfm/531363

 

Just a question for you , where are you and what cable provider are you using

 

celtic he is sorted he is using a pvr box not starview we look after

 

belfast ntl

 

I told you the help you get here wont work for your box i sent you a pm with a link on it for your box click on the link and you will get help there ok