No Power On My Sagem

Hello to everybody in this forum.

I have a slight problem with my sagem box there is no power. I have checked the orange fuse and it is ok but a couple of resisstors have burnt out so much that the outer casing has come off. If there is anybody out there with a sagem box that knows the correct vaule for RR1516, RR1518, RR1519. If you can not work out the values can you just tell me what colour the bands are please.

Thanks for any help

 

The resistors are not burned out.
The dark colour for that parts is normal for a sagem psu.
Check the psu fuse and check the fuse of the plug.

 

Hi thanks for your reply, I have checked the fuse on the board and in the plug again and they are both ok. I have also measured the ohm's resistance across the ressistors and they are all showing 0 value.

 

You should adjust your multimeter to ohm and not kohm.

 

Hi I have checked my multimeter and it is set to ohm's but the are still reading 0. Am I best just buying another psu?

 

RR1516 -> 1kOhm.
RR1518 and 1519 -> 220 Ohm or 120 Ohm depending on the psu version.
Use 2W types.

 

Thanks for the values I will pick them up today and fix them in when I have finished work. I will let you know.

Thanks for all your help.