I STARTED USING NERO TO BURN SOME MOVIES ON DVD-R BUT I ENCOUNTERED A PROBLEM ON SOME OF THE MOVIES.... WHENEVER IM WATCHING A MOVIE ON MY DVD PLAYER THE MOVIE FREEZES... NOT FOR A LONG TIME BUT SOMETIMES I HAVE TO FF IN ORDER FOR THE MOVIE TO CONTINUE... AND I KNOW ITS NOT THE DVD PLAYR BECAUSE IT HAPPENS ON OTHERS ALSO
wow sorry bout the caps guy.... no need to be grouchy about it... well im new to this site and yeah i might sound like an idiot but what is a recode
SILONER it is a good thing to read the rules here at afterdawn before you post a question and when you post a question, the topic heed to be something more thain help me! also multiposting is not alowed here eather, that is don't start the same thread in different forums, if you keep doing this you could get banned, just a heads up ok? hope we can help you with your problems that you have with your problems with making your dvd backups! good luck
Caps is annoying to read and against the rules; I'm not grouchy nor "crabby", honest. As for the log, that will help us determine what went wrong in your burning process that causes the discs to skip. You can find it in Nero Program files under something like "Nero History.txt". http://forums.afterdawn.com/thread_view.cfm/565142 http://forums.afterdawn.com/thread_view.cfm/565174 //Thanks creaky//
sorry about all that... like i always do i never read the rules and know that i did i'm sorry... and for the help, thanks even though i already solved my problem i thank all you guys for the help
ok i found my nero log but what should i post? here is some but dont know if i shoul pos all this Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4084N atapi Port 0 ID 0 DMA: On DiskPeripheral : FUJITSU MHV2080BH iaStor Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4084N E: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1013MB (1038316kB) Free physical memory: 648MB (664040kB) Memory in use : 36 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.9.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 12:51:46 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 12:51:46 AM #2 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 12:51:46 AM #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD+R S01 T01 Con 0x14 Start 0 Len 2220880 NWA -1 (gap 0) Blank 0 Res 1 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 12:51:46 AM #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2220880 = 2220880, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:51:46 AM #5 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 12:51:46 AM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2220879 (493:31.54, 4337MB) 12:51:46 AM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 12:51:46 AM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:51:46 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2220880 (2220880) = #2220880/493:31.55 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2220880 blocks [Image Recorder] -------------------------------------------------------------- 12:51:46 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4548362240, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2220880 | 2220880 | 0x00 2220880 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 12:51:46 AM #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 12:51:46 AM #12 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 12:51:46 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:51:46 AM #14 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 1:10:49 AM #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 2220880 (21E350h), length 0 blocks 1:10:50 AM #16 Phase 121 File dlgbrnst.cpp, Line 1762 Creating Image completed successfully 1:10:53 AM #17 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:10:57 AM #18 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:10:57 AM #19 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 1:11:09 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:11:13 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4548362240 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\My Documents\TempImage.nrg> 1:11:14 AM #3 Text 0 File Burncd.cpp, Line 3508
sorry for all this here is my last one i did can anyone help? Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4084N atapi Port 0 ID 0 DMA: On DiskPeripheral : FUJITSU MHV2080BH iaStor Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4084N E: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1013MB (1038316kB) Free physical memory: 633MB (648688kB) Memory in use : 37 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.9.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 1:33:16 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:33:17 AM #2 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 1:33:17 AM #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2251856 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 1:33:17 AM #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2251856 = 2251856, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 1:33:17 AM #5 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 1:33:17 AM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2251855 (500:24.55, 4398MB) 1:33:17 AM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 1:33:17 AM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:33:17 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2251856 (2251856) = #2251856/500:24.56 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2251856 blocks [Image Recorder] -------------------------------------------------------------- 1:33:17 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4611801088, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2251856 | 2251856 | 0x00 2251856 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 1:33:17 AM #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 1:33:17 AM #12 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 1:33:17 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:33:17 AM #14 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 1:52:32 AM #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 2251856 (225C50h), length 0 blocks 1:52:32 AM #16 Phase 121 File dlgbrnst.cpp, Line 1762 Creating Image completed successfully 1:52:33 AM #17 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:52:36 AM #18 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:52:36 AM #19 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 1:52:38 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:52:39 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4611801088 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Owner\My Documents\TempImage.nrg> 1:52:39 AM #3 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 1:53:11 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2251855 (500:24.55, 4398MB) 1:53:11 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 1:53:11 AM #6 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: HL-DT-ST DVDRAM GSA-4084N, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 1:53:11 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) 1:53:11 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2251856 (2251856) = #2251856/500:24.56 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2251856 blocks [E: HL-DT-ST DVDRAM GSA-4084N] -------------------------------------------------------------- 1:53:11 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: HL-DT-ST DVDRAM GSA-4084N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4611801088, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2251856 | 0 | 0x00 2251856 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 1:53:11 AM #10 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 1:53:11 AM #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 1:53:11 AM #12 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 1:53:11 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:53:11 AM #14 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 1:53:11 AM #15 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 1:53:11 AM #16 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:53:11 AM #17 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 1:53:31 AM #18 Text 0 File Cdrdrv.cpp, Line 1352 01:53:31.828 - E: HL-DT-ST DVDRAM GSA-4084N : Queue again later 2:07:51 AM #19 Text 0 File WriterStatus.cpp, Line 113 <E: HL-DT-ST DVDRAM GSA-4084N> start writing Lead-Out at LBA 2251856 (225C50h), length 0 blocks 2:08:09 AM #20 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 2251855 (225C4Fh) 2:08:09 AM #21 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 4x (5,540 KB/s) 2:08:10 AM #22 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:08:13 AM #23 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 2:08:13 AM #24 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
http://webpages.charter.net/bacitup/TheGuides/NVE Basics.pdf http://www.dvdplusvideo.com/petesguide2.html http://www.dvdplusvideo.com/Guides/Burning your DVD movie with Nero 6.pdf http://www.dvdplusvideo.com/Guides/Shrink_Nero_Guide.html
