Hi, I just bought an external samsung dual layer dvd writer, and was trying to burn an xbox 360 game to a blank dl dvd+r. I did everything right, I think: saved the .ISO, created a .dvd file with the layer break info, set the layerbreak on IMGBurn to 1913760, and started burning. Then IMGBurn burns the image (100% completion), and, in "verify" mode, the following message appears at the 50% mark:
I/O ERROR!
DEVICE [0.0.0] TSSTcorp CD/DVDW SH-S182M SB05 (E: USB)
SciStatus: 0x02
Interpretation: Check Condition
CDB: 28 00 00 1D 33 A0 00 00 01 00
Interpretation: Read (10) – Sector: 1913760
Sense Area: 70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 00 00 00 00
Interpretation: Timeout on Logical Unit

When I insert the dvd into the xbox360, it says something like "invalid disk"
What am I doing wrong??? I already wasted 2 dl dvds and they aren´t exactly cheap!

try burning one with the verify box unchecked as i never do that with mine, i just let it burn finalise an its done. also check to see if the firmware on the writer is up to date, that can help

Already did both, nothing works...

Any other suggestions??

shame their isnt more info on this problem, because i am recieved the same error

what media are you using?
the make of the dl dvd's is quite a factor, also, try not to use your computer while burning.

i have a strange situation where i can only use Verbatim DL Dvd's - expensive for me, but any other media results in a nice shiny new coaster for my collection.

What software are you making the ISO with?

I presume you have downloaded the latest versions of the software you use!? I find I can use any burner if I make the ISO with Schtrom and burn with Imgburn and Verbatim DVDs. I do not verify either as it takes too long and I left all other default options as they were - I did not change any of the things you mentioned.

One last thing, unlike many other people here, I burn on the lowest speed I can (old PS1 & PS2 habit) and I have never had a duff game :)

Good luck m8!

Ive got a sony AW-G170A burner (mate of mine uses one with no coasters) and its running as the primary master on the secondary IDE channel. i extracted the .iso/.dvd using Schtrom version 3.3. I kept the task as whole disc (stealth extreme 3.0 splitvid), and used a sammy for the extraction.

Im using Aone discs (with i think are rebaged RICOH discs) and again i know these work as my mate with the same burner has no problems (a coaster in 10, i think he said), but i have also had 2 coasters using Verbs. Using ImgBurn 2.3.2.0 I always get the same error. Half way through verification (just as it goes from one layer to the next) and i get the error below.




My error log is this:

---

SONY DVD RW AW-G170A 1.73 (ATA)

Current Profile: DVD+R DL



Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 3,825,936

Size: 7,835,516,928 bytes

Time: 850:14:36 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x, 6x, 8x



DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,913,760

Changeable: No



TOC Information:

Session 1...

-> Track 01  (Mode 1, LBA: 0 - 3825935)

-> LeadOut  (LBA: 3825936)



Physical Format Information (ADIP):

Disc ID: RICOHJPN-D01-67

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519



Physical Format Information (Last Recorded):

Disc ID: RICOHJPN-D01-67

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,579,023

Last Physical Sector in Layer 0: 2,110,367



Layer Information:

Layer 0 Sectors: 1,913,760 (50.02%)

Layer 1 Sectors: 1,912,176 (49.98%)



**************************************************************************************

I 19:33:06 ImgBurn Version 2.3.2.0 started!

I 19:33:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 19:33:06 Total Physical Memory: 1,047,792 KB  -  Available: 620,612 KB

I 19:33:06 Initialising SPTI...

I 19:33:06 Searching for SCSI / ATAPI devices...

I 19:33:06 Found 1 DVD±RW/RAM!

I 22:45:23 Operation Started!

I 22:45:23 Source File: C:\Documents and Settings\Luke\Desktop\Xbox 360 Files\Games\Two Worlds\IMAGE1.dvd

I 22:45:23 Source File Sectors: 3,825,924 (MODE1/2048)

I 22:45:23 Source File Size: 7,835,492,352 bytes

I 22:45:23 Source File Volume Identifier: XGD2DVD_NTSC

I 22:45:23 Source File Implementation Identifier: Sonic Scenarist 3.1

I 22:45:23 Source File File System(s): ISO9660, UDF (1.02)

I 22:45:23 Destination Device: [1:0:0] SONY DVD RW AW-G170A 1.73 (E:) (ATA)

I 22:45:23 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:45:24 Destination Media Sectors: 4,173,824

I 22:45:24 Write Mode: DVD

I 22:45:24 Write Type: DAO

I 22:45:24 Write Speed: 2.4x

I 22:45:24 Link Size: Auto

I 22:45:24 Test Mode: No

I 22:45:24 BURN-Proof: Enabled

I 22:45:24 Optimal L0 Data Zone Capacity: 1,913,760

I 22:45:24 Optimal L0 Data Zone Method: Copied From Original Disc

I 22:45:51 Filling Buffer... (40 MB)

I 22:45:53 Writing LeadIn...

I 22:45:54 Writing Image... (LBA: 0 - 3825923)

I 22:45:54 Writing Layer 0... (LBA: 0 - 1913759)

I 23:05:04 Writing Layer 1... (LBA: 1913760 - 3825923)

I 23:24:48 Synchronising Cache...

I 23:24:49 Closing Track...

I 23:24:58 Finalising Disc...

I 23:25:56 Image MD5: 22cf6e2fb9e9149c8b25e11dc7ecbefe

I 23:25:57 Operation Successfully Completed! - Duration: 00:40:32

I 23:25:57 Average Write Rate: 3,279 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x)

I 23:25:57 Cycling Tray before Verify...

I 23:26:25 Device Ready!

I 23:26:26 Operation Started!

I 23:26:26 Source Device: [1:0:0] SONY DVD RW AW-G170A 1.73 (E:) (ATA)

I 23:26:26 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)

I 23:26:26 Image File: C:\Documents and Settings\Luke\Desktop\Xbox 360 Files\Games\Two Worlds\IMAGE1.dvd

I 23:26:26 Image File Sectors: 3,825,924 (MODE1/2048)

I 23:26:26 Image File Size: 7,835,492,352 bytes

I 23:26:26 Image File Volume Identifier: XGD2DVD_NTSC

I 23:26:26 Image File Implementation Identifier: Sonic Scenarist 3.1

I 23:26:26 Image File File System(s): ISO9660, UDF (1.02)

I 23:26:26 Verifying Sectors... (LBA: 0 - 3825923)

I 23:26:26 Verifying Layer 0... (LBA: 0 - 1913759)

I 23:32:15 Verifying Layer 1... (LBA: 1913760 - 3825923)

E 23:51:01 Failed to Read Sector 1913760 - Unrecovered Read Error

E 23:51:01 Failed to Verify Sectors!

E 23:51:01 Operation Failed! - Duration: 00:24:35

I 23:51:01 Average Verify Rate: 2,594 KB/s (1.9x) - Maximum Verify Rate: 16,009 KB/s (11.6x)



************************************************************************************************

---

Any ideas? Ive searched the net with these one for weeks and i cant find any definitive answer to what might be happening. thanks for any help.

for the thread starter - it looks like u did everything just fine except set the booktype ...

click the book icon on the bottom right corner of the ImgBurn program and select ur drive, click the "Change for" drop down menu and select DL media, then select "DVD-Rom" from the New Setting drop down menu ... click the "Change" button ... click OK on the popup window then Ok on the book type menu - burn the game ...

if you did this exactly as i said, ur burner is updated and your game still doesnt work then your 360 probably isnt flashed properly ...

(or the game is crap, but if u downloaded a scene rls then this probably isnt the case)

i'm having the same TOC error but it just started happening. I'm using verbatim disk and my drive is a pioneer dvr 111d. i've never had a problem burning anything before. i've used 4 different vebatim disk and all same TOC error. Please help. could it be drive going bad?

Same problem here, Ive been burning 360 discs for awhile now with this burner and Ritek DL discs. Always at 2X. Ive done over 40 games no problems ever. Now all the sudden ImgBurn wont work for squat. Constantly gives that error in the beginning, nothing changed, even updated DVD Firmware for shitzngiggle (even though it was perfectly fine for the previous burns with same exact media)

Oddly enough I can use Xbox Backup Creator and select Nero to burn the game and it works fine (funny it use to fail, whole reason why I went to ImgBurn back in the day!)

I see lots of people posting this problem all the sudden and no real suggestions or fixes yet as to why it all the sudden started up! ITS A CONSPIRACY I TELL YA!

Well i tried using Nero burning rom and i still got the same TOC error. I personally think it has to be the drive. i also went out and purchased a Optiarc DVD RW AD 7170A and it burns the images from Imgburn fine but its burning unreadable disks. IT'S BURNING 100% ERROR FREE let imgburn tell it and then the xbox can't read it? Please SOMEONE HEEEEEELP!!

Also when i double check the image on the burned disked(3 Verbatim disk) it's on there but the xbox can't read it.

Originally posted by IrishTR:

---

Same problem here, Ive been burning 360 discs for awhile now with this burner and Ritek DL discs. Always at 2X. Ive done over 40 games no problems ever. Now all the sudden ImgBurn wont work for squat. Constantly gives that error in the beginning, nothing changed, even updated DVD Firmware for shitzngiggle (even though it was perfectly fine for the previous burns with same exact media)

Oddly enough I can use Xbox Backup Creator and select Nero to burn the game and it works fine (funny it use to fail, whole reason why I went to ImgBurn back in the day!)

I see lots of people posting this problem all the sudden and no real suggestions or fixes yet as to why it all the sudden started up! ITS A CONSPIRACY I TELL YA!

---

Ok UPDATE, now tell me this crap isnt weird.... If I open the ISO/DVD file straight to IMGBurn I get the errors listed above. If I use Xbox Backup Creator and select it to use IMGBurn, the damn thing works fine... WTH! After 40 games (for 360 alone) not counting the timeless other things Ive used IMGBurn for its acting all retarded!!!

Sigh, at least its working somewhat for now....

You don't have need the .dvd file if you already set the layerbreak in imgburn, just burn the iso.

I know I dont need it but Ive just always used it and its always worked until recently (and when I say always I mean since my 360 was first hacked well over a 6 months ago).

Ah well guess its a problem I'll have to deal with as I see no where on the web has any clue or fix been figured out for this error on any site.

Originally posted by Lucusade:

---

Ive got a sony AW-G170A burner (mate of mine uses one with no coasters) and its running as the primary master on the secondary IDE channel. i extracted the .iso/.dvd using Schtrom version 3.3. I kept the task as whole disc (stealth extreme 3.0 splitvid), and used a sammy for the extraction.

Im using Aone discs (with i think are rebaged RICOH discs) and again i know these work as my mate with the same burner has no problems (a coaster in 10, i think he said), but i have also had 2 coasters using Verbs. Using ImgBurn 2.3.2.0 I always get the same error. Half way through verification (just as it goes from one layer to the next) and i get the error below.




My error log is this:

---

SONY DVD RW AW-G170A 1.73 (ATA)

Current Profile: DVD+R DL



Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 3,825,936

Size: 7,835,516,928 bytes

Time: 850:14:36 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x, 6x, 8x



DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,913,760

Changeable: No



TOC Information:

Session 1...

-> Track 01  (Mode 1, LBA: 0 - 3825935)

-> LeadOut  (LBA: 3825936)



Physical Format Information (ADIP):

Disc ID: RICOHJPN-D01-67

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519



Physical Format Information (Last Recorded):

Disc ID: RICOHJPN-D01-67

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,579,023

Last Physical Sector in Layer 0: 2,110,367



Layer Information:

Layer 0 Sectors: 1,913,760 (50.02%)

Layer 1 Sectors: 1,912,176 (49.98%)



**************************************************************************************

I 19:33:06 ImgBurn Version 2.3.2.0 started!

I 19:33:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 19:33:06 Total Physical Memory: 1,047,792 KB  -  Available: 620,612 KB

I 19:33:06 Initialising SPTI...

I 19:33:06 Searching for SCSI / ATAPI devices...

I 19:33:06 Found 1 DVD±RW/RAM!

I 22:45:23 Operation Started!

I 22:45:23 Source File: C:\Documents and Settings\Luke\Desktop\Xbox 360 Files\Games\Two Worlds\IMAGE1.dvd

I 22:45:23 Source File Sectors: 3,825,924 (MODE1/2048)

I 22:45:23 Source File Size: 7,835,492,352 bytes

I 22:45:23 Source File Volume Identifier: XGD2DVD_NTSC

I 22:45:23 Source File Implementation Identifier: Sonic Scenarist 3.1

I 22:45:23 Source File File System(s): ISO9660, UDF (1.02)

I 22:45:23 Destination Device: [1:0:0] SONY DVD RW AW-G170A 1.73 (E:) (ATA)

I 22:45:23 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)

I 22:45:24 Destination Media Sectors: 4,173,824

I 22:45:24 Write Mode: DVD

I 22:45:24 Write Type: DAO

I 22:45:24 Write Speed: 2.4x

I 22:45:24 Link Size: Auto

I 22:45:24 Test Mode: No

I 22:45:24 BURN-Proof: Enabled

I 22:45:24 Optimal L0 Data Zone Capacity: 1,913,760

I 22:45:24 Optimal L0 Data Zone Method: Copied From Original Disc

I 22:45:51 Filling Buffer... (40 MB)

I 22:45:53 Writing LeadIn...

I 22:45:54 Writing Image... (LBA: 0 - 3825923)

I 22:45:54 Writing Layer 0... (LBA: 0 - 1913759)

I 23:05:04 Writing Layer 1... (LBA: 1913760 - 3825923)

I 23:24:48 Synchronising Cache...

I 23:24:49 Closing Track...

I 23:24:58 Finalising Disc...

I 23:25:56 Image MD5: 22cf6e2fb9e9149c8b25e11dc7ecbefe

I 23:25:57 Operation Successfully Completed! - Duration: 00:40:32

I 23:25:57 Average Write Rate: 3,279 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x)

I 23:25:57 Cycling Tray before Verify...

I 23:26:25 Device Ready!

I 23:26:26 Operation Started!

I 23:26:26 Source Device: [1:0:0] SONY DVD RW AW-G170A 1.73 (E:) (ATA)

I 23:26:26 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)

I 23:26:26 Image File: C:\Documents and Settings\Luke\Desktop\Xbox 360 Files\Games\Two Worlds\IMAGE1.dvd

I 23:26:26 Image File Sectors: 3,825,924 (MODE1/2048)

I 23:26:26 Image File Size: 7,835,492,352 bytes

I 23:26:26 Image File Volume Identifier: XGD2DVD_NTSC

I 23:26:26 Image File Implementation Identifier: Sonic Scenarist 3.1

I 23:26:26 Image File File System(s): ISO9660, UDF (1.02)

I 23:26:26 Verifying Sectors... (LBA: 0 - 3825923)

I 23:26:26 Verifying Layer 0... (LBA: 0 - 1913759)

I 23:32:15 Verifying Layer 1... (LBA: 1913760 - 3825923)

E 23:51:01 Failed to Read Sector 1913760 - Unrecovered Read Error

E 23:51:01 Failed to Verify Sectors!

E 23:51:01 Operation Failed! - Duration: 00:24:35

I 23:51:01 Average Verify Rate: 2,594 KB/s (1.9x) - Maximum Verify Rate: 16,009 KB/s (11.6x)



************************************************************************************************

---

Any ideas? Ive searched the net with these one for weeks and i cant find any definitive answer to what might be happening. thanks for any help.

---

This same thing is happening to me and I am also getting the same error message. I am using IMGBurn and I have a PIONEER DVD-RW DVR-111DBK. I tried to follow pilferd's advice about changing the book type but that is when the problem arises. I have 8 different tabs to choose from (Samsung, RICOH, Plextor, Nu Tech, NEC, LITE-ON, LG, and BenQ), when I try to select any DL media under ANY of the tabs the message in the current settings reads, "Unknown (FAILED!)". So needless to say I cannot change the book type to "DVD-Rom" from the New Setting drop down menu. Does anybody have any ideas or suggestions as to what I can do to fix this so I can burn my game?

I have the exact same problem gets to 50% verify then fails.

I even brought a new dvd writer pioneer 112d with latest firmware

but still the same problem.

sometimes it will work and sometimes it wont.

the game always burns fine but most of the time fails to verify

someone must know the answer to this?