yesterday i tried to burn my first dual layer discs and i made three coasters....yay!! i'll start off by saying that they are memorex and made in taiwan (i know that will be the first hit against me) the first time i tried to use dvdshrink but it only said that the disc was a reg 4.7 so i decided to try it anyway. of course it didn't burn right. so then i moved to nero and tried the same file again and it failed in the same place. that made me wonder if the file i was trying to burn had a problem so i moved to a different movie. when that failed i decided to save the error log and see if anyone had advice as to what is going on. i've burned about 30 phillips dvd+r on this driver and about 5 lightscribe discs without any problem and i've used shrink/nero to do all the previous burns. any input would be appreciated as i have more than lifetime supply of those rear view mirror discs thanks, Joshua Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 (Nero Express) Recorder: <HL-DT-ST DVDRRW GSA-H20L>Version: S742 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GSA-H20L >Version: S742 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD2000JS-60NCB1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: Off CdRomPeripheral : COMPAQ CD-ROM LTN485 atapi Port 5 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GSA-H20L E: CdRom0 COMPAQ CD-ROM LTN485 F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 958MB (981484kB) Free physical memory: 427MB (437592kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.10.2007 UDF/ISO compilation 6:39:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:39:19 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762 DVD-Video files reallocation started 6:39:19 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 616 Content of VIDEO_TS.IFO has been modified 6:39:19 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 616 Content of VIDEO_TS.BUP has been modified 6:39:19 PM #5 Phase 113 File dlgbrnst.cpp, Line 1762 DVD-Video files reallocation completed 6:39:19 PM #6 Text 0 File Isodoc.cpp, Line 6666 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 6:39:19 PM #7 Phase 111 File dlgbrnst.cpp, Line 1762 DVD-Video files sorted 6:39:19 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 6:39:19 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 6:39:19 PM #10 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 6:39:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3719263 (826:30.13, 7264MB) 6:39:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 6:39:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66 Disc Application Code: 0, Extended Information Indicators: 3 6:39:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:39:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3719264 (3719264) = #3719264/826:30.14 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3719264 blocks [E: HL-DT-ST DVDRRW GSA-H20L] -------------------------------------------------------------- 6:39:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7617052672, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3719264 | 0 | 0x00 3719264 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:39:20 PM #17 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 6:39:20 PM #18 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 6:39:20 PM #19 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 6:39:20 PM #20 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 6:39:20 PM #21 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 6:39:20 PM #22 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 6x (8,310 KB/s) 6:39:20 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:39:20 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x062ac8c0: Len x648 6:39:20 PM #25 Text 0 File DVDPlusDualLayer.cpp, Line 659 L0 Data Zone Capacity set to 1859648 (1C6040h, 3632MB) -> OK, confirmed setting 6:39:20 PM #26 CDR -1205 File DVDPlusDualLayer.cpp, Line 686 Burning Layer 1 6:39:20 PM #27 Text 0 File DVDPlusDualLayer.cpp, Line 696 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 6:39:20 PM #28 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: S04 Product revision number: 66 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@ 25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 6:39:20 PM #29 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x062ac8c0: Len x648 6:39:20 PM #30 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 6:39:20 PM #31 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 7:09:36 PM #32 CDR -1206 File DVDPlusDualLayer.cpp, Line 1969 Burning Layer 2 7:09:36 PM #33 Text 0 File DVDPlusDualLayer.cpp, Line 1980 Perform layer 1 to 2 jump before writing at address 1859648 (1C6040h) 7:11:03 PM #34 SPTI -1 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x80 Sense Qual: 0x04 CDB Data: 0x2A 00 00 1C 76 80 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 80 04 Buffer x0c44c3c0: Len x10000 0x00 00 01 BA 44 7E 24 50 EC 15 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 61 88 26 A8 07 83 64 E2 DB 0x9B 00 66 1A 03 10 03 E0 1D 00 9C 0A 80 5C 1C 03 7:11:03 PM #35 CDR -1 File Writer.cpp, Line 303 Unspecified Recorder Error E: HL-DT-ST DVDRRW GSA-H20L 7:12:48 PM #36 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 1865344 7:13:05 PM #37 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 6x (8,310 KB/s) 7:13:06 PM #38 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:13:12 PM #39 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 7:13:12 PM #40 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi, maybe this will help 1) make an iso file of the stuff u want 2 burn (with Imgburn in the build mode) Imgburn is free at Imgburn.com 2) Use the calculator on Imgburn to get best layer break position 3) reset imgburn to write mode 4) Booktype dvd+r d/l to DVD-ROM In Imgburn 5) Burn image(iso file) with Imgburn 6) Enjoy ! 7) the disks u r using are Ritek and r pretty good 8) Imgburn - best there is!
Absolutely, u can do it with Imgburn. In the mode box, it drops down and u will see build , click it and it will then convert the files to iso format. Don't forget 2 use the layer break point calculator 2 get best layer break/transition point. Then after Imgburn does it's job, burn the outputted file with Imgburn in the write mode(same prev box that dropped) U may need 2 see if u can find a tutorial/guide for all of Imgburn's capabilities. Happy hunting
it only burned the first layer then it started this could my burner be bad? I 19:03:37 Writing Layer 0... (LBA: 0 - 1870863) I 19:33:32 Writing Layer 1... (LBA: 1870864 - 3701983) W 19:34:24 Failed to Write Sectors 1872752 - 1872783 - Unknown (Vendor Unique) (0x80, 0x04) W 19:34:24 Retrying (1 of 20)... W 19:34:24 Retry Failed - No Seek Complete W 19:34:24 Retrying (2 of 20)... I 19:34:24 Writing Image... W 19:36:00 Failed to Write Sectors 1875920 - 1875951 - Unknown (Vendor Unique) (0x80, 0x04) W 19:36:00 Retrying (1 of 20)... W 19:36:00 Retry Failed - No Seek Complete W 19:36:00 Retrying (2 of 20)... I 19:36:01 Writing Image... W 19:38:09 Failed to Write Sectors 1905904 - 1905935 - Unknown (Vendor Unique) (0x80, 0x04) W 19:38:09 Retrying (1 of 20)... W 19:38:09 Retry Failed - No Seek Complete W 19:38:09 Retrying (2 of 20)... I 19:38:10 Writing Image... W 19:38:56 Failed to Write Sectors 1906544 - 1906575 - Unknown (Vendor Unique) (0x80, 0x04) W 19:38:56 Retrying (1 of 20)... W 19:38:56 Retry Failed - No Seek Complete W 19:38:56 Retrying (2 of 20)... I 19:38:56 Writing Image... W 19:41:24 Failed to Write Sectors 1931248 - 1931279 - Unknown (Vendor Unique) (0x80, 0x04) W 19:41:24 Retrying (1 of 20)... W 19:41:24 Retry Failed - No Seek Complete W 19:41:24 Retrying (2 of 20)... I 19:41:24 Writing Image... W 19:42:59 Failed to Write Sectors 1936976 - 1937007 - Unknown (Vendor Unique) (0x80, 0x04) W 19:42:59 Retrying (1 of 20)... W 19:42:59 Retry Failed - No Seek Complete W 19:42:59 Retrying (2 of 20)... I 19:43:00 Writing Image... W 19:43:49 Failed to Write Sectors 1940208 - 1940239 - Unknown (Vendor Unique) (0x80, 0x04) W 19:43:49 Retrying (1 of 20)... W 19:43:49 Retry Failed - No Seek Complete W 19:43:49 Retrying (2 of 20)... I 19:43:50 Writing Image... W 19:45:52 Failed to Write Sectors 1952176 - 1952207 - Unknown (Vendor Unique) (0x80, 0x04) W 19:45:52 Retrying (1 of 20)... W 19:45:52 Retry Failed - No Seek Complete W 19:45:52 Retrying (2 of 20)... I 19:45:52 Writing Image... W 19:47:36 Failed to Write Sectors 1965520 - 1965551 - Unknown (Vendor Unique) (0x80, 0x04) W 19:47:36 Retrying (1 of 20)... W 19:47:36 Retry Failed - No Seek Complete W 19:47:36 Retrying (2 of 20)... I 19:47:36 Writing Image... W 19:49:05 Failed to Write Sectors 1967440 - 1967471 - Unknown (Vendor Unique) (0x80, 0x04) W 19:49:05 Retrying (1 of 20)... W 19:49:05 Retry Failed - No Seek Complete W 19:49:05 Retrying (2 of 20)... I 19:49:06 Writing Image... W 19:50:52 Failed to Write Sectors 1974448 - 1974479 - Unknown (Vendor Unique) (0x80, 0x04) W 19:50:52 Retrying (1 of 20)... W 19:50:52 Retry Failed - No Seek Complete W 19:50:52 Retrying (2 of 20)... I 19:50:53 Writing Image... W 19:52:38 Failed to Write Sectors 1982736 - 1982767 - Unknown (Vendor Unique) (0x80, 0x04) W 19:52:38 Retrying (1 of 20)... W 19:52:38 Retry Failed - No Seek Complete W 19:52:38 Retrying (2 of 20)... I 19:52:39 Writing Image... W 19:53:38 Failed to Write Sectors 1986224 - 1986255 - Unknown (Vendor Unique) (0x80, 0x04) W 19:53:38 Retrying (1 of 20)... W 19:53:38 Retry Failed - No Seek Complete W 19:53:38 Retrying (2 of 20)... I 19:53:39 Writing Image... W 19:55:00 Failed to Write Sectors 1986864 - 1986895 - Unknown (Vendor Unique) (0x80, 0x04) W 19:55:00 Retrying (1 of 20)... W 19:55:00 Retry Failed - No Seek Complete W 19:55:00 Retrying (2 of 20)... I 19:55:00 Writing Image... W 19:55:46 Failed to Write Sectors 1987504 - 1987535 - Unknown (Vendor Unique) (0x80, 0x04) W 19:55:46 Retrying (1 of 20)... W 19:55:46 Retry Failed - No Seek Complete W 19:55:46 Retrying (2 of 20)... I 19:55:46 Writing Image... W 19:57:05 Failed to Write Sectors 1988144 - 1988175 - Unknown (Vendor Unique) (0x80, 0x04) W 19:57:05 Retrying (1 of 20)... W 19:57:05 Retry Failed - No Seek Complete W 19:57:05 Retrying (2 of 20)... I 19:57:06 Writing Image... W 19:58:26 Failed to Write Sectors 1989680 - 1989711 - Unknown (Vendor Unique) (0x80, 0x04) W 19:58:26 Retrying (1 of 20)... W 19:58:26 Retry Failed - No Seek Complete W 19:58:26 Retrying (2 of 20)... I 19:58:26 Writing Image... W 19:59:11 Failed to Write Sectors 1990320 - 1990351 - Unknown (Vendor Unique) (0x80, 0x04) W 19:59:11 Retrying (1 of 20)... W 19:59:11 Retry Failed - No Seek Complete W 19:59:11 Retrying (2 of 20)... I 19:59:12 Writing Image... W 20:00:30 Failed to Write Sectors 1990960 - 1990991 - Unknown (Vendor Unique) (0x80, 0x04) W 20:00:30 Retrying (1 of 20)... W 20:00:30 Retry Failed - No Seek Complete W 20:00:30 Retrying (2 of 20)... I 20:00:31 Writing Image... W 20:01:13 Failed to Write Sectors 1991600 - 1991631 - Unknown (Vendor Unique) (0x80, 0x04) W 20:01:13 Retrying (1 of 20)... W 20:01:13 Retry Failed - No Seek Complete W 20:01:13 Retrying (2 of 20)... I 20:01:13 Writing Image... W 20:03:01 Failed to Write Sectors 1998608 - 1998639 - Unknown (Vendor Unique) (0x80, 0x04) W 20:03:01 Retrying (1 of 20)... W 20:03:01 Retry Failed - No Seek Complete W 20:03:01 Retrying (2 of 20)... I 20:03:02 Writing Image... W 20:03:53 Failed to Write Sectors 2000528 - 2000559 - Unknown (Vendor Unique) (0x80, 0x04) W 20:03:53 Retrying (1 of 20)... W 20:03:53 Retry Failed - No Seek Complete W 20:03:53 Retrying (2 of 20)... I 20:03:53 Writing Image... W 20:06:30 Failed to Write Sectors 2022800 - 2022831 - Unknown (Vendor Unique) (0x80, 0x04) W 20:06:30 Retrying (1 of 20)... W 20:06:30 Retry Failed - No Seek Complete W 20:06:30 Retrying (2 of 20)... I 20:06:30 Writing Image... W 20:08:03 Failed to Write Sectors 2024720 - 2024751 - Unknown (Vendor Unique) (0x80, 0x04) W 20:08:03 Retrying (1 of 20)... W 20:08:03 Retry Failed - No Seek Complete W 20:08:03 Retrying (2 of 20)... I 20:08:04 Writing Image... W 20:09:44 Failed to Write Sectors 2026640 - 2026671 - Unknown (Vendor Unique) (0x80, 0x04) W 20:09:44 Retrying (1 of 20)... W 20:09:44 Retry Failed - No Seek Complete W 20:09:44 Retrying (2 of 20)... I 20:09:44 Writing Image... W 20:10:21 Failed to Write Sectors 2027280 - 2027311 - Unknown (Vendor Unique) (0x80, 0x04) W 20:10:21 Retrying (1 of 20)... W 20:10:21 Retry Failed - No Seek Complete W 20:10:21 Retrying (2 of 20)... I 20:10:21 Writing Image... W 20:11:55 Failed to Write Sectors 2029200 - 2029231 - Unknown (Vendor Unique) (0x80, 0x04) W 20:11:55 Retrying (1 of 20)... W 20:11:55 Retry Failed - No Seek Complete W 20:11:55 Retrying (2 of 20)... I 20:11:56 Writing Image...
Looks like this is Imgburn, I can't help u here, but email entire log to Lightening UK at support at Imgburn.com (He coded it) and maybe he can answer your question
if i have had failures with nero and imgburn are there any other programs that might work for me? is there also any way to determine if my drive is malfunctioning when it comes to writing dual layer discs over single layer discs? the nero one looks like it failed after switching to the second layer and the imgburn failed right at 50% as i was at the computer when it started spinning the disc funny. if anyone has any more suggestions that would be great. thanks, joshua
Hi jhhjusa CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 5 ID 0 DMA: Off Turn DMA back on for the burner - here's a guide - link Disc Manufacturer ID: RITEK, Switch you dual layer disc to Verbatim. The burn is failing writing to the 2nd layer and these discs may not be compatible w/ your burner. For dual layer Verbatim is probably the most supported by the different drives firmware. Burn process failed at 6x Try 4x or 2.4x Give that a go and let us know.
do you have any recommendation as which burning program i should use nero/ingburn/sonic i checked the dma and followed the guide and all the selections are on dma if avalible.. all of the current transfer modes are showing as n/a
Check your controllers again. You'll see one maybe a seconardy ide controller that device 0 is listed as being in pio mode. Unisntall that one and reboot to correct it. ImgBurn is my preferred program for burning dual layer. Try that and lower the burn speed. Still failing then pick up some Verbatims.
i changed the controllers and rebooted. burned in imgburn..... here are the log files as it failed error message and what imgburn says about the disc I/O Error! Device:[5:0:0] HL-DT-ST DVDRRW GSA-H20L S742 (E (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CBD: 2A 00 00 20 1A 50 00 00 20 00 Interpretation: Write (10) - Sectors: 2103888 - 2103919 Sense Area: 70 00 03 00 00 00 00 0E 00 00 00 00 02 00 00 00 00 00 Interpretation: No Seek Complete HL-DT-ST DVDRRW GSA-H20L S742 (ATA) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2,054,864 Size: 4,208,361,472 bytes Time: 456:40:14 (MM:SS:FF) Supported Write Speeds: 4x, 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,870,864 Changeable: No TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2054863) -> LeadOut (LBA: 2054864) Physical Format Information (ADIP): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 14,893,743 Last Physical Sector in Layer 0: 2,067,471 Layer Information: Layer 0 Sectors: 1,870,864 (91.05%) Layer 1 Sectors: 184,000 (8.954%) imgburn log I 19:30:22 ImgBurn Version 2.3.2.0 started! I 19:30:22 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 19:30:22 Total Physical Memory: 981,484 KB - Available: 526,260 KB W 19:30:22 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 19:30:22 Initialising SPTI... I 19:30:22 Searching for SCSI / ATAPI devices... I 19:30:22 Found 1 CD-ROM and 1 DVD±RW/RAM! I 19:32:21 Operation Started! I 19:32:21 Source File: C:\DVD_VIDEO muppets\muppets season 1 disc 4\The Muppet Show S1D4.mds I 19:32:21 Source File Sectors: 3,701,984 (MODE1/2048) I 19:32:21 Source File Size: 7,581,663,232 bytes I 19:32:21 Source File Volume Identifier: muppets season 1 disc 4 I 19:32:21 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 19:32:21 Source File Implementation Identifier: ImgBurn I 19:32:21 Source File File System(s): ISO9660, UDF (1.02) I 19:32:21 Destination Device: [5:0:0] HL-DT-ST DVDRRW GSA-H20L S742 (E (ATA) I 19:32:21 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x) I 19:32:21 Destination Media Sectors: 4,173,824 I 19:32:21 Write Mode: HD DVD I 19:32:21 Write Type: DAO I 19:32:21 Write Speed: 2.4x I 19:32:21 Link Size: Auto I 19:32:21 Test Mode: No I 19:32:21 BURN-Proof: Enabled I 19:32:21 Optimal L0 Data Zone Capacity: 1,870,864 I 19:32:21 Optimal L0 Data Zone Method: Copied From Original Disc I 19:32:21 Filling Buffer... (20 MB) I 19:32:22 Writing LeadIn... I 19:32:49 Writing Image... (LBA: 0 - 3701983) I 19:32:49 Writing Layer 0... (LBA: 0 - 1870863) I 19:42:10 Writing Layer 1... (LBA: 1870864 - 3701983) W 19:43:29 Failed to Write Sectors 1948368 - 1948399 - Unknown (Vendor Unique) (0x80, 0x04) W 19:43:30 Retrying (1 of 20)... W 19:43:30 Retry Failed - No Seek Complete W 19:43:30 Retrying (2 of 20)... I 19:43:30 Writing Image... W 19:45:39 Failed to Write Sectors 2054864 - 2054895 - Unknown (Vendor Unique) (0x80, 0x04) W 19:45:39 Retrying (1 of 20)... W 19:45:39 Retry Failed - No Seek Complete W 19:45:39 Retrying (2 of 20)... I 19:45:39 Writing Image... W 19:46:30 Failed to Write Sectors 2103888 - 2103919 - No Seek Complete W 19:46:30 Retrying (1 of 20)... W 19:46:30 Retry Failed - Invalid Address For Write W 19:46:30 Retrying (2 of 20)... W 19:46:30 Retry Failed - Invalid Address For Write W 19:46:30 Retrying (3 of 20)... W 19:46:30 Retry Failed - Invalid Address For Write W 19:46:30 Retrying (4 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (5 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (6 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (7 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (8 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (9 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (10 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (11 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (12 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (13 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (14 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (15 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (16 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (17 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (18 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (19 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:46:31 Retrying (20 of 20)... W 19:46:31 Retry Failed - Invalid Address For Write W 19:50:45 Retrying (21)... W 19:50:45 Retry Failed - Invalid Address For Write W 19:50:47 Retrying (22)... W 19:50:47 Retry Failed - Invalid Address For Write W 19:50:47 Retrying (23)... W 19:50:47 Retry Failed - Invalid Address For Write W 19:50:48 Retrying (24)... W 19:50:48 Retry Failed - Invalid Address For Write W 19:50:48 Retrying (25)... W 19:50:48 Retry Failed - Invalid Address For Write W 19:50:48 Retrying (26)... W 19:50:48 Retry Failed - Invalid Address For Write W 19:50:49 Retrying (27)... W 19:50:49 Retry Failed - Invalid Address For Write W 19:50:49 Retrying (28)... W 19:50:49 Retry Failed - Invalid Address For Write W 19:50:49 Retrying (29)... W 19:50:49 Retry Failed - Invalid Address For Write W 19:50:50 Retrying (30)... W 19:50:50 Retry Failed - Invalid Address For Write W 19:50:50 Retrying (31)... W 19:50:50 Retry Failed - Invalid Address For Write W 19:50:50 Retrying (32)... W 19:50:50 Retry Failed - Invalid Address For Write W 19:50:50 Retrying (33)... W 19:50:50 Retry Failed - Invalid Address For Write W 19:50:51 Retrying (34)... W 19:50:51 Retry Failed - Invalid Address For Write W 19:50:51 Retrying (35)... W 19:50:51 Retry Failed - Invalid Address For Write W 19:50:51 Retrying (36)... W 19:50:51 Retry Failed - Invalid Address For Write W 19:50:51 Retrying (37)... W 19:50:51 Retry Failed - Invalid Address For Write W 19:50:51 Retrying (38)... W 19:50:51 Retry Failed - Invalid Address For Write W 19:50:51 Retrying (39)... W 19:50:51 Retry Failed - Invalid Address For Write W 19:50:52 Retrying (40)... W 19:50:52 Retry Failed - Invalid Address For Write W 19:50:52 Retrying (41)... W 19:50:52 Retry Failed - Invalid Address For Write W 19:50:52 Retrying (42)... W 19:50:52 Retry Failed - Invalid Address For Write W 19:50:52 Retrying (43)... W 19:50:52 Retry Failed - Invalid Address For Write W 19:50:53 Retrying (44)... W 19:50:53 Retry Failed - Invalid Address For Write E 19:50:53 Failed to Write Sectors 2103888 - 2103919 - No Seek Complete I 19:50:53 Synchronising Cache... I 19:50:54 Closing Track... I 19:52:08 Finalising Disc... E 19:52:34 Failed to Write Image! E 19:52:34 Operation Failed! - Duration: 00:20:13 I 19:52:34 Average Write Rate: 3,881 KB/s (0.8x) - Maximum Write Rate: 8,428 KB/s (1.8x) any other thoughts?
It's now time to switch the media. Looks like these are not compatible w/ your drive. Buy Verbatim dual layer only. If those don't then looks like this drive needs to be replaced to burn dual layer - still under warranty by chance?
i went and bought some verbatim DVD+R DL 2.4X/8.5GB discs from staples and iso'd the shrek 2 ts files. no problems at all with the burn and the disc works great. the only issue i have is that it cost $17 for three of them...... now i am going to have to try and return the memorex to best buy..... any suggestions and or arguments to help me get my money back? thanks for your help, joshua I 10:41:14 ImgBurn Version 2.3.2.0 started! I 10:41:14 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 10:41:14 Total Physical Memory: 981,484 KB - Available: 532,288 KB W 10:41:14 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 10:41:14 Initialising SPTI... I 10:41:14 Searching for SCSI / ATAPI devices... I 10:41:14 Found 1 CD-ROM and 1 DVD±RW/RAM! I 10:46:23 Operation Started! I 10:46:23 Building Image Tree... I 10:46:30 Checking Directory Depth... I 10:46:30 Calculating Totals... I 10:46:30 Preparing Image... I 10:46:53 Using Layer Break LBA: 2043960 -> 2043968 (VTS_06, PGC: 17, Chapter: 1, Cell: 1, Vob/Cell ID: 2/42, Time: 00:00:00, SPLIP: No) I 10:46:53 Checking Path Length... I 10:46:53 Image Size: 8,090,353,664 bytes I 10:46:53 Image Sectors: 3,950,368 I 10:46:56 Operation Successfully Completed! - Duration: 00:00:33 I 10:46:56 Operation Started! I 10:46:56 Image Contents: 66 Files, 2 Folders I 10:46:56 Image Sectors: 3,950,368 I 10:46:56 Image Size: 8,090,353,664 bytes I 10:46:56 Image Layer Break Position: 2,043,968 I 10:46:56 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496) I 10:46:56 Image Double Layer Profile: DVD+R DL (Min L0: 0, Max L0: 2,086,912, Media Capacity: 4,173,824) I 10:46:56 Image Volume Identifier: SHREK_2 I 10:46:56 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 10:46:56 Image Implementation Identifier: ImgBurn I 10:46:56 Image File System(s): ISO9660, UDF (1.02) I 10:46:56 Destination File: H:\movies\SHREK_2\Shrek 2.iso I 10:46:56 Destination Free Space: 55,809,556,480 bytes (54,501,520 KB) (53,224 MB) (51 GB) I 10:46:56 Destination File System: NTFS I 10:46:56 File Splitting: Auto I 10:46:57 Writing Image... I 10:56:16 Image MD5: 7c951f07e12cc8e64234b9d0a07703b1 I 10:56:16 Operation Successfully Completed! - Duration: 00:09:19 I 10:56:16 Average Write Rate: 14,133 KB/s (10.2x) - Maximum Write Rate: 28,733 KB/s (20.7x) I 11:00:18 Operation Started! I 11:00:18 Source File: H:\movies\SHREK_2\Shrek 2.mds I 11:00:18 Source File Sectors: 3,950,368 (MODE1/2048) I 11:00:18 Source File Size: 8,090,353,664 bytes I 11:00:18 Source File Volume Identifier: SHREK_2 I 11:00:18 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 11:00:18 Source File Implementation Identifier: ImgBurn I 11:00:18 Source File File System(s): ISO9660, UDF (1.02) I 11:00:18 Destination Device: [5:0:0] HL-DT-ST DVDRRW GSA-H20L S742 (E (ATA) I 11:00:18 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 11:00:18 Destination Media Sectors: 4,173,824 I 11:00:18 Write Mode: HD DVD I 11:00:18 Write Type: DAO I 11:00:18 Write Speed: 2.4x I 11:00:18 Link Size: Auto I 11:00:18 Test Mode: No I 11:00:18 BURN-Proof: Enabled I 11:00:18 Optimal L0 Data Zone Capacity: 2,043,968 I 11:00:18 Optimal L0 Data Zone Method: Copied From Original Disc I 11:00:28 Filling Buffer... (20 MB) I 11:00:28 Writing LeadIn... I 11:00:50 Writing Image... (LBA: 0 - 3950367) I 11:00:50 Writing Layer 0... (LBA: 0 - 2043967) I 11:22:30 Writing Layer 1... (LBA: 2043968 - 3950367) I 11:42:18 Synchronising Cache... I 11:42:54 Closing Track... I 11:43:53 Finalising Disc... I 11:45:29 Image MD5: 7c951f07e12cc8e64234b9d0a07703b1 I 11:45:29 Operation Successfully Completed! - Duration: 00:45:11 I 11:45:29 Average Write Rate: 3,176 KB/s (0.7x) - Maximum Write Rate: 3,516 KB/s (0.8x) I 11:45:29 Cycling Tray before Verify... W 11:45:39 Waiting for device to become ready... I 11:46:10 Device Ready! I 11:46:10 Operation Started! I 11:46:10 Source Device: [5:0:0] HL-DT-ST DVDRRW GSA-H20L S742 (E (ATA) I 11:46:10 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x) I 11:46:10 Image File: H:\movies\SHREK_2\Shrek 2.mds I 11:46:10 Image File Sectors: 3,950,368 (MODE1/2048) I 11:46:10 Image File Size: 8,090,353,664 bytes I 11:46:10 Image File Volume Identifier: SHREK_2 I 11:46:10 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 11:46:10 Image File Implementation Identifier: ImgBurn I 11:46:10 Image File File System(s): ISO9660, UDF (1.02) I 11:46:10 Verifying Sectors... (LBA: 0 - 3950367) I 11:46:10 Verifying Layer 0... (LBA: 0 - 2043967)
Yep the biggest arguement would be that they don't work. Most best Buys are pretty good about taking back stuff if it's in the 30 day period and w/ a receipt. Plus you can also add that you bought Verbatim and they work. Verbatim DL media goes on sale every once in while so check the Sunday sale ads to see when they are on sale. Glad they worked!
what i am doing right now is shrinking the same iso file down to a 4.7 and burning it to see if there are large differences. if not i'll stick with the DVD+R and leave the dual layers for special occasions ;-)
