I have been unable to successfully copy ant DVD movie. Here is my log file: 8K24-4225-1105-EKK5-5000-0021-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.1.1.4 Internal Version: 8, 1, 1, 4 (Nero Express) Recorder: <MATSHITA BD-MLT SW-5582> Version: B102 - HA 1 TA 0 - 8.1.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <SONY DVD-ROM DDU1615 >Version: FFR1 - HA 1 TA 1 - 8.1.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : MATSHITA BD-MLT SW-5582 atapi Port 0 ID 0 DMA: Off CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 1 DMA: Off DiskPeripheral : Maxtor 7L300S0 iaStor Port 1 ID 0 DMA: On DiskPeripheral : WDC WD2500KS-00MJB0 iaStor Port 1 ID 1 DMA: Off === CDRom-Device-Map === MATSHITA BD-MLT SW-5582 E: CdRom0 SONY DVD-ROM DDU1615 F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095224kB) Free physical memory: 1480MB (1515984kB) Memory in use : 27 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.12.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 8:47:47 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:48:08 PM #2 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 8:48:08 PM #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD+R S01 T01 Con 0x14 Start 0 Len 2165264 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 8:48:08 PM #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2165264 = 2165264, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 8:48:08 PM #5 Text 0 File Burncd.cpp, Line 3530 Turn on Disc-At-Once, using DVD media 8:48:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2165263 (481:10.13, 4229MB) 8:48:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 8:48:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:48:08 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2165264 (2165264) = #2165264/481:10.14 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2165264 blocks [Image Recorder] -------------------------------------------------------------- 8:48:08 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4434460672, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2165264 | 2165264 | 0x00 2165264 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 8:48:08 PM #11 Text 0 File Burncd.cpp, Line 4316 Caching options: cache CDRom or Network-No, small files-No (<64KB) 8:48:08 PM #12 Phase 120 File dlgbrnst.cpp, Line 1764 Creating the image for burning 8:48:08 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2735 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:48:08 PM #14 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 590400 9:19:27 PM #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 2165264 (210A10h), length 0 blocks 9:19:27 PM #16 Phase 121 File dlgbrnst.cpp, Line 1764 Creating Image completed successfully 9:19:27 PM #17 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:19:31 PM #18 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:19:31 PM #19 Text 0 File Cdrdrv.cpp, Line 11276 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 9:19:31 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:19:32 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4434460672 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Don Bitner\My Documents\TempImage.nrg> 9:19:32 PM #3 Text 0 File Burncd.cpp, Line 3530 Turn on Disc-At-Once, using DVD media 7:02:09 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2165263 (481:10.13, 4229MB) 7:02:09 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 7:02:09 AM #6 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: MATSHITA BD-MLT SW-5582, Media type: DVD+RW Disc Manufacturer ID: <PHILIPS>, Media Type ID: <041>, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 7:02:09 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.) This disc is not empty. (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.) Accessing disc... (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.) 7:02:10 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2165264 (2165264) = #2165264/481:10.14 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2165264 blocks [E: MATSHITA BD-MLT SW-5582] -------------------------------------------------------------- 7:02:10 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [E: MATSHITA BD-MLT SW-5582] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4434460672, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2165264 | 0 | 0x00 2165264 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 7:02:30 AM #10 Text 0 File SCSIPTICommands.cpp, Line 264 Error on LockVolume: Access is denied. 7:02:30 AM #11 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:02:32 AM #12 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 7:02:32 AM #13 Text 0 File Burncd.cpp, Line 4316 Caching options: cache CDRom or Network-No, small files-No (<64KB) 7:02:32 AM #14 Phase 36 File dlgbrnst.cpp, Line 1764 Burn process started at 4x (5,540 KB/s) 7:02:34 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:02:34 AM #16 Text 0 File Cdrdrv.cpp, Line 10026 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: PHILIPS. Media type ID: 041 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..783]: 00 00 01 50 48 49 4C 49 - 50 53 00 30 34 31 00 39 ...PHILIPS.041.9 23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{ 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 01 00 17 38 00 28 8B 46 - 02 2C 00 2E 8A 3A 02 2C ...8.(.F.,...:., 00 2C 8C 3C 02 2C 28 35 - 50 00 20 00 40 20 00 00 .,.<.,(5P...@... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:02:34 AM #17 SPTI -1066 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x04a8a940: Len x648 7:02:34 AM #18 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 7:02:34 AM #19 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 7:25:10 AM #20 SPTI -1 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x03 Sense Qual: 0x01 CDB Data: 0x2A 00 00 18 1B E0 00 00 20 00 00 00 Sense Area: 0xF1 00 04 00 18 1B 70 0A 00 38 01 02 03 01 Buffer x0aa2cb00: Len x10000 0x00 00 01 BA 44 C4 7D 1B 6D AD 01 89 C3 F8 00 00 0x01 E0 07 06 81 00 00 07 6F 9F 7C CB 84 E0 B2 70 0x9A 97 FB 3C E4 CC B1 FE 5A F0 E8 34 21 57 E9 84 7:25:10 AM #21 CDR -1 File Writer.cpp, Line 306 Unspecified Recorder Error E: MATSHITA BD-MLT SW-5582 7:25:10 AM #22 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 1580000 7:25:10 AM #23 Phase 38 File dlgbrnst.cpp, Line 1764 Burn process failed at 4x (5,540 KB/s) 7:25:10 AM #24 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:25:13 AM #25 Text 0 File Cdrdrv.cpp, Line 11276 DriveLocker: UnLockVolume completed 7:25:13 AM #26 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
