|
Xbox 360 Mod/Hack FAQ
|
|
Member
1 product review
|
28. August 2007 @ 16:47 |
Link to this message
|
|
@ theridges
Ya I tried that several times, wouldnt boot from the usb stick. with hd, etc unplugged.
I did find a way to make a ntfsiso boot disk, that worked. When I got to the idump screen. I only got two options primary and secondary. no third option from via sata card. So I didnt try to flash it.
I wonder if the drivers are even installed on mobo for sata. (4 onboard sata ports)
Im gonna try that tomorrow
|
|
Advertisement
|
 |
|
|
Member
1 product review
|
4. September 2007 @ 05:00 |
Link to this message
|
|
Ok I finally got it to find my via vt6421 card. Enabled it by switching to Legacy mode in Bios.
Im having trouble dumping my original fw. I start idump, and it hangs up on 1%. I tried it several times and it wont get past 1%. So I stopped there, not gonna chance bricking it.
Any ideas on what to do?
|
AfterDawn Addict
1 product review
|
4. September 2007 @ 08:59 |
Link to this message
|
|
has your drive been flashed before??
anyways try the 10 second trick for dumping the firmware....
that means when it says 1% turn the 360 off and count to 10 and then turn it back on and see if it continues the dump..
if not i have no clue..
|
Member
1 product review
|
9. September 2007 @ 06:21 |
Link to this message
|
|
Wooo Hooo!
Got it Flashed successfully. Chose quiet mode fw, (instead of fast mode fw) Then used iprep to save ixtreme fw to usb stick. Ty for your help Ridges.
|
|
Loochy323
Member
|
11. September 2007 @ 15:12 |
Link to this message
|
|
when this was fist posted you said you could play on xbl live,is that still true with backups now? like are there any hidden updates that'll mess it up?
Insert clever sig here
|
AfterDawn Addict
1 product review
|
11. September 2007 @ 19:17 |
Link to this message
|
|
right now you can play on XBL safe as far as i know...
This message has been edited since posting. Last time this message was edited on 11. September 2007 @ 19:18
|
|
pnjb1zfin
Newbie
|
16. September 2007 @ 07:12 |
Link to this message
|
|
|
Member
1 product review
|
16. September 2007 @ 12:11 |
Link to this message
|
|
|
pnjb1zfin
Newbie
|
16. September 2007 @ 12:41 |
Link to this message
|
|
Thanks burnin1.
You sure it works though? One of the reviews says it doesn't always work...
|
AfterDawn Addict
1 product review
|
16. September 2007 @ 12:46 |
Link to this message
|
|
if the person knows what there doing it works...
if not i can flash the drive :)
|
|
pnjb1zfin
Newbie
|
16. September 2007 @ 13:15 |
Link to this message
|
|
Thanks for the responses guys, I greatly appreciate it.
For that chipset, is it easy to install in your computer?
A few more though, sorry!:
Do I need a specific drive on my computer to burn games (I mean backup my games ;)) ? I know you need a DL DVD burner, but is there a specific kind I NEED?
Is it true I need a floppy drive?
Would I have to open up my xbox 360 every time to make a new disc?
Someone please help me out.
|
Member
1 product review
|
16. September 2007 @ 14:22 |
Link to this message
|
|
Just use theridges guide on the first page and u should be good to go.
I use a SH-D162C flash with kreon Fw. and works great with xbox creator 2.4
|
AfterDawn Addict
1 product review
|
17. September 2007 @ 15:33 |
Link to this message
|
|
no you dont need a Floppy if you have a usb stick that would be better....
|
|
pnjb1zfin
Newbie
|
22. September 2007 @ 10:37 |
Link to this message
|
|
Thanks.
Is there a specific DVD Drive I need? I know it has to be a double layer DVD Drive, but any specific company?
|
AfterDawn Addict
1 product review
|
22. September 2007 @ 17:20 |
Link to this message
|
the pioneer 111D is the one most people like because it is very consistent and gives great burns....but i use an HP and still haven't had a coaster
|
|
GRAYGOOZE
Newbie
|
22. September 2007 @ 20:23 |
Link to this message
|
|
I just wanted to know if anybody had the stealth mod, and if they were still online with it?
|
|
pnjb1zfin
Newbie
|
23. September 2007 @ 08:25 |
Link to this message
|
Originally posted by theridges:
the pioneer 111D is the one most people like because it is very consistent and gives great burns....but i use an HP and still haven't had a coaster
Does it specifically have to be those, or can it be any DL DVD burner?
Will any of these work fine?
http://www.newegg.com/Product/ProductLis...cription=27-129
Thanks.
This message has been edited since posting. Last time this message was edited on 23. September 2007 @ 09:26
|
AfterDawn Addict
1 product review
|
23. September 2007 @ 19:24 |
Link to this message
|
Originally posted by GRAYGOOZE:
I just wanted to know if anybody had the stealth mod, and if they were still online with it?
i do and i play online everyday...
|
AfterDawn Addict
1 product review
|
23. September 2007 @ 19:26 |
Link to this message
|
Originally posted by pnjb1zfin:
Originally posted by theridges:
the pioneer 111D is the one most people like because it is very consistent and gives great burns....but i use an HP and still haven't had a coaster
Does it specifically have to be those, or can it be any DL DVD burner?
Will any of these work fine?
http://www.newegg.com/Product/ProductLis...cription=27-129
Thanks.
i believe any of them should work...
|
Senior Member
2 product reviews
|
26. September 2007 @ 04:52 |
Link to this message
|
|
ok, so after doing everything I not that my desktop will not boot from the USB. I check my laptop and it does. So i ordered a laptop SATA card. My question is are there any SATA cables inside the laptop like there are in a desktop that I should be worried about unhooking? The manual said to unplug all other SATA cables. The desktop was easy but the laptop wouldnt be being ive never opened a laptop.
|
|
beeger
Newbie
|
27. September 2007 @ 01:00 |
Link to this message
|
|
i was just wondering if i need the sata card if i had a sata motherboard, thinking about doing this myself
bj simpson
|
|
beeger
Newbie
|
27. September 2007 @ 01:05 |
Link to this message
|
|
also iam running vista is that a problem?
bj simpson
|
AfterDawn Addict
1 product review
|
27. September 2007 @ 03:41 |
Link to this message
|
Originally posted by beeger:
i was just wondering if i need the sata card if i had a sata motherboard, thinking about doing this myself
you need to read...
some sata mobo are compatible some aren't use the search tool..
|
AfterDawn Addict
1 product review
|
27. September 2007 @ 03:42 |
Link to this message
|
Originally posted by beeger:
also iam running vista is that a problem?
i dunno i dont think it would have any issues for samsung drives but maybe for hitachi's...
|
|
Advertisement
|
|
|
Senior Member
2 product reviews
|
27. September 2007 @ 08:17 |
Link to this message
|
|
ok, so after doing everything I not that my desktop will not boot from the USB. I check my laptop and it does. So i ordered a laptop SATA card. My question is are there any SATA cables inside the laptop like there are in a desktop that I should be worried about unhooking? The manual said to unplug all other SATA cables. The desktop was easy but the laptop wouldnt be being ive never opened a laptop.
|
