Hello Chaps, i have just modded my xbox with the X-BIT 2mb flash chip and it was suprisingly easy! the only problem i have is that i need the Evox prog with the Slayer 2.5 installer. Can anyone help me get this? I have also had a 120gb hdd recently delivered but want to mess about with the retail one first. Any help much appreciated. Thanks.
hey, if you want slayers, first get mIRC. its an irc (chat) program. once you download it, install it, and make a new server: snoop.burghcom.net (if that doesn't work, try .com instead of .net). anyways, log onto the server and type #slayers as the channel you wish to join. pretty soon, a new chat room should open. when you're in this chat room, send this message: !installer <----if you did this right, it should start sending you a file. if not, then ask the people in that room how to download it. usually, if you can't get it, it's just some settings that need to be changed.
oh by the way, how is the xbit? im thinking about getting one, but before i get it i want to know all the potential risks and such. when i got my chameleon mod, it had problems, and i saw other ppl had the same probs, so if anybody knows of any existing probs with XBIT, let me know.
OK heres a good story "So Far" I have the Xbit 2MB chip intalled Solderless."Very Very Easyly Done =7) I flashed it useing the suppled USB cable and Xbit.exe. "Xbit.exe does not come with it =7( " I flashed EVOX 2.4 on to the Chip "So far no problems" Then i made a BootDisc "useing the noob guid for every thing as a guide" . Easy as pie. This i got evox to load up useing the disc....."Now HERE IS WHERE THE PROBLEM IS. I FTP to the xbox using a router and i do connect but the conection fails because of login or password is not right... i was told to use L/P:xbox/xbox Heres a copy of the INI File [Network] SetupNetwork = Yes StaticIP = No Ip = 192.168.0.3 Subnetmask = 255.255.255.0 Defaultgateway = 192.168.0.1 DNS1 = 0.0.0.0 DNS2 = 0.0.0.0 [Clock] JumpToMsDash = No JumpIfNoLink = Yes SNTP_Server = 216.244.192.3 [FTP] Enable = Yes Password = xbox [RDTOOLS] Enable = Yes Name = EvoX [BIOS] Please help me out thanks !!!!
[ SetupNetwork = Yes StaticIP = No Change this to YES Ip = 192.168.0.3 Subnetmask = 255.255.255.0 Defaultgateway = 192.168.0.1 DNS1 = 0.0.0.0 DNS2 = 0.0.0.0 ]
Ok i changed the static in the ini file to yes and tryed the same thing with no luck then. Then i tryed useing a crossover cable with out useing my router and no luck. Then i changed my INI file back to static no and rehooked every thing back up useing my router and i noticed that on all of the help pages say to use 192.168.0.3 and that was the ip i was pinging but after looking at the evox dashboard setings i noticed at differnt ip was there 192.168.0.143 when i used that ip every thing worked great =7) .. I think my router gave that ip to the xbox.. So that problem is fixed Now i have a other question.. in the xbox c drive i have to rename the xboxdash.xbe to msxboxdash.xbe now rename the default.xbe file to xboxdash.xbe wont this mess up the xbox when you boot up with the chip off??? i havent tryed it yet wanted feed back first. Thank you.
It depends on what bios you use. I use 4981.06, and it looks for evoxdash.xbe first and then some others, so I have on C-drive following xbe:s evoxdash.xbe (evox) and xboxdash.xbe (original)
ok im running this bios EvoX V2.4 and dashsoftware is EvolutionX beta 1.8.2594 how do i know what it looks for? And also is this the most uptodate bios? and in the ini file does this have anything to do with it? [RDTOOLS] Enable = Yes Name = EvoX Thanks
check these out: http://www.xbox-scene.com/bios_retail.html http://www.xbox-scene.com/tutorials.php?t=0,0,0,0,0,0,0,0,0,1,0,0
Thanks that was very helpful =7) Got it up and running i changed the bios useing xecuter2 4981 now.. Now im haveing problems getting apps to show up ill take a look at the forums to see if i get any answers. "Like a good lil NooB" Thanks =7)
