hi tried these codes for telewest found on post dont thank me for them 00 CC-D8-15-96-6C-6E-F0-D9 01 CB-D6-3B-B6-17-F3-41-98 good luck
No problem Tony it just the fact that they have changed four times today and all the codes been posted was leading to confusion, suffice to say they are the latest ones, lets hope they dont change again
Yep can be a pain alright. Why not just update the firmware and it will auto update the keys for you?
iam going to get a modem cable didnt think i really needed one but if it stops sorting channels eveytime codes go off it will be well worth it
All the info you need can be found here Tony You will need a null modem cable DB9F to DB9F Like this one Null modem info here http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6 Make sure your USB adapter is a USB to serial port adapter similar to this one. USB Adapter info here http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor These two cable links are only for reference as they can be purchased alot cheaper on fleabay. All firmware/loader can be found in the link at the end of my post marked Eamos FTA Library. You will need the GTromloader, (Starview Software Uploader), found in the Starview folder of the link. You will need version 2.57 fixed for a CLONE box You will need version 4.oo for a GENUINE box. Both of these can be found in the Starview Firmware Folder of the link. To help you decide which type of box you have click on the link at the end of my post marked SV EV Info, then click on clones, this will help you figure out what you have. And please download the Starview PDF guide this will give you step by step instructions on how to do everything.This can be found in the Starview Documentation folder in the link.
codes have changed again any ideas on what they are tw west midlands i am on have gone thru 3 diferent codes so far today help please
00- 3B-BE-CE-6D-F4-73-4A-4B 01- CB-D6-3B-B6-17-F3-41-98 However I do recommend updating your firmware as per the above instruction, this is the fifth time they have changed today.
Hi. Could someone please show me what the codes should be for all 3 providers so I can check mine. Mine went down this morning and I tried to put some codes in, but may have put it on the wrong one!! I know I'm and idiot!!!! Thanks very much
Why do you have to sort your channels out when a code change happens , you dont need to do a factory settting or a new scan , just change the key data codes and save them and you will still have all your channels in order
Scouser, Great work done......i have got the new working code for the Te****T area....works fine bur gave me only 256 channels....and would you mind to PM me about firmware update...i really want to get rid of the changing code thing.....want an autoupdate.. Thanks in advance
look at the end of scousers post, the links are there on how to do it and the software All people have to do is load their boxs with the correct software and thats it, no more looking for codes. Its simple to do and once done, sit back and relax. Every one has access to the internet and PC, so there is no excuse for not doing it. We all know someone in this day and age who are computer literate, that if you cant do it yourself some one can. I dont know if its people are afraid to do it or laziness. The CC's are going to be doing this ongoing, just look at the last few days.
