Help, I have a machine which does not recognise the remote and only operates from the local control on the receiver. The fault happend after I screwed up accessing "HDD Mode Change" in the Main Menu.I have connected my PC via USB lead with software disc ready, however when asked to input the 0-0-0-0 code the remote is not recognised by the receiver and the local control buttons do not have the facility to put this code in.
Presume you checked the batteries in the remote. If you have a mobile phone with camera, switch it to camera mode. Point the remote at the camera lens, and you should see the infra-red LED flashing on the screen. If you don't see it flashing, then yes, the remote is dead
Originally posted by mtglass: Help, I have a machine which does not recognise the remote and only operates from the local control on the receiver. The fault happend after I screwed up accessing "HDD Mode Change" in the Main Menu.I have connected my PC via USB lead with software disc ready, however when asked to input the 0-0-0-0 code the remote is not recognised by the receiver and the local control buttons do not have the facility to put this code in.
Hi mtglass
There is a 'make me dead' button on the PVR remote, don't ask me why but:
Press Aux = Kills remote : Press STB = Brings back remote.
Try it. Got me scratching mine did that one.
jbvid
I'm still strugling to record anything to the HDD.
Could you suggest how to do this or advise anything I need to download to do so.
Regards & thanks for taking the time, mtglassHi
As you are still struggling go here (ie click on the link)
http://eko.4shared.com/ Look in the Starview_PVR folder then Documents folder
Then Download and Have a GOOD read of the usefull info in there, Print it out read it again and it will become plain sailing for you.
jbvid
Hi jbvideo,
Thanks for the advice, will have a go downloading & using the information you suggested, thanks again for your time.
Oh & here's your big X Cheers, mtglass
