1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

modded xbox

Discussion in 'Xbox - Hardware boot discussion' started by markeh, Mar 14, 2008.

  1. markeh

    markeh Member

    Joined:
    Mar 14, 2008
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    11
    i have an xbox that was originaly giving error code 07 as it had been dropped which ive since had a modchip installed.
    now when you turn it on all you get is a blank screen as it still has the original drive installed.
    can anyone tell me how i go on from here as i have a larger drive id like to install and a copy of slayers evox just lost as to what to do next.
    your help would be appreciated
     
    markeh, Mar 14, 2008
    #1
  2. C4RN1

    C4RN1 Regular member

    Joined:
    Feb 14, 2008
    Messages:
    1,212
    Likes Received:
    1
    Trophy Points:
    48
    get a stock C: and build an eeprom reader. http://forums.afterdawn.com/thread_view.cfm/357863

    i would take the mod chip off and just use the stock bios.
    Then use xboxhdm to format a new drive. Put the new drive in and mod it. Sounds pretty simple but it will be some work.

    good luck, if u have any questions i'm always around these forums.

    Lata
     
    C4RN1, Mar 14, 2008
    #2
  3. DLyon4

    DLyon4 Regular member

    Joined:
    Oct 11, 2007
    Messages:
    132
    Likes Received:
    0
    Trophy Points:
    26
    Or since you have a chip installed you don't need the eeprom. Just download AID 4.10 from here: ( I assume you understand torrents).

    http://forums.afterdawn.com/thread_view.cfm/557450#3371151

    Make the disk, install your new big HDD, install the AID4.10 disk and go to format HDD and it will do the rest. You don't need the eeprom or the original image to upgrade after chipped. You can even install a clean M$ dash so you can do M$ dash things :). Now, you can never go back to a stock console after this, because you won't have a matched console/HDD, but hey you're up and running.
     
    DLyon4, Mar 14, 2008
    #3
  4. C4RN1

    C4RN1 Regular member

    Joined:
    Feb 14, 2008
    Messages:
    1,212
    Likes Received:
    1
    Trophy Points:
    48
    ok so here's my question to you DLyon4

    How can he use the mod chip if he sees a blank screen when he turns it on? You would see a different bios boot instead of the "flubber screen" and it would give you options. So how exactly does that work cuz now i'm confused.

    I guess if ur mod chip is working then go that route, i assumed a black screen ment bad install or bad chip.
     
    Last edited: Mar 14, 2008
    C4RN1, Mar 14, 2008
    #4
  5. varnull

    varnull Guest

    Black screen in this case just means the chip flashing bios isn't enabled. (flashbios 3.0.3)

    Enable bios flash, and make sure you have a bios that is suitable for your chip all ready and raring to go on a cd-rw or dvd-r for when it asks you for it.

    You should be able to find a bios on slayers disk which you can extract and use to make a bios flashing disk.. PM me if you are stuck for a bios.., though it would help to know what chip you have fitted as the bios files are different sizes.
     
    varnull, Mar 14, 2008
    #5

Share This Page