Hi, got a starview and trying to update with gta loader,done many times with clone and original boxs and had no probs. but now it doesnt download and comes up with download failed?? Am i missing something or could it be a faulty box...many thanks
If the box will NOT RE-FLASH as normal from on or standby, try this but it may take a few goes to work. Connect the box to the pc with your cable but switch it off at the back. Load the correct firmware bin file into GTRom & set it to the correct com port, and select App file only then hit Download. Only then switch on at the back to power on the box. It may take a few sec. so wait at least 30 sec. (If it doesn't work 1st time try also waiting a couple of sec. to switch on after pressing download in the loader.) It may take more than 1 try to work, but eventually you'll see the loader kick in and the % bar increase. You won't see the % on the Starview though. Only green lines moving left to right. Towards the end of the flash you'll see a message in GTRom saying FLASH BURNING. Then it will reach 100% and wait for the download complete pop up box to appear & the box will reboot back to factory setup. You will have lost any channel data previously on the box & will need to rescan & switch on EMU and set the box up from scratch.
