Help Me:(

I Just Factory Setting My Starview Super Box, Now When I Scan It Picks Up All The Channels Even Though I Put The EMU On. It Says Scrambled Or Bad Channel On All The Channels, But The Free Channels Come. I've Also Updated The Box When I Thought I Had To Update It, But That Wasn't The Fault As The Same Thing Happens. I've Also Realised That When I Go Into The Nagravision The Code There FF Everywhere! And In Provider Its Blank

Please Can Someone Help Me:( Missing Out All My Favourite Shows:(

Thanks

Factory reset and scan again, make sure on the correct provider

Sorry Mick stepping all over your toes, pressing the default key will get rid of the FF problem in the CAS screen.

Sorted now, but why did my CAS system do this for? Thank You Once Again

Sorry folks for this if its stupid question. but there is a new menu in starview 3 that should list movies sports etc but they are all over the place is it poss to organise them. I switched from original box to a eurovox but the bloody thing is locked up each day upgrading . i have updated codes but the hoors keep changing them. am back to starview 3 seems better at adjusting eave though the other one is barnded as superior. will there be a firmware upgrade for e vox ?

Originally posted by mocall:

---

Sorry folks for this if its stupid question. but there is a new menu in starview 3 that should list movies sports etc but they are all over the place is it poss to organise them. I switched from original box to a eurovox but the bloody thing is locked up each day upgrading . i have updated codes but the hoors keep changing them. am back to starview 3 seems better at adjusting eave though the other one is barnded as superior. will there be a firmware upgrade for e vox ?

---

The fix for Eurovox's is out as is starvi** 1 fix yo will find all you need here dated 10/04/08

Eamo's Library - http://eko.4shared.com/

hi,hoping that somebody can help, i have a starview original for about a year now, all has been great until last night when i decided to upgrade the firmware to version 4.o. everything went fine until i went to tune in the channels, it tuned in 138 channels (ok), but only about 34 channels actually work the rest are scrambled. i did a factory reset and checked the emu, and rescanned a few times but to no avail. can anybody help ? Thanks in advance

ne 1 got same problem of eurovox not being recognized through rs232 plz

a shud add that its a eurovox 2006 upgraded to 2007 blue box

thanks

andy

can i just add to this in asking if there are clones of eurovox blue and red boxes pls, and if there are, how can i tell please

thanks again

JUST TO LET YOU ALL KNOW OUT THERE IS NO CLONE SAFE STARVIEW 1 FIRMWARE OUT THERE ANYWHERE THERE IS A FAKE FILE RENAMED AS CLONE SAFE THAT IS ALL IT IS THE V4.00 RENAMED AND THE TUT HAS ALSO BEEN EDITED TO BRING THE AUTHOR OF THE NEW FIXED V4.01 DOWN SO YOU ALL KNOW NOW IF YOU USE THIS FILE YOUR BOX WILL DIE IF YOU PUT ON A CLONE BOX


AS YOU ARE ALL AWARE I HAVE STOPPED POSTING ON HERE BUT I HAVE MADE AN EXCEPTION TO THIS AS I DONT WANT YOUR CLONE BOXES AS DOOR STOPPERS

Hi Folks - ye will all get sainthood in my house . i always slagged the kids about being on chat lines etc but now is my turn . it was said on the thread that a fix for eurovox is in eamos library, can any of ye tell me the file name as if i muck up i will have 3 teenagers queueing to lynch me. the same wont thank me if i fix it though.

Originally posted by mocall:

---

Hi Folks - ye will all get sainthood in my house . i always slagged the kids about being on chat lines etc but now is my turn . it was said on the thread that a fix for eurovox is in eamos library, can any of ye tell me the file name as if i muck up i will have 3 teenagers queueing to lynch me. the same wont thank me if i fix it though.

---

Which Eurovox Red/Blue orMax V Black, yes they are all there depends what you want.

Originally posted by mocall:

---

Hi Folks - ye will all get sainthood in my house . i always slagged the kids about being on chat lines etc but now is my turn . it was said on the thread that a fix for eurovox is in eamos library, can any of ye tell me the file name as if i muck up i will have 3 teenagers queueing to lynch me. the same wont thank me if i fix it though.

---

Which Eurovox Red Blue or Max V Black they are as listed

Red >> UFL_Max_Red 10_04_08
Blue >> UFL_Max_Blue 10_04_08

Black > UFL MaxVKuro3 10_04_08

Its the black one I will give it a go tonight thanks for help

Dopes the Eurovox "fix" actually work ? I tried it yesterday, but the codes did not roll. I had to update manually. The Starview "fix" worked OK, the codes rolled automatically yesterday.

Originally posted by rehammot:

---

Dopes the Eurovox "fix" actually work ? I tried it yesterday, but the codes did not roll. I had to update manually. The Starview "fix" worked OK, the codes rolled automatically yesterday.

---

They both auto-roll the key's - have checked the Ev. several times, checked again (pressing the default key - yellow) when I seen your post and yes it did update the key's - but I know there is a problem on Cho**s. What area/provider are you having problems with.

Originally posted by mbh28:

---

hi,hoping that somebody can help, i have a starview original for about a year now, all has been great until last night when i decided to upgrade the firmware to version 4.o. everything went fine until i went to tune in the channels, it tuned in 138 channels (ok), but only about 34 channels actually work the rest are scrambled. i did a factory reset and checked the emu, and rescanned a few times but to no avail. can anybody help ? Thanks in advance

---

scan first then exit and save then set EMU to ON exit and wait for it to update

Is there a way of turning on emu on eurovox. I updated to new firmware and did powerscan. it found all channels but only Setanta ireland works. the usual codes updating message showing. am with c****s in cork.
Does anyone have a clue on fixing this. I really thought the firmware update would do it.

Originally posted by mocall:

---

Is there a way of turning on emu on eurovox. I updated to new firmware and did powerscan. it found all channels but only Setanta ireland works. the usual codes updating message showing. am with c****s in cork.
Does anyone have a clue on fixing this. I really thought the firmware update would do it.

---

There is a problem with Ch***s, the firmware does not auto-roll the key's, you will still have to manually enter your provider keys - believe a fix for your problem will be out in the near future from what I hear. Emulation will be on don't worry, but if you want to check Menu - Press OK on Language setting - type 1968 on your remote and it will appear Emulation and Emm Capture, whilst here type 1968 again and key table will appear.

Fix been worked on for Ch**us areas just patience required ;)

Ta Scouser I hope its ready before my beloved chelsea get to champions league final

7
any body got the new codes for dublin