9 April 2008 Codes are here!

NTHELL

00 - F5 70 E3 AD 3F 2D F8 F4
01 - 91 28 EF B5 7B 37 1F ED

TELEPEST

00 - D9 C8 9E BD 23 F6 3C 9D
01 - 60 20 E6 25 08 C8 7E 2A

C***W

00 - 95 DB 55 38 8D A0 5C 96
01 - D4 82 B9 87 8B 37 43 B7

 

sorry mate i tried the telepest code

still no luck

 

How do I input the codes for a Sagem dbox?
Thanks.

 

The twest codes arent working i have tried these.

 

what proivide code do i input for virgin media leeds.

what codes do I need for Virgin-Media ~Leeds

 

I tried the tele**** codes in Glasgow don`t work here either

 

It seems that virgin media have now scrapped all the T&W C&W and NTL, they are now all on the same frequency, so i guess we will have to wait for some new firmware. I have an original starview 1 box and up until yesterday mine would update automatically.

 

these codes are working

Telepest UK - 11.00am

00 = D8 9B E6 5E 3A 0C 45 AE
01 = B5 AA 58 2D 64 5E E1 05
Just 2nd line complete change.

 

hi there these codes working for me just now in the Glasgow area with telepest

00- D8 9B E6 5E 3A 0C 45 AE

01- B5 AA 58 2D 64 5E E1 05

HOPE THIS HELPS

 

hi there mate

do you now the codes for the nokia d box and eurovox northeast n**

and how to get it to the secret menu

Thanks

Paul

 

Got to menu and type 1570 then go to nagravision and if you are twest/virgin uses these codes

Telepest UK - 11.00am

00 = D8 9B E6 5E 3A 0C 45 AE
01 = B5 AA 58 2D 64 5E E1 05
Just 2nd line complete change.

 

HI how do you find the new codes after each roll? to save having to wait for someone to upload them to the fourm?

 

hi there mate thanks for the reply are the codes the same for the eurovox and nokia d box do you get in to the menu the same way

 

Could someone post the NTHell codes for belfast please.

 

thanks up and running again

 

Telepest UK - 11.00am

00 = D8 9B E6 5E 3A 0C 45 AE
01 = B5 AA 58 2D 64 5E E1 05

Many Thanks, these codes are working for me.

 

Hi,I can confirm that these codes for the glasgow area do work,many thanks

 

hi there i also live in the glasgow area and am experiencing similar problemsAs i have never entered the codes manually could you please help.

 

Hi All, Ive tried these keys in Newcastle and no luck.

I followed this from another site.

Might help someone, could someone tell me if their should be only two lots of keys or more?

Thanks

This was found on another site, hope it helps.

Guide to changing the Key codes on Nokia D box via remote control



NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don’t save changes. To get started follow instructions below:
1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.
You should now be looking at the files on the D Box.
2
. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!
3
. When you find the VAR file and you press OK, scroll to Keys & press OK
4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.
5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.
6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:
DO NOT POST KEYS
We are only changing one digit this time, in future you may have to change more digits.
7.
When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!
8
. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.
9
. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.
10
. You should now have changed the code, to get back to the TV screen, press home.
11
. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!


SORRY ABOUT THE KEYS DEVILFISH BUT THEY WERE OLD IT WILL NOT HAPPEN AGAIN

 

I TRIED THOSE CODES FOR TELEPEST (EURO-VOX MAX) AND THERE NOT WORKING
I LIVE IN BIRMINGHAM U.K

I ENTERED

NAME- 54 01 KEY- 00 KEY DATA- D8 9B E6 5E 3A 0C 45 AE
NAME- 54 01 KEY- 01 KEY DATA- B5 AA 58 2D 64 5E E1 05

COULD SOMEONE PLEASE REPLY. OR PRIVATE MESSAGE ME!