cloned starview have i got a cloned first generation starview box

i think my box is first generation box it has 13x7 vents on the lid starview api ver 2.57e boot ver 7.0 16 aug 2006 on system information but the remote is fake it has two indentations on back ,scart is on the left,lead to plug into the mains is on the righ can somebody tell me if it is a firsf generation real box or a cloned box thanks

 

box is genuine, remote is not but still works okay.

 

what firmware do i need to download to get my box to auto roll

 

Go to http://www.eko.4shared.com and go into first the 'Starview' folder then the 'Firmware' folder. Download the file CryptStar-v14-GenuineOnly.zip file and extract the contents.

*NOTE* you will need a NULL MODEM CABLE and not an RS232 CABLE from your local Maplins store - Item code L71BT to continue.

UPLOADING SOFTWARE TUTORIAL

1. Plug Starview in at the mains.
2. Plug in null modem cable and join up box with PC using COM port on PC (there is only one socket for this on the Starview you cant go wrong);
3. Open up GTRom loader
4. Click on "BIN File" on GTRom and load the Auto update BIN file that you have saved earlier
5. Now click download button and you will see the file being downloaded.
6. Once complete a message will appear saying something like "download successful".
7. Ideally you should try and get a bin file channel list for your area and load this as well it will save a lot of time.
8. Alternatively, plug box in and press Menu on remote, installation, choose your cable provider, then move down to automatic scan and press ok.
9. Once all channels have been found press exit back to TV screen.
10. Now press menu, parental control, press ok. Then press i then 2004. Move down to Key Emu and change option to on. Press ok , then exit back to TV Screen.
11. If entering the code of 2004 does not work, substitute with the code of 1570.