I have lost all my channels and have been unable to get them back any ideas out there. thanks.

Originally posted by markblear:

---

I have lost all my channels and have been unable to get them back any ideas out there. thanks.

---

where are you?try and be a bit more specific please

in sunny RUNCORN, SILVER ORIGINAL STARVIEW 2 I think. I Usaully change cw code but now thats all gone . . .!

Originally posted by markblear:

---

in sunny RUNCORN, SILVER ORIGINAL STARVIEW 2 I think. I Usaully change cw code but now thats all gone . . .!

---

if there has been a code change in your area you will have to go elsewhere because codes are no longer allowed to be posted in this forum

Tryed looking around but drawn a blank so far !

Originally posted by markblear:

---

Tryed looking around but drawn a blank so far !

---

the best advice i can give to you is to update your box with autoroll firmware

been to link, which one do I load all goes over my head and dont want to kill my box, mind its no good at the moment anyway . . !

Originally posted by markblear:

---

been to link, which one do I load all goes over my head and dont want to kill my box, mind its no good at the moment anyway . . !

---

press menu system info and tell me what it says

api ver :4.00e_E
boot ver:7.0
7.jun.2007

Originally posted by markblear:

---

api ver :4.00e_E
boot ver:7.0
7.jun.2007

---

thats the starview 1
Ok you will need the gtrom v.400rar loader which can be found in eamo’s library (starview software) which can be found here http://www.4shared.com/dir/3042613/f6e3421c/sharing.html
Then you will need the crypstar-v1.4-genuine only zip which can be found in the firmware folder ,download the gtrom loader and save it to your desktop,download the crypstar v.400 and save that to your desktop,open the gtrom loader it should have the api only box checked,clik on bin file and find where you saved the crypstar file (desktop) open that in the loader,connect the box in standby to your pc (null modem cable) please note the box should not be connected to the tv, click download on the gtrom loader and you will see a percentage bar on the loader wait till it competes the download( a pop up box should appear and say download compete) then disconnect from the pc and that’s it.then go through the installation process from scratch

thanks,got the files but how do I open them, windows just keeps coming up open save cancel, when I press open it just repeats over and over.

Use winrar or other similar program to unpack them. You will find winrar in Eamos as well.

Originally posted by markblear:

---

thanks,got the files but how do I open them, windows just keeps coming up open save cancel, when I press open it just repeats over and over.

---

cheers sc0ucer only popping in for a mo,make sure you have a null modem cable mark and if your pc or laptop has no serial port you will need a usb to serial adapter
These are the two items you require, they are only for reference and can be got much cheaper on fleabay. Null modem info http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6 USB Adapter info http://www.maplin.co.uk/Search.aspx?crit...&source=15&SD=Y

Cheers Karl just heading myself ;)

having no joy. keep getting a message model name does not correct. going nowhere fast. sorry kid to be a pain.

Originally posted by markblear:

---

having no joy. keep getting a message model name does not correct. going nowhere fast. sorry kid to be a pain.

---

ok lets make sure its a starview 1 has it starvirew or the box printed on on it?

Hi guys, have a starview the box 25 vents, downloaded gt rom and cryptar but after about 30 seconds it comes back failed!! help............please

Originally posted by djmick:

---

Hi guys, have a starview the box 25 vents, downloaded gt rom and cryptar but after about 30 seconds it comes back failed!! help............please

---

if you have starview th box you put the wrong firmware on you should have 4.50 forIreland or 4.51 for the uk is this the box you have?

i have the box starview 3 and cannot get to my cas page to turn key emu on. system says API ver 7.08e and boot ver 8.00. tried doing firmware update with null modem cable and usb adaptor and keep getting flash fail. [ tried 1570, 2004, 2007 ]can anyone help please

ok just tried different software and same problem!!!!!!!!!! please help

hi, i have a sv clone box, with 7x18 vents on the top, can you plz tell me wht software i need to update th box, will rs232 female to male will work to connect the box to a laptop? thanks

Originally posted by dilber:

---

hi, i have a sv clone box, with 7x18 vents on the top, can you plz tell me wht software i need to update th box, will rs232 female to male will work to connect the box to a laptop? thanks

---

I have already told you how here http://forums.afterdawn.com/thread_view.cfm/663877

Originally posted by djmick:

---

ok just tried different software and same problem!!!!!!!!!! please help

---

Starvi*w Updating Firmw@re : http://forums.afterdawn.com/thread_view.cfm/663923

soughted last nt, it was the c,star 400 and not the c,star 1.4 gen software. thanks

guys and gals big problems here with a starview 2 box i downloaded a bad flash file i have tried all the trouble shooting with no joy(turning box off and start the down load etc etc) i am now left with 1 green dash on the right hand side of the box i am looking to try and put on starview 2 version 3.00 api may 2007 to see if this will work has any 1 got it its nit in the old firmware in eamos site help please