hi can someone tell me how to do a factory default on my eurovox max 2008 and if i do one will the new firmware i put in the other day be gone

Originally posted by rielsn:

---

hi can someone tell me how to do a factory default on my eurovox max 2008 and if i do one will the new firmware i put in the other day be gone

---

go to menu and go to config and go to clear data and then factory default and no it wont clear the new firmware

thanks tempo i went into factory default it has erase all channels also in factory default it has symbol rate 6952 and 6887 do i get rid off 6952

Originally posted by rielsn:

---

thanks tempo i went into factory default it has erase all channels also in factory default it has symbol rate 6952 and 6887 do i get rid off 6952

---

6887 for n*l then rescan on 6887

6952 in factory default do i clear that and clear channels in factory default also there is a box beside 6952 with 6887 in it do i erase everything tempo

Originally posted by rielsn:

---

6952 in factory default do i clear that and clear channels in factory default also there is a box beside 6952 with 6887 in it do i erase everything tempo

---

just do a factory default on the 6887 box and when you power scan it deletes the channels any how

iv tried that but still only 94 channels tempo

Originally posted by rielsn:

---

iv tried that but still only 94 channels tempo

---

so your missing 44 channels how many transponders are you picking up

sorry tempo im new to this what do you mean by transponders

Press menu > user Installation > pin = 1004
And post what frequencies are in the list

Where are you located and what provider are you with ?

im located in north county Dublin my provider is n*l my freq are
258.000
274.000
290.000
306.000
322.000
338.000
354.000
370.000
386.000
symbol rate 6.887

Ok those freq are incorrect

Here is what you need

NTL Dublin EV

291.000 Mhz 6.887 Maud QAM64
299.000 Mhz 6.887 Maud QAM64
307.000 Mhz 6.887 Maud QAM64
315.000 Mhz 6.887 Maud QAM64
323.000 Mhz 6.887 Maud QAM64
339.500 Mhz 6.887 Maud QAM64
347.500 Mhz 6.887 Maud QAM64
355.500 Mhz 6.887 Maud QAM64
363.500 Mhz 6.887 Maud QAM64
371.500 Mhz 6.887 Maud QAM64
379.500 Mhz 6.887 Maud QAM64
394.000 Mhz 6.887 Maud QAM64
402.000 Mhz 6.887 Maud QAM64


If you are missing frequencies.
To add these go to menu,installation,user installation and use the on button guide to add frequencies ( Green / Channel Edit , Red / Add Freq ). Info button will name them as you like .

For any frequency that you want to manually scan you select it in your list first by pressing OK when it is highlighted, ( a tick will appear beside the one you select), then you press the blue button to manually scan that frequency.

celtic iv tried putting in those freq but alot of them dont work the signal strenght drops and turns red when i put them in any other idea,s please