I have the pvr uploader program, the channel editor software, the null modem cable that came with the box and a serial/usb convertor
I have installed the driver that came with the serial/usb convertor
I connect the stb and pc, start the uploader, select com 3 and the channel data option then click on upload, I choose file name then hit save
A progress bar opens saying uploading, but stays at 0% I have waited ages nothing happens
Originally posted by steady--1: I have the pvr uploader program, the channel editor software, the null modem cable that came with the box and a serial/usb convertor
I have installed the driver that came with the serial/usb convertor
I connect the stb and pc, start the uploader, select com 3 and the channel data option then click on upload, I choose file name then hit save
A progress bar opens saying uploading, but stays at 0% I have waited ages nothing happens
I have tried version 3.36 and 4.01 of the loader
Hi
Have you had a looked in device manager to be sure your usb/serial driver has allocated Com 3 as your communication port?. If it has try borrowing or using a PC with a 9pin com port, usb converters can be a pain in the a.
jbvid
Also have you put the box into flash mode? To to this you power on the box and using the remote press ok and exit a number of times then b30 or b31 will be displayed.
