Eurovox Max V 2008, Power Scan not detecting any channels

Hi I was wandering if someone could help me.

I just purchased a Eurovox Max V 2008,
I managed to Flash the box fine with UFL_MaxV_Kuro3_18_04_08

I set the box to do a power scan but i'm not getting any channels.
I've ran a scann a couple of times now but still no joy.

Can anyone help. Am i missing something?

 

What symbol rate are you using and are you sure it is correct for your provider?

 

First I didn't try anything but then i tried 6887 as I'm in Vir**n media area / N*L.

Still no joy. I know that it's the not the cable because if I plug in my original Vir**n box it works.

 

I been looking around and I found the fix that worked for me.
I thought I'd post it here incase someone else comes across the same problem

http://www.techwatch.co.uk/forums/25824-euro-vox-max-v-2008-loading-problem.html


Re: Euro vox max v 2008 Loading Problem

--------------------------------------------------------------------------------

Sounds like it is flashed but not scanned. Press menu, installation,user installation,(if it asks for a pin use 1004). Press yellow button and do a full powerscan on your provider symbol rate, 6887 for N**, 6952 for others.

When scan completes, exit back to user installation, you should now see a lot of frequencies, (TPs), press red button to update channels. Screen will go blank for a minute,it will then pull in the channels for you. After scan exit all the way out to view channels.

If it says updating codes put it on Sly sports and let it update.

 

Think you will find the guy that posted that is here Well under a different name

 

thanks for the info, i had done the powerscan but thought it didnt work cos i didnt wait for the code to update. Now i am sorted setanta is back too....thank you once again for the info