Hi all

just new to forum and not exactly a techie so please bear with me :-)
I have recently purchased the Box Super but can't get it to work as when I try to auto scan it doesn't find any channels. I have tried inputting codes manually, have set / reset EMU and done the whole menu 1570 thing but no joy.

I have had no problems with the original st**view boxes but this one has got me well and truly beaten.

I got it for my son for his birthday so feel a bit rotten but can't really afford to get another one.

I have looked at other threads and tried a number of suggestions but no joy as no matter what I try doesn't seem to work. I did have it going at one point but couldn't set channels in any order and they jumped around 'unprompted.

If anyone could help I would really appreciate it

Thanks a lot
KA

if you can access the cas menu it must be preflashed can you press menu system info and see what it says

Thanks for prompt response ...at work at moment...will respond with info you suggest I look for later
Cheers
KA

Hi Karljd

I done what u suggested and the info that comes up is as follows:

THE BOX Super
API Ver: 6.00e_E
Boot ver: 8.0
4.Feb.2008

As you probably have guessed doesn't mean a lot to me !!! :-) but if you could tell me what I need to do next would be appreciated

Cheers
KA

have you your coaxil plugged into the cable input on the box?have you your scart connected to the tv scart on the box and not the vcr?and is the connection split i think it may be a cc problem

Hi again and thanks for bearing with me,

I'm pretty confident that everything as it should be.I have an older version st**view in my living room and this one is for my sons bedroom so I have swapped boxes around - the connections are as you have described. The older version works OK in son's room & living room but the 'super' not working in either. Getting internet OK in son's room as well so don't think it is a 'signal problem'.

Cheers
KA

Originally posted by stevgal:

---

Hi again and thanks for bearing with me,

I'm pretty confident that everything as it should be.I have an older version st**view in my living room and this one is for my sons bedroom so I have swapped boxes around - the connections are as you have described. The older version works OK in son's room & living room but the 'super' not working in either. Getting internet OK in son's room as well so don't think it is a 'signal problem'.

Cheers
KA

---

I think the best solution is a factory reset and then flash your box with the 7.05 latest, this should sort you:
http://www.4shared.com/account/file/4681...Super_705e.html

Thanks DesB

I'll give that a go this evening when I get a chance and let you know how things go.

Here's to 4 in a row next season (should really be going for 9!!) C'mon the Hoops !!!!

KA

Cheers DesB

Brilliant...that seems to have done the trick - to a certain extent !! I can now access channels though the only thing is I can't get them sorted into any order using the remote. For instance if I try and sort them into any sort of order I can't get the channel number to go to number 1, 2 , 3 etc as it 'starts at 101 with about a dozen channels having this number.

If I use the number keys on the remote to look for a channel it stays at the same channel and I can only move to other channels one at a time using the scroll arrows or by using the OK button and going into the channel list.

Sure my son can live with that though but if any advice on how to sort this glitch then that'd be great

Many thanks for the help you and karljd have given me ...it is really really appreciated and my son is well pleased

Cheers
KA

If you updated to 7.05 , the best bet now is a factory setting and fresh installtion, unfortunally thats the way that b0x works and ch@nnels do start at 101 (Basic Ch) , 201 , (Entertain ) , 301 (Movies) etc , they are sorted out like the N*L digital box for you


Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on

English > Installation
Choose Provider etc
Automatic Scan
Press OK
Channels found
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit

Cheers for that Celtic,

I'll give it a go tonight...didn't realise that was how channels set up....every day's a school day !!! I'll let you know how it goes`

Thanks again mate

KA

Thanks for all your help folks...thats everything sorted
Hail !! Hail!!

Cheers
KA

Glad you got it sorted and well done :)

Hey sorry bother anyone but i done all of the above and i still keep getting 0 progs found???

The box was working b4 so we have the connectiona dn all can anyone help it wud be greatly appreciated

Originally posted by lpoolgr8:

---

Hey sorry bother anyone but i done all of the above and i still keep getting 0 progs found???

The box was working b4 so we have the connectiona dn all can anyone help it wud be greatly appreciated

---

when you say The Box, which box have you as the above is ONLY for the Super 3 box,

And make sure that all connections are pushed in fully into the correct inputs/outputs

des should have said sellect correct provider.lol

hello sorry about this but i've only just got a box super and channel4 was gone with a few other channels so i tryed to fix it and ended up with only rte1 and 2 thd tv 3 no other ones work they did work when i got it but they still come up on the channel and say whars on but then info comes up with scrambled or bad channel on it all help wecome doing my nut

Originally posted by natojack:

---

hello sorry about this but i've only just got a box super and channel4 was gone with a few other channels so i tryed to fix it and ended up with only rte1 and 2 thd tv 3 no other ones work they did work when i got it but they still come up on the channel and say whars on but then info comes up with scrambled or bad channel on it all help wecome doing my nut

---

factory reset 0000 to delete,autoscan again and when finished exit out,-menu-1570 key emu to on and exit out.