AfterDawn Forums

This..Sucks my psp prong for charger broke off,can it be fixed?

This discussion thread has 20 messages.

#1
Topic: I was putting in charger like I normally do,an when i pulled it out,the metal prong came out too.Was even stuck in the charger for a min,till I pulled it out.Is this fixable?Please tell me it is -_-
▼▼ This topic has 19 answers - they are below this advertisement ▼▼
AfterDawn Advertisement
#2
LWiggy09 Suspended account
no get a new battery bit and put it in!
i have problem with my turn on switch!
good luck
#3
it depends on where the prong broke and if you know how to solder.
#4
You could aways purchase the battery charger that holds the battery itself and plugs into a wall outlet. I believe most retailers are still selling them, I'm not sure if there is a difference in the charger for fat and slim batteries though, so you might want to check the package first.

To seed or not to seed is that the Question?
#5
as with any item that requires the power source from an outlet, it is truly.....unsafe, (particularly in this case)to repair said 'prong.'

if the wire itself, was damaged....yes that can safely be done....but again, you truly need to know what your doing...and how do solder. BUT i strongly reccomend......as its the prong.....you not attempt this. Though costly......it has the potentical...to be far less costly...to simply purchase a new..charger.

Yes, i do a lot of wireing.....and yes, know what im talking about. Please, avoid this 'fix.' Though, indeed.....your call.

:)
#6
sorry for the typeo's.......mah fingers, dont always connect to mah brain lol. :| you get the jist......thats the important note. :)
#7
ok.....wait! i have one....safe....suggestion. if you know how to read....whats on the adapter.....the info....and can locate..an 'exact' same......adapter......(might find it at a thrift store...often then have a box of adapters) BUT...ensure....the info is IDENTICAL>>>>>>>>noooooooooo difference!!!!! take the ruined one with you......and CHECK.

IF, you are successful....then cut the wire on both...a fair distance FROM the adapter. FIRST......mark one side..of the dual (if its like that and i hope it is....) wire with a felt pen. lay them both out.....in the same direction...the exact same way....side by each. This ensures its done accurately.

Once done......strip the wires.....and use caution. any missing wire from the inside...can result in umm "bad news huh" so....at that point....you now connect.....the felt marked wire.....with the 'other' felt marked wire. the unmarked to the unmarked. And....solder each. you must do this in order for the wires to make a proper conduct. You risk 'shorts' if you dont.

Dont whatever you do.......cut away allllllll the felt marked indication you have previously done. so ensure......you make the mark long!!!!!

Now, DONT let the raw wires touch. either wrap them with electrical tape.....seperately. OR....i have found (though again, ensure done in a well covered way.....) hot glue the wire. this provides proteciton.....and the insulation required on each wire. if you were successful......it should work. if not...well, you now have some experience and know how for something else.....and it only cost you a buck or two..to find out.

IF,,,,,you are working with, a single solid wire FROM the adapter..you naturally do not....have to mark with felt. Though, the remaining process is the same.

Good luck :)
#8
and no lmao. i do NOT take responsibility for your 'attempt' in anyway.

i have done this several times with success and no tragic results.

the call to follow the instruction....is all yours along with...any unpleasent results lol.

just being clear.

:)
#9
The charge can be fixed, by purchasing a new PSP powerboard and connecting it to the main PSP motherboard, these cost about 30 and arent such a pain to fit.



Mon Deriere
#10
mom123 that has got to be the most painful thing ive heard
This message has been edited since its posting. Latest edit was made on 01 Sep 2008 @ 1:28

Wanna play youtube on your psp heres my guide http://forums.afterdawn.com/thread_view.cfm/552565#3342784

Psp history 2.60-2.71-1.50-3.40oe-a-3.52m33-3.52m33-4-3.71m33-2-3.71m33-4-3.80m33-4-3.80m33-5-3.90m33-3 with kernal addon
#11
well drop me a email and i can get you one cheap i got a 2 spare psps that i am partin out
*email removed*
This message has been edited since its posting. Latest edit was made on 10 Dec 2008 @ 16:50
#12
Originally posted by Quisimodo:
The charge can be fixed, by purchasing a new PSP powerboard and connecting it to the main PSP motherboard, these cost about 30 and arent such a pain to fit.

Look the peice that broke is a little yellow square that had 2 wires that has a connecter at the end that "plugs" into the maid board, this peice is held in by one screw its relitivley easy to replace its one of the first things you see when you crack open the psp (you will void your warrenty) but if you dont have a recipt then somy wont work with you at all...
if you need help with replaceing this i can walk you thru the whole 5 min (at most) process its easy even for a NooB

<(MikiEActioN)>
#13
pspguy420 Suspended due non-functional email address
I found a psp repair site that does any repair cheap. it has the lowest prices on the internet. it is psprepairservice.synthasite.com
#14
Been a LONG time since I been here.I even forgot I posted this! lol.Anyway so I found a solution for now.I am able to put prong back in(doesnt stay in.)but as long as I set the charger in nice an dont move it I can charge it.BTW I already voided warranty I think(CFW lol).


thanks for all the replies guys,appreciate it!


Also to not make your replies worthless.I know about that the yellow part can be replaced,I would just rather not open psp though.
#15
Also "mom123" I believe you are reffering to the actual charger.That was not the problem,it was the little prong the charger goes into,inside psp.


*Double POST*
#16
If its just the metal prong that is inside the yellow ring on the bottom right dont worry. If you're using CFW then go into your config menu and set it to charge from a USB. Just means u have to charge from ur comp.
#17
Its a psp 1000 man..But thanks anyway(they dont support USB charging).
#18
All you got to do is replace the entire power charge port. I just bought one from a certain auction site for seven bucks.


#19
Originally posted by PsYAndrew:
Its a psp 1000 man..But thanks anyway(they dont support USB charging).
Aw sorry man I didn't know they didnt support it. Apologies.
#20
Originally posted by 713tex:
All you got to do is replace the entire power charge port. I just bought one from a certain auction site for seven bucks.
I've done the same thing myself. It's not hard to do. No soldering is involved.
This discussion thread has been automatically closed, as it hasn't received any new posts during the last 180 days. This means that you can't post replies or new questions to this discussion thread.

If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.